Seibertron.com Energon Pub Forums

Has anyone heard any news on a possible reissue of the Dinobots by either Takara or Hasbro? I figured Takara would have by now considering they released the freakin' Insecticons. I bought the classics Grimlock but it's just not the same. It would be great if the original G! version was available as well as the rest of the team.

na man to y knowledge there not going to. Hey is the reissue series over or not cause i don't think they've made any more recently have they?

Nope, no idea. We dont even know if we're gonna get anymore reissues (apart from Soundwave in the US and the few reissues avaialble in the UK, which are already out, and Takara's re-reissue of Megs in Japan) let alone who would be reissued next. Offcially both Hasbro's and Takara's reissue lines are on hiatus I think.

I heard they lost the Dinobot molds. I guess they could always reverse mold it or make a new one with computers, but it's like the combiners. Why spend so much money making them and charging so much money, when a Japanese kid can go buy the same item as a knock off for a small fraction of the price? That's why there's no love for Grimmy&Co.

As far as I know, they have the swoop mould. But as for the other four, I thought they were all damaged.

An example of the swoop mould being used is the recent surfacing of the KO Swoops on eBay.

Down_Shift wrote:As far as I know, they have the swoop mould. But as for the other four, I thought they were all damaged.

An example of the swoop mould being used is the recent surfacing of the KO Swoops on eBay.

Becareful with your last sentence. They are not using Takara's mold for the KO, they made their own.

can someone post up a addy for these fake swoops so i can see them.

SABER_PRIME wrote:can someone post up a addy for these fake swoops so i can see them.

I 2nd that motion. speakin of Reissues..What was the last one Takara released?

Vile MK III wrote:

SABER_PRIME wrote:can someone post up a addy for these fake swoops so i can see them.

I 2nd that motion. speakin of Reissues..What was the last one Takara released?

TFC 21 Blaster? not up to date so i might be wrong. (i don't count the re-release of TFC megs)

Star Jammer wrote:

Vile MK III wrote:

SABER_PRIME wrote:can someone post up a addy for these fake swoops so i can see them.

I 2nd that motion. speakin of Reissues..What was the last one Takara released?

TFC 21 Blaster? not up to date so i might be wrong. (i don't count the re-release of TFC megs)

...wow, To me, that was like, ages ago. Takara needs to wake up and get reissueing...like Springer or the series 3 (2010) minibots.

Well, maybe the success of the WST Dinobots will get Takara to redo the Dinobot molds. It could happen...

Vile MK III wrote:

Star Jammer wrote:

Vile MK III wrote:

SABER_PRIME wrote:can someone post up a addy for these fake swoops so i can see them.

I 2nd that motion. speakin of Reissues..What was the last one Takara released?

TFC 21 Blaster? not up to date so i might be wrong. (i don't count the re-release of TFC megs)

...wow, To me, that was like, ages ago. Takara needs to wake up and get reissueing...like Springer or the series 3 (2010) minibots.

Galvatron wasn't the last reissue?

GetterDragun wrote:

Down_Shift wrote:As far as I know, they have the swoop mould. But as for the other four, I thought they were all damaged.

An example of the swoop mould being used is the recent surfacing of the KO Swoops on eBay.

Becareful with your last sentence. They are not using Takara's mold for the KO, they made their own.

KO companies made their own moulds? Man, that's hardcore. You'd think it would be hard to make and use a mould of a previously used figure by one of the big wigs like TT without getting shut down post haste.

Down_Shift wrote:

GetterDragun wrote:

Down_Shift wrote:As far as I know, they have the swoop mould. But as for the other four, I thought they were all damaged.

An example of the swoop mould being used is the recent surfacing of the KO Swoops on eBay.

Becareful with your last sentence. They are not using Takara's mold for the KO, they made their own.

KO companies made their own moulds? Man, that's hardcore. You'd think it would be hard to make and use a mould of a previously used figure by one of the big wigs like TT without getting shut down post haste.

hmmm i remember reading a story that said the ko swoop was made from a mold left in an old hasbro factory. Where did i read that? Don't know. Coulda been on here. Could have been complete BS.

Gutter Bunny wrote:

Down_Shift wrote:

GetterDragun wrote:

Down_Shift wrote:As far as I know, they have the swoop mould. But as for the other four, I thought they were all damaged.

An example of the swoop mould being used is the recent surfacing of the KO Swoops on eBay.

Becareful with your last sentence. They are not using Takara's mold for the KO, they made their own.

KO companies made their own moulds? Man, that's hardcore. You'd think it would be hard to make and use a mould of a previously used figure by one of the big wigs like TT without getting shut down post haste.

hmmm i remember reading a story that said the ko swoop was made from a mold left in an old hasbro factory. Where did i read that? Don't know. Coulda been on here. Could have been complete BS.

Wow, can you imagine what it would be like if you happend to just stumble over the old swoop mould! I know the first thing I would do.

Vile MK III wrote:

SABER_PRIME wrote:can someone post up a addy for these fake swoops so i can see them.

I 2nd that motion. speakin of Reissues..What was the last one Takara released?

ebay just got bombarded with a lot of fake swoops, there had been just 1 the past 2 days since the other one i made a thread about... http://search.ebay.com/search/search.dl ... category0= ... look towards the bottom of the page before the ebay stores items, and you will see 4 of them... and also there is now a prototype/test shot, ..interesting..

Down_Shift wrote:

Gutter Bunny wrote:

Down_Shift wrote:

GetterDragun wrote:

Down_Shift wrote:As far as I know, they have the swoop mould. But as for the other four, I thought they were all damaged.

An example of the swoop mould being used is the recent surfacing of the KO Swoops on eBay.

Becareful with your last sentence. They are not using Takara's mold for the KO, they made their own.

KO companies made their own moulds? Man, that's hardcore. You'd think it would be hard to make and use a mould of a previously used figure by one of the big wigs like TT without getting shut down post haste.

hmmm i remember reading a story that said the ko swoop was made from a mold left in an old hasbro factory. Where did i read that? Don't know. Coulda been on here. Could have been complete BS.

Wow, can you imagine what it would be like if you happend to just stumble over the old swoop mould! I know the first thing I would do.

first thing...make 1000's of diaclone swoops reissues
2nd thing sell it for a fortune on ebay.

Gutter Bunny wrote:first thing...make 1000's of diaclone swoops reissues
2nd thing sell it for a fortune on ebay.

Well I was thinking I would **** a brick, THEN make a fortune off eBay. But I really like where you're going with the Diaclone Swoop idea.

also, besides the various sellers in the hong kong area, maybang apparently is one of the ebay sellers with the ko swoop..anybody ever shop with them?

Down_Shift wrote:

Gutter Bunny wrote:first thing...make 1000's of diaclone swoops reissues
2nd thing sell it for a fortune on ebay.

Well I was thinking I would **** a brick, THEN make a fortune off eBay. But I really like where you're going with the Diaclone Swoop idea.

besides a diaclone, i would probably make some other colors as well, just for rarity's sake..ie: clear, black, gold, etc..

buddha-con wrote:

Down_Shift wrote:

Gutter Bunny wrote:first thing...make 1000's of diaclone swoops reissues
2nd thing sell it for a fortune on ebay.

Well I was thinking I would **** a brick, THEN make a fortune off eBay. But I really like where you're going with the Diaclone Swoop idea.

besides a diaclone, i would probably make some other colors as well, just for rarity's sake..ie: clear, black, gold, etc..

oh for the love of god please don't use gold plastic! just paint over white plastic with the same paint they use on the lucky draw figures. Gold plastic cracks like no other, seriously... gold plastic = bad. very very very bad.

Head Shot wrote:

buddha-con wrote:

Down_Shift wrote:

Gutter Bunny wrote:first thing...make 1000's of diaclone swoops reissues
2nd thing sell it for a fortune on ebay.

Well I was thinking I would **** a brick, THEN make a fortune off eBay. But I really like where you're going with the Diaclone Swoop idea.

besides a diaclone, i would probably make some other colors as well, just for rarity's sake..ie: clear, black, gold, etc..

oh for the love of god please don't use gold plastic! just paint over white plastic with the same paint they use on the lucky draw figures. Gold plastic cracks like no other, seriously... gold plastic = bad. very very very bad.

ya gold plastic is terrible, but gold paint makes me smile. I love Lucky Draw figures, like SL-Omega Supreme or Megalo Convoy. Just so damn great looking.

edited ebay item of ko swoop

My guess is that Takara will wait until the Movie line is complete before reissuing the Dinobots.

buddha-con wrote:it seems that maybang is not sure if they have an original or a remake. There was never a link here... for a fairly well known online retailer, they should know they clearly did not stumble upon some originals.

OH NO!! Thats the one i'm bidding on. Don't draw attention to it because i'm trying to win it for the cheapest price.