Seibertron.com Energon Pub Forums

News Credits: 437 · by **Sabrblade** » Fri Nov 02, 2012 3:36 pm

Decatron wrote:I've seen that 3rd party one which seems okay, but always wanted an official modern Reflector. Hopefully he gets his own new mold(s).

More than likely he'll be a redeco of Perceptor since that was Hasbro's original plan all along.

News Credits: 251 · by **Mindmaster** » Fri Nov 02, 2012 3:39 pm

Reflector is a go-getter for me. Hardhead.... Gimme some images, and we'll look into it.

I'm also curious about Grimlock's position. I'd argue he would likely be the FOC Voyager, but someone already pointed out he's priced as a Deluxe. Didn't Takara pull Classics Grimlock into United already?

Shockwave is interesting as well. His FOC toy is already being used in the Japan's Arms Micron line.

News Credits: 437 · by **Sabrblade** » Fri Nov 02, 2012 3:48 pm

Mindmaster wrote:I'm also curious about Grimlock's position. I'd argue he would likely be the FOC Voyager, but someone already pointed out he's priced as a Deluxe. Didn't Takara pull Classics Grimlock into United already?

They used Classics Grimlock for Henkei! Henkei! Grimlock.

News Credits: 402 · by **Mkall** » Fri Nov 02, 2012 3:55 pm

Man, a United Grimlock would look so awesome.

News Credits: 251 · by **Mindmaster** » Fri Nov 02, 2012 4:01 pm

Sabrblade wrote:
Mindmaster wrote:I'm also curious about Grimlock's position. I'd argue he would likely be the FOC Voyager, but someone already pointed out he's priced as a Deluxe. Didn't Takara pull Classics Grimlock into United already?
They used Classics Grimlock for Henkei! Henkei! Grimlock.

I know they released it in Japan sometime. Just wasn't quite sure which of their lines it was. Unless its a re-release or a slight redeco?

News Credits: 4 · by **craggy** » Fri Nov 02, 2012 4:28 pm

what currency are those SRPs in?

News Credits: 437 · by **Sabrblade** » Fri Nov 02, 2012 4:58 pm

Wait, why are these listed as United figures when that line has more or less been converted into PCC via United EX and replaced by the Japanese Generations line?

News Credits: 1 · by **KNM2012** » Fri Nov 02, 2012 5:09 pm

All I can say is if "Hard Head" is a Headmaster and "Gremlock" looks more like his G1 counterpart, I will have at least two UNITED pieces in my collection. I swore that I'd buy anything that is an official (read: Takara Tomy) Headmaster figure, and need a Grimlock to cover the "exclusive" Supreme Commander portion of my collection. :-B

Now if Takara Tomy will consider either reissuing Skyfire or adding a Jetfire to UNITED, then I'll be happy with the lack of a proper background for this series. :lol:

News Credits: 241 · by **Jelze Bunnycat** » Fri Nov 02, 2012 5:39 pm

Sabrblade wrote:Wait, why are these listed as United figures when that line has more or less been converted into PCC via United EX and replaced by the Japanese Generations line?

The official site still lists both United and United EX in the same section. It would seem logical to use:

- United for Classics up to Generations plus their repaints
- United EX for PCC
- Generations for FoC molds

Which leads me to believe United Grimlock is actually a re-release of Classics Grimlock, not the FoC one. They've done it before with Bumblebee and Rodimus.

News Credits: 251 · by **Mindmaster** » Fri Nov 02, 2012 5:42 pm

JelZe GoldRabbit wrote:
Sabrblade wrote:Wait, why are these listed as United figures when that line has more or less been converted into PCC via United EX and replaced by the Japanese Generations line?

The official site still lists both United and United EX in the same section. It would seem logical to use:

- United for Classics up to Generations plus their repaints
- United EX for PCC
- Generations for FoC molds

Which leads me to believe United Grimlock is actually a re-release of Classics Grimlock, not the FoC one. They've done it before with Bumblebee and Rodimus.

What makes even more sense in response to this is Grimlock's newfound popularity, possibly contributing to an "Evolution of Grimlock" pack, similar to the three pack "Evolution of Bumblebee" we seen several years back.

News Credits: 1 · by **rpetras** » Fri Nov 02, 2012 6:40 pm

Exciting

News Credits: 1 · by **KNM2012** » Fri Nov 02, 2012 6:56 pm

JelZe GoldRabbit wrote:
Sabrblade wrote:Wait, why are these listed as United figures when that line has more or less been converted into PCC via United EX and replaced by the Japanese Generations line?

The official site still lists both United and United EX in the same section. It would seem logical to use:

- United for Classics up to Generations plus their repaints
- United EX for PCC
- Generations for FoC molds

Which leads me to believe United Grimlock is actually a re-release of Classics Grimlock, not the FoC one. They've done it before with Bumblebee and Rodimus.

It would be very odd for them to use "Classics" Grimlock on account that they used it for the Henkei! line. So honestly, seeing how the Beast Wars pieces were originally unused "anniversary" molds, I am starting to hope and worry (at the same time) that they will not be using the Walmart exclusive "Transformers: Dinobots" version.

News Credits: 437 · by **Sabrblade** » Fri Nov 02, 2012 7:14 pm

KUMA-NIN Maximus wrote:It would be very odd for them to use "Classics" Grimlock on account that they used it for the Henkei! line.

Like Jelze said, they resused both Classics Bumblebee and Classics Rodimus, not to mention Classics Megatron, for United.

KUMA-NIN Maximus wrote:So honestly, seeing how the Beast Wars pieces were originally unused "anniversary" molds, I am starting to hope and worry (at the same time) that they will not be using the Walmart exclusive "Transformers: Dinobots" version.

Doubt it. They haven't used a mold that old for United yet, as that was a 1996 Beast Wars mold redecoed for the 2003 Wal-Mart Dinobots release.

News Credits: 1 · by **KNM2012** » Sat Nov 03, 2012 12:29 am

Sabrblade wrote:Like Jelze said, they resused both Classics Bumblebee and Classics Rodimus, not to mention Classics Megatron, for United.

I'll remember that when I look at the reason why they reissued those figures. But it also does not explain why the list has every Generations/Fall of Cybertron figure being listed as a UNITED figure.

Or did you not mention that on the fanpage I found you tied to? :-?

Oh, and please note that I respect Jelze on account she listens to those who disagrees with her (HINT!)... And know that making said conclusion is a common thing to do. But do not use her as a means of being right. Thanks.

Sabrblade wrote:Doubt it. They haven't used a mold that old for United yet, as that was a 1996 Beast Wars mold redecoed for the 2003 Wal-Mart Dinobots release.

Yet you have given me so many reasons not to use that as a reliable fact. >:oP

My point is that I hope they do not do it, as they reissued not only Cheetus and Dinobot in 2008, but also numerous Hasbro sets in a traditional manner they established in 1985. However, I am not going to rule them out on account that they are usable and may possibly be used as a "UNITED" (or something among those lines) version of Dinoforce.

And if they do... They better add Star Saber into the mix. :michaelbay:

News Credits: 1 · by **Primacron's Little Helper** » Sat Nov 03, 2012 5:46 am

Awesome news about Hardhard - I passed on deluxe Warpath in favour of the legends version, I'm happy about finally get a version of that mold. Not too worried about Reflector as I'm happy with my Perfect Effect team.

News Credits: 241 · by **Jelze Bunnycat** » Sat Nov 03, 2012 7:19 am

KUMA-NIN Maximus wrote:
Sabrblade wrote:Like Jelze said, they resused both Classics Bumblebee and Classics Rodimus, not to mention Classics Megatron, for United.

I'll remember that when I look at the reason why they reissued those figures. But it also does not explain why the list has every Generations/Fall of Cybertron figure being listed as a UNITED figure.

Or did you not mention that on the fanpage I found you tied to?

Oh, and please note that I respect Jelze on account she listens to those who disagrees with her (HINT!)... And know that making said conclusion is a common thing to do. But do not use her as a means of being right. Thanks.

Having a Starscream, Shockwave and Swindle under United does seem puzzling, for these reasons:

- The rest of the Combaticons are plain missing
- Optimus Prime and Jazz are properly listed under TG.
- After checking the ID numbers, they do not match the TG release order: Starscream is TG-09, Swindle is TG-06 (not even the first Combaticon in the list to boot) and Shockwave has yet to get one.

Color me crazy, but I suspect TakaraTomy is planning on restarting the United line again after EX is done, with repaints. They've used WfC molds as Cybertronian forms of G1 characters, and I have a feeling they're planning the same approach for Shockwave. Would be a first to use the same mold for two separate continuities, however I wouldn't rule it out. Remember, the games were never released in Japan.

KUMA-NIN Maximus wrote:
Sabrblade wrote:Doubt it. They haven't used a mold that old for United yet, as that was a 1996 Beast Wars mold redecoed for the 2003 Wal-Mart Dinobots release.

Yet you have given me so many reasons not to use that as a reliable fact. My point is that I hope they do not do it, as they reissued not only Cheetus and Dinobot in 2008, but also numerous Hasbro sets in a traditional manner they established in 1985. However, I am not going to rule them out on account that they are usable and may possibly be used as a "UNITED" (or something among those lines) version of Dinoforce.

And if they do... They better add Star Saber into the mix.

TakaraTomy does have a penchant for using the molds Hasbro has designed on paper how they please. But even they have limits, I'm sure.

by **Rated X** » Sat Nov 03, 2012 8:09 am

I would like to know if Takara Shockwave is the same product as Arms Micron Shockwave. I want the one with the more cartoon accurate G1 deco.

On Hardhead, I might just buy him and use a spare Warpath for an extra head to paint green so he can be Treds. That would look great with Bad Boy and Bugbite.

Reflector - would work, but pointless because the 3rd parties have already done the character in both G1 and neo versions. The mold really needs to be used for Soundwave instead.

News Credits: 10 · by **gavinfuzzy** » Sat Nov 03, 2012 9:11 am

Reflector! I waited 2 years for this moment! And, I still can't find RTS Perceptor.

News Credits: 1 · by **Sodan-1** » Sat Nov 03, 2012 12:54 pm

A green Warpath does not a Hardhead make, and already owning Perfect Effect's SFX I have no desire for a convenient Reflector remold.

Rated X wrote:Reflector - would work, but pointless because the 3rd parties have already done the character in both G1 and neo versions. The mold really needs to be used for Soundwave instead.

Agreed, but I can't see it happening as long as there's a WFC/FoC Soundwave doing the rounds. Apart from the FoC figures voyager size and minion launcher they're conceptually almost the same.

by **Rated X** » Sat Nov 03, 2012 1:06 pm

Sodan-1 wrote:A green Warpath does not a Hardhead make, and already owning Perfect Effect's SFX I have no desire for a convenient Reflector remold.

Agreed. But a green Warpath would make a perfect Treds. And theres no shortage of extra Warpaths to get a head and paint it...

by **NTESHFT** » Sat Nov 03, 2012 1:14 pm

Sodan-1 wrote:A green Warpath does not a Hardhead make, and already owning Perfect Effect's SFX I have no desire for a convenient Reflector remold.

Agree with this, I do..lol......I got the Universe Hardhead with the Headrobots add on, co I'm more than happy with that, even though that particular mold seems like a logical use for him. I have the PE version of Reflector, which I'm more than happy with too. Plus, I honestly feel that Reflector should get his own mold. Shockwave?.....if it's not a repaint of FOC Shockwave, then yes. Grimlocck? If it's a repaint of Classics, that's a negative. I know that repaints of figures are inevitable, but can we get a little less of them?

News Credits: 1 · by **Sodan-1** » Sat Nov 03, 2012 1:26 pm

Rated X wrote:
Sodan-1 wrote:A green Warpath does not a Hardhead make, and already owning Perfect Effect's SFX I have no desire for a convenient Reflector remold.

Agreed. But a green Warpath would make a perfect Treds. And theres no shortage of extra Warpaths to get a head and paint it...

Right you is, but I've no interest in that.

News Credits: 437 · by **Sabrblade** » Sat Nov 03, 2012 1:35 pm

KUMA-NIN Maximus wrote:I'll remember that when I look at the reason why they reissued those figures. But it also does not explain why the list has every Generations/Fall of Cybertron figure being listed as a UNITED figure.

Not all. Optmus and Jazz are still isted under "TG".

KUMA-NIN Maximus wrote:Or did you not mention that on the fanpage I found you tied to?

The what?

KUMA-NIN Maximus wrote:Oh, and please note that I respect Jelze on account she listens to those who disagrees with her (HINT!)... And know that making said conclusion is a common thing to do. But do not use her as a means of being right. Thanks.

I wasn't disagreeing with you, I was giving reassurance based on what we've seen thus far. Though, looking at what Jelze later wrote, now I'm now so sure.

KUMA-NIN Maximus wrote:And if they do... They better add Star Saber into the mix.

Yes, please! :DANCE:

News Credits: 1 · by **KNM2012** » Sat Nov 03, 2012 6:17 pm

JelZe GoldRabbit wrote:Having a Starscream, Shockwave and Swindle under United does seem puzzling, for these reasons:

- The rest of the Combaticons are plain missing
- Optimus Prime and Jazz are properly listed under TG.
- After checking the ID numbers, they do not match the TG release order: Starscream is TG-09, Swindle is TG-06 (not even the first Combaticon in the list to boot) and Shockwave has yet to get one.

Color me crazy, but I suspect TakaraTomy is planning on restarting the United line again after EX is done, with repaints. They've used WfC molds as Cybertronian forms of G1 characters, and I have a feeling they're planning the same approach for Shockwave. Would be a first to use the same mold for two separate continuities, however I wouldn't rule it out. Remember, the games were never released in Japan.

Sorry, I can only color you salmon. They ran out of crazy.

But yeah... Originally, I was thinking that it might be a typo. But now I am thinking that this is not a Japanese listing, but one for their Asian market. Because it would make more sense rebooting the franchise there than them doing two lines that contain the same figures in Japan. Especially since they turned Ultra Magnus into a Chinese market exclusive for that line.

Even then, it doesn't matter. Because I just got back and "read" the second chapter of Transformers: All Spark. Lets just say it is my favorite manga series to date, and lets say that I would not oppose the idea of collecting figures from that series.

JelZe GoldRabbit wrote:TakaraTomy does have a penchant for using the molds Hasbro has designed on paper how they please. But even they have limits, I'm sure.

True. But I cannot rule it out on account that if they do reboot or revive the UNITED line, they would make good Dinoforce figures (especially since they say Kakuryu later became Grimmaster as a means to thank Star Saber).

News Credits: 1 · by **KNM2012** » Sat Nov 03, 2012 6:54 pm

Sabrblade wrote:The what?

Must be your evil clone. Because I came across a site with somebody posting Transformers related news with a name similar or the same as yours. :???:

And even then, I am concluding that UNITED will become an Asian market release. (Also, when I wrote that, my laptop was being a jerk. So some stuff I was writing to another got mixed in with that response. :BOOM:

)

Sabrblade wrote:Yes, please!

Heh. Honestly, on my way to getting the latest issue of Kerokero Ace (BTW, Transformers: All Spark is my favorite manga-based Transformers series now), I was thinking how badly I want Super Ginrai, God Ginrai, Star Saber, Victory Saber, and Dai Atlas. And that once the Super GT version of Star Saber is up for preorder - I will have the same response.

Then again, he is the reason why I am not going to order any more Arms Micron figures anytime soon. :lol: