This page contains affiliate links. We may earn commissions when readers interact with or purchase items through these links. For more information, see our affiliate disclosures here.

The Kitbash/Repaint Resource Thread

Post all your customized Transformers here. Whether it's a small mod or a true kitbash, we'd love to see it!

Re: The Kitbash/Repaint Resource Thread

Postby leakin' lubricant » Sun Jul 27, 2014 8:02 am

Motto: "Be Quick or Be Dead"
Weapon: Dual Laser Cannon
venort wrote:Ahoy there, UK user new to repaints here looking for some advice.

In short: is there an equivalent to Krylon fusion available in england?

So, a little more info. There are no asda stores in travelling distance, so I picked up that asda/wal-mart exclusive bumblebee and strafe pack from ebay. Payment went through, error code, tried again... aaand of course got two confirmation emails. Rather than navigating the ebay/paypal order cancellation/refund minefield, I figured I'd repaint the duplicates (I've got strafe's new deco sorta figured out, haven't decided on Bee's new look yet).

I've been looking through a few tutorials, and krylon fusion is recommended for hasbro plastic. Trouble is, I can't seem to get hold of that over here. Anyone know of an alternative?

Thanks!


Hi, fellow Brit here, I used to use Plastikote for my customs, but found is wasn't durable enough for Transformers, also the clearcoat is prone to yellowing. I have recently changed to Hycote car paints, they cost the same as Plastikote but come in bigger cans, also due to them being car paint there great for colour matching to HasTak plastics. I have replaced the crappy Hasbro paint jobs on Universe Prowl, Ironhide and ROTF Superion with Hycote paints and they look great and are really durable too, hope this helps.
User avatar
leakin' lubricant
Godmaster
Posts: 1722
News Credits: 1
Joined: Fri Jan 18, 2008 4:44 pm
Buy from leakin' lubricant on eBay
Strength: 5
Intelligence: 7
Speed: 5
Endurance: 10
Rank: 3
Courage: 8
Firepower: 7
Skill: 9

Re: The Kitbash/Repaint Resource Thread

Postby leakin' lubricant » Sun Nov 09, 2014 2:25 pm

Motto: "Be Quick or Be Dead"
Weapon: Dual Laser Cannon
Hi I have a question about the ever popular Energon Shockblast into Classics Shockwave custom, what I'm looking to do is take the head apart and paint his lightpiping yellow, however I cant see a way of taking apart the head without damaging it, can anyone who has acheived this offer me some advice, Thanks.
User avatar
leakin' lubricant
Godmaster
Posts: 1722
News Credits: 1
Joined: Fri Jan 18, 2008 4:44 pm
Buy from leakin' lubricant on eBay
Strength: 5
Intelligence: 7
Speed: 5
Endurance: 10
Rank: 3
Courage: 8
Firepower: 7
Skill: 9

Re: The Kitbash/Repaint Resource Thread

Postby Evil Eye » Sun Jan 04, 2015 6:47 am

Motto: "Don't be a goddamn coward."
Weapon: Acid Spray Gun
His head is glued together, but enterprising use of a modelling knife along the joins can split it apart.
Ha ha Transformers go brrrrr
User avatar
Evil Eye
Guardian Of Seibertron
Posts: 5395
News Credits: 12
Joined: Sat Nov 05, 2011 9:24 am
Location: 199X
Alt Mode: F-4 Phantom II
Strength: 7
Intelligence: 8
Speed: 7
Endurance: 8
Rank: 6
Courage: 10
Firepower: 6
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby Stealth Claw » Sat Jul 30, 2016 3:54 pm

Motto: ""I will defend the universe from the tyranny of the decepticons, and the autobot elite guard, and for the honor of the VDMA Brotherhood.""
Weapon: Star Saber Sword
I did make a post on my issue and I don't know where else I can ask, but I'm looking for a video showing how to do the original mp starscream mod that puts the back wing panels on the legs, due to my mp skywarp's brock off...
User avatar
Stealth Claw
Minibot
Posts: 147
Joined: Fri Apr 24, 2009 9:56 am
Location: Ontario, Canada
Watch Stealth Claw on YouTube
Alt Mode: Cybertroian Stealth Jet
Strength: 6
Intelligence: 8
Speed: 9
Endurance: 10
Rank: 9
Courage: 7
Firepower: 5
Skill: Infinity

Re: The Kitbash/Repaint Resource Thread

Postby EchoKing » Thu Apr 13, 2017 9:26 am

Motto: "Men fear what they don't know, and kill what they fear."
Weapon: Dual Laser Beam Rifle
AutobotJazz wrote:OK guys, here's a good place for you guys to throw out brands of paint you like, various tutorials, resource sites, or other tips and tricks you've picked up along the way. We've got a good mix of veterans and interested beginners. Let's share and pool together our strength and resources.


I'm new, how do you spray paint toys? Primer? Sealer?

Also does anyone know where to buy some g1 bumblebee like pistols that are 5mm for most generation figures? :-( (Cartoon pistol)
if you're reading this your a nerd.
User avatar
EchoKing
Mini-Con
Posts: 19
Joined: Wed Apr 12, 2017 9:41 am
Alt Mode: Helicopter
Strength: 3
Speed: 6
Endurance: 4
Rank: 3
Firepower: 3
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby Evil Eye » Thu Apr 13, 2017 10:02 am

Motto: "Don't be a goddamn coward."
Weapon: Acid Spray Gun
EchoKing wrote:
AutobotJazz wrote:OK guys, here's a good place for you guys to throw out brands of paint you like, various tutorials, resource sites, or other tips and tricks you've picked up along the way. We've got a good mix of veterans and interested beginners. Let's share and pool together our strength and resources.


I'm new, how do you spray paint toys? Primer? Sealer?

Also does anyone know where to buy some g1 bumblebee like pistols that are 5mm for most generation figures? :-( (Cartoon pistol)

Oh boy, where to begin?

First you'll want to disassemble your toy, which is a whole other topic. Then be sure to give the parts a good clean (being careful with anything that shouldn't get wet).

Once you have it disassembled and cleaned you'll want to prime it. You can do this either with a spray can or through an airbrush (more on that later). I recommend grey as it's a very neutral colour that most other colours look good over. Mr. Surfacer and Tamiya Primer are both great, if pricey.

Once the primer has dried and cured (which can take anything from a few hours to a few days) you'll want to check for inconsistencies (orange-peeling, graininess etc) and sand them down with progressively finer sandpaper grades.

Now you actually paint your figure. For most things you'll want to airbrush them, as it gives a very smooth and consistent finish. Buying the right airbrush is a whole other topic, but TLDR: Start off with a cheap one for practice (you WILL ruin your first airbrush) before using a decent one like an Iwata once you know how to use it.

Anyway, first you pick your paint. You can use acrylics, enamels or lacquers. Acrylics are usually water-based which means you can thin them with water, and are very easy to use. However the effects aren't usually as good for some things and they aren't very durable. Enamels I've not used much so I can't really comment. Lacquers need to be thinned with very specific thinners and are quite toxic (use in a ventilated space) in addition to being tricky to work with. However they are ridiculously durable and also look beautiful. Don't use them over bare plastic though or it will melt.

Remember, multiple thin coats are always better than one thick coat. Also, THIN YOUR PAINTS. (See above.)

If you want to have a hard barrier between two different colours on the same part you'll need to mask it. This is actually quite simple. First, spray the colour that will make up the majority of the part. Then, once it's dry and cured, use model masking tape (I recommend Tamiya tape) to cover the already painted bits you want to remain the first colour. Then spray the second colour. Once that's dry and cured, remove the masking tape.

Once you've painted everything you'll want to seal/"topcoat" it to protect the paint. You can either use your airbrush to apply bottled/potted varnish (although if you want a shiny finish, Pledge floor polish works well) or alternatively you can get some topcoat varnishes in spraycans.

Once everything is fully dry and cured, put your figure back together (taking great care not to damage the paint). Hooray! It's done!

TIPS:

Remember that parts that come in contact (such as on joints or tabs) will rub paint, so it's best to use more durable paints for these parts. Also be careful of making them too thick with the paint.

If you're just going to keep a figure as a display piece, you can afford to town on it more than if it's going to be handled/transformed. Some paints are very durable, others are quite fragile.

Pratice, practice, PRACTICE. Use plastic spoons to try out airbrushing on. Then try using a knock-off as a "test piece". You don't want to ruin your expensive figure after all.

Always be on the lookout for more information. Books on airbrushing and modelling in general are invaluable. It might be worth joining a modelling forum online for information- Gundam model communities are ideal as Gundam models are quite similar to Transformers in a lot of ways (being brightly coloured robots and all- some even transform!) and a lot of Gundam builders really know their stuff on airbrushing.

Remember that your first custom will inevitably be a mess. So A: don't worry too much when it goes badly wrong, and B: don't use an expensive toy you really like as a base. Get a cheap figure off eBay or your local bargain store.

There's a lot more to it than that, obviously, so be on the lookout for information in other communities.
Ha ha Transformers go brrrrr
User avatar
Evil Eye
Guardian Of Seibertron
Posts: 5395
News Credits: 12
Joined: Sat Nov 05, 2011 9:24 am
Location: 199X
Alt Mode: F-4 Phantom II
Strength: 7
Intelligence: 8
Speed: 7
Endurance: 8
Rank: 6
Courage: 10
Firepower: 6
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby EchoKing » Thu Apr 13, 2017 10:08 am

Motto: "Men fear what they don't know, and kill what they fear."
Weapon: Dual Laser Beam Rifle
Black Hat wrote:
EchoKing wrote:
AutobotJazz wrote:OK guys, here's a good place for you guys to throw out brands of paint you like, various tutorials, resource sites, or other tips and tricks you've picked up along the way. We've got a good mix of veterans and interested beginners. Let's share and pool together our strength and resources.


I'm new, how do you spray paint toys? Primer? Sealer?

Also does anyone know where to buy some g1 bumblebee like pistols that are 5mm for most generation figures? :-( (Cartoon pistol)

Oh boy, where to begin?

First you'll want to disassemble your toy, which is a whole other topic. Then be sure to give the parts a good clean (being careful with anything that shouldn't get wet).

Once you have it disassembled and cleaned you'll want to prime it. You can do this either with a spray can or through an airbrush (more on that later). I recommend grey as it's a very neutral colour that most other colours look good over. Mr. Surfacer and Tamiya Primer are both great, if pricey.

Once the primer has dried and cured (which can take anything from a few hours to a few days) you'll want to check for inconsistencies (orange-peeling, graininess etc) and sand them down with progressively finer sandpaper grades.

Now you actually paint your figure. For most things you'll want to airbrush them, as it gives a very smooth and consistent finish. Buying the right airbrush is a whole other topic, but TLDR: Start off with a cheap one for practice (you WILL ruin your first airbrush) before using a decent one like an Iwata once you know how to use it.

Anyway, first you pick your paint. You can use acrylics, enamels or lacquers. Acrylics are usually water-based which means you can thin them with water, and are very easy to use. However the effects aren't usually as good for some things and they aren't very durable. Enamels I've not used much so I can't really comment. Lacquers need to be thinned with very specific thinners and are quite toxic (use in a ventilated space) in addition to being tricky to work with. However they are ridiculously durable and also look beautiful. Don't use them over bare plastic though or it will melt.

Remember, multiple thin coats are always better than one thick coat. Also, THIN YOUR PAINTS. (See above.)

If you want to have a hard barrier between two different colours on the same part you'll need to mask it. This is actually quite simple. First, spray the colour that will make up the majority of the part. Then, once it's dry and cured, use model masking tape (I recommend Tamiya tape) to cover the already painted bits you want to remain the first colour. Then spray the second colour. Once that's dry and cured, remove the masking tape.

Once you've painted everything you'll want to seal/"topcoat" it to protect the paint. You can either use your airbrush to apply bottled/potted varnish (although if you want a shiny finish, Pledge floor polish works well) or alternatively you can get some topcoat varnishes in spraycans.

Once everything is fully dry and cured, put your figure back together (taking great care not to damage the paint). Hooray! It's done!

TIPS:

Remember that parts that come in contact (such as on joints or tabs) will rub paint, so it's best to use more durable paints for these parts. Also be careful of making them too thick with the paint.

If you're just going to keep a figure as a display piece, you can afford to town on it more than if it's going to be handled/transformed. Some paints are very durable, others are quite fragile.

Pratice, practice, PRACTICE. Use plastic spoons to try out airbrushing on. Then try using a knock-off as a "test piece". You don't want to ruin your expensive figure after all.

Always be on the lookout for more information. Books on airbrushing and modelling in general are invaluable. It might be worth joining a modelling forum online for information- Gundam model communities are ideal as Gundam models are quite similar to Transformers in a lot of ways (being brightly coloured robots and all- some even transform!) and a lot of Gundam builders really know their stuff on airbrushing.

Remember that your first custom will inevitably be a mess. So A: don't worry too much when it goes badly wrong, and B: don't use an expensive toy you really like as a base. Get a cheap figure off eBay or your local bargain store.

There's a lot more to it than that, obviously, so be on the lookout for information in other communities.


Thanks man I appreciate it. :BOWDOWN: would you recommend using a spay on sealer?
if you're reading this your a nerd.
User avatar
EchoKing
Mini-Con
Posts: 19
Joined: Wed Apr 12, 2017 9:41 am
Alt Mode: Helicopter
Strength: 3
Speed: 6
Endurance: 4
Rank: 3
Firepower: 3
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby Evil Eye » Thu Apr 13, 2017 10:19 am

Motto: "Don't be a goddamn coward."
Weapon: Acid Spray Gun
As in, a spray-can? I'd always recommend using an airbrush as it gives you more control, but spray-can varnish (provided it's good stuff) should work just fine.

I should disclose BTW, most of my knowledge is what I've gleaned from other people. I'm not the best airbrusher there ever was- I have the knowledge, I just struggle to apply it. There are far more experienced people out there than me and I recommend you seek them out. Still, I'm glad to have been of help!
Ha ha Transformers go brrrrr
User avatar
Evil Eye
Guardian Of Seibertron
Posts: 5395
News Credits: 12
Joined: Sat Nov 05, 2011 9:24 am
Location: 199X
Alt Mode: F-4 Phantom II
Strength: 7
Intelligence: 8
Speed: 7
Endurance: 8
Rank: 6
Courage: 10
Firepower: 6
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby EchoKing » Thu Apr 13, 2017 10:27 am

Motto: "Men fear what they don't know, and kill what they fear."
Weapon: Dual Laser Beam Rifle
Black Hat wrote:As in, a spray-can? I'd always recommend using an airbrush as it gives you more control, but spray-can varnish (provided it's good stuff) should work just fine.

I should disclose BTW, most of my knowledge is what I've gleaned from other people. I'm not the best airbrusher there ever was- I have the knowledge, I just struggle to apply it. There are far more experienced people out there than me and I recommend you seek them out. Still, I'm glad to have been of help!


Is airbrushing the technique that :HASBRO: use for their toys?
if you're reading this your a nerd.
User avatar
EchoKing
Mini-Con
Posts: 19
Joined: Wed Apr 12, 2017 9:41 am
Alt Mode: Helicopter
Strength: 3
Speed: 6
Endurance: 4
Rank: 3
Firepower: 3
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby Evil Eye » Thu Apr 13, 2017 10:38 am

Motto: "Don't be a goddamn coward."
Weapon: Acid Spray Gun
Hasbro usually uses factory-grade spraying machines using paints that are not commercially available. Though for some elements I'm pretty sure they are hand-sprayed using an airbrush (though again, using factory-grade paint).
Ha ha Transformers go brrrrr
User avatar
Evil Eye
Guardian Of Seibertron
Posts: 5395
News Credits: 12
Joined: Sat Nov 05, 2011 9:24 am
Location: 199X
Alt Mode: F-4 Phantom II
Strength: 7
Intelligence: 8
Speed: 7
Endurance: 8
Rank: 6
Courage: 10
Firepower: 6
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby Decepticon Stryker » Wed Nov 01, 2017 10:45 am

Motto: "Peace through Tyranny, Tyranny through Strength, Strength through Stealth"
Weapon: Null-Ray Rifle
I have kind of an odd question given its specifics: what kind of paint works well with Titans Return Deluxes?
I have a blog now. Check it out:
http://www.hydrogenham.blogspot.com

Image
User avatar
Decepticon Stryker
Headmaster
Posts: 1047
News Credits: 3
Joined: Sat May 21, 2016 3:52 pm
Alt Mode: Cybertronian Jet and Pickup car
Strength: 7
Intelligence: 9
Speed: 9
Endurance: 8
Rank: 6
Courage: 7
Firepower: 9
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby The_Cryptid_Person » Thu Jun 28, 2018 12:27 am

How do you all feel about Tamiya Spray Lacquers? I was considering using them for basecoats or re-coloring large areas, but being both spray paints AND lacquers I fear they could melt the plastic. If anyone has experience with them, it would help greatly.
Rushing in where Hasbro fears to tread (for now)...
Image
Check my Twitter for customs and digibashes! || My ongoing Transtopia thread
User avatar
The_Cryptid_Person
Vehicon
Posts: 388
News Credits: 1
Joined: Thu Nov 09, 2017 9:28 am

Re: The Kitbash/Repaint Resource Thread

Postby Evil Eye » Thu Jun 28, 2018 10:50 am

Motto: "Don't be a goddamn coward."
Weapon: Acid Spray Gun
They SHOULD be fine, and being lacquers they'll be nicely hard wearing. I don't like spraycans (not enough control over the "flow") but if you do they're a good bet. Test it out first though.
Ha ha Transformers go brrrrr
User avatar
Evil Eye
Guardian Of Seibertron
Posts: 5395
News Credits: 12
Joined: Sat Nov 05, 2011 9:24 am
Location: 199X
Alt Mode: F-4 Phantom II
Strength: 7
Intelligence: 8
Speed: 7
Endurance: 8
Rank: 6
Courage: 10
Firepower: 6
Skill: 8

Re: The Kitbash/Repaint Resource Thread

Postby Stormtalon » Tue Feb 05, 2019 4:08 pm


Hello, I hope this is the right place to ask this question. So I got an extra Combiner Wars Firefly and I wanted to repaint it into Slingshot but I've never repainted a Transformer and can use all the help I can get.

I have an extra Firefly and the jet version of Blast Off (Lift Off). I wanted to switch heads. Lift-Off's head repainted into Slingshot and Firefly's visored head into Blast Off colors. And I wanted to repaint Firefly into Slingshot.

Has anyone had any luck redecoing Combiner Wars figures?

Stormtalon
Minibot
Posts: 109
Joined: Wed Feb 19, 2014 10:15 pm

Re: The Kitbash/Repaint Resource Thread

Postby Emperor Omega » Wed Feb 20, 2019 1:12 pm

Stormtalon wrote:Has anyone had any luck redecoing Combiner Wars figures?


Image

I think I did an OK job with CW Optimus.

I mainly stuck with Acrylic paints.

The only downside I had with Acrylics, is that it's hard to clean off your brushes.

Speaking of repaints, I recently (Like, within the last 24 hours) bought the TFP RID Voyager Optimus Prime from eBay.

I'm looking to paint over the clear blue plastic on his arms. Also, touch up the chest section around his windscreens.

Does anyone know which shade of red would match up with him? I mainly use Humbrol or Revell paints.
User avatar
Emperor Omega
Mini-Con
Posts: 4
Joined: Wed Feb 20, 2019 12:42 pm

Re: The Kitbash/Repaint Resource Thread

Postby Lunatic Prime » Mon Apr 29, 2019 5:03 am

Motto: "For 'cons I'm annoying like a swarm of Scraplets."
Weapon: Cyber Tail Claw
My customs thread [click image]:
Image
Check out my DEVIANT ART and Twitter, too ;)

Likes:
new stuff (designs, innovation, character interpretations and evolution), bots with more or less than four limbs, non-humanoid robot modes

Dislikes:
sticking to outdated stuff, ignorance, stubbornness

And I am not a completionist. I buy what I judge being cool to me.
User avatar
Lunatic Prime
Headmaster
Posts: 1171
News Credits: 3
Joined: Tue Dec 08, 2015 12:53 pm
Location: Animatron
Watch Lunatic Prime on YouTube
Buy from Lunatic Prime on eBay
Alt Mode: Triplechanger - dragon and giant monowheel
Strength: 8
Intelligence: 9
Speed: 8
Endurance: 8
Rank: Infinity
Courage: 10
Firepower: 7
Skill: 10+

Re: The Kitbash/Repaint Resource Thread

Postby The_Cryptid_Person » Fri May 10, 2019 6:37 am

C20277C7-D68A-402F-8D1A-D3033F3F1E42.jpeg
C20277C7-D68A-402F-8D1A-D3033F3F1E42.jpeg (36.6 KiB) Viewed 204990 times

Thinking about a nominus Prime custom... maybe Nitro Zeus could be a good base. I’d prefer an aligned aesthetic to a movie one, but RiD Warrior Prime and FoC Shockwave/air raid are too small. PRiD Skyquake is too pricey. Anyone have better ideas looking at this?
Rushing in where Hasbro fears to tread (for now)...
Image
Check my Twitter for customs and digibashes! || My ongoing Transtopia thread
User avatar
The_Cryptid_Person
Vehicon
Posts: 388
News Credits: 1
Joined: Thu Nov 09, 2017 9:28 am

Re: The Kitbash/Repaint Resource Thread

Postby Lunatic Prime » Fri May 10, 2019 8:09 am

Motto: "For 'cons I'm annoying like a swarm of Scraplets."
Weapon: Cyber Tail Claw
Latebrus-K wrote:Image
Thinking about a nominus Prime custom... maybe Nitro Zeus could be a good base. I’d prefer an aligned aesthetic to a movie one, but RiD Warrior Prime and FoC Shockwave/air raid are too small. PRiD Skyquake is too pricey. Anyone have better ideas looking at this?

Maybe Cybertron Starscream
Image

or Armada Starscream
Image
Image

or TFP BH Dreadwing
Image


Cybertron Starscream's nosecone would work perfect for Nominus Prime's nosecone and feet. As well as the transformation of the legs.
Armada Starscream's thrusters/cannons would work perfect for Nominus'es and just look at their shins.
And TFP BH Dreadwing would be a pretty interesting choice. Just attach the big cannon's ontop of his wings and the transformation of the shoulders fits pretty nicely, I think. Just attach those golden spikes that form the tip of Nominus'es jet mode.
But Nitro Zeus is still a very good choice and with the right head and some other added parts could fit into the aligned continuity ;)^
My customs thread [click image]:
Image
Check out my DEVIANT ART and Twitter, too ;)

Likes:
new stuff (designs, innovation, character interpretations and evolution), bots with more or less than four limbs, non-humanoid robot modes

Dislikes:
sticking to outdated stuff, ignorance, stubbornness

And I am not a completionist. I buy what I judge being cool to me.
User avatar
Lunatic Prime
Headmaster
Posts: 1171
News Credits: 3
Joined: Tue Dec 08, 2015 12:53 pm
Location: Animatron
Watch Lunatic Prime on YouTube
Buy from Lunatic Prime on eBay
Alt Mode: Triplechanger - dragon and giant monowheel
Strength: 8
Intelligence: 9
Speed: 8
Endurance: 8
Rank: Infinity
Courage: 10
Firepower: 7
Skill: 10+

Re: The Kitbash/Repaint Resource Thread

Postby ZeldaTheSwordsman » Thu Jul 04, 2019 4:58 pm

Motto: "Earthrise restock or riot"
Anybody got high-res images of Leobreaker's prototype? How about a scan of Beast Wars Universe Page 50?
WANT:
* Cybertron Galvatron key, missiles
* Omega Lock
* Primus Cyber Key, coattail panel
* Powerlinx Comettor
* Cyb Jetfire R gun and missile
* RiD Galvy dragon head, beast arms
* DotM Ironhide windshield, R hood assy.
* ROTF Jetfire R JTFR panel

Di Bonaventura is not a credible or trustworthy source. And most fans do like the diversity push, thanks.

Trading MOSC MMPR fliphead Pink Ranger for ER Fasttrack or SIEGE Refraktor
User avatar
ZeldaTheSwordsman
Guardian Of Seibertron
Posts: 5258
Joined: Mon Dec 19, 2005 5:07 am

Re: The Kitbash/Repaint Resource Thread

Postby Lunatic Prime » Tue Jul 23, 2019 10:58 am

Motto: "For 'cons I'm annoying like a swarm of Scraplets."
Weapon: Cyber Tail Claw
Lunatic Prime wrote:
ZeldaTheSwordsman wrote:
Lunatic Prime wrote:
ZeldaTheSwordsman wrote:
Lunatic Prime wrote:And can anyone recommend a good choice of a head for a (Deluxe class) THE FALLEN custom?

ImageImage

Now I'm actually thinking about using Shuffler :-?

Image

Deluxe Optimus Prime. Snip the antennae, build up the lower crest, score the mouthplate.

"score"? I'm not a native in English, sorry. I guess you mean carving in grooves. Yea, that's what I'm a bit affraid of. Do you know a good technique?

I've already been looking a bit and found HIM a couple of minutes ago:

Image

I'd remove his halo and paint the head - that's it.

Image

But he might be a bit small for the body I intend to use...

Image
Size comparison between Deluxe and Legends Warpath:
Image

But as you mention Optimus I have a figure I intended to keep for custom parts anyway :D

Image

AND it'd save me 10 euros.

Use a steel ruler (or failing that, some other sufficiently solid straight piece of metal) as a guide. Use the tip of the knife, and go lightly, deepening the grooves through repeated passes.

Thanks for the advice. I was already thinking of using a blade instead of my small drilling machine with a grinding head but I guess with small heads like those the grooves made by a knife will be wide enough.

Hi folks,
I already had a little dicussion with two nice members of this forum about but do you have any other suggestions that didn't come to our minds?

I also found this one but I prefer complete heads:
Image
My customs thread [click image]:
Image
Check out my DEVIANT ART and Twitter, too ;)

Likes:
new stuff (designs, innovation, character interpretations and evolution), bots with more or less than four limbs, non-humanoid robot modes

Dislikes:
sticking to outdated stuff, ignorance, stubbornness

And I am not a completionist. I buy what I judge being cool to me.
User avatar
Lunatic Prime
Headmaster
Posts: 1171
News Credits: 3
Joined: Tue Dec 08, 2015 12:53 pm
Location: Animatron
Watch Lunatic Prime on YouTube
Buy from Lunatic Prime on eBay
Alt Mode: Triplechanger - dragon and giant monowheel
Strength: 8
Intelligence: 9
Speed: 8
Endurance: 8
Rank: Infinity
Courage: 10
Firepower: 7
Skill: 10+

Re: The Kitbash/Repaint Resource Thread

Postby The_Cryptid_Person » Tue Jul 23, 2019 12:27 pm

I think a few versions of Wheeljack's head might work, such as the Alternators or Construct-bots ones, if you remove the ears. Cyberverse Grimlock has some good potential too, with his textured mouthplate. Combiner Wars fireflight or Brawl are also decent matches and have been OSKO'd on eBay. If I recall correctly, that Overload figure is about voyager size, which would make any official Warpath's head way too small, bar an OSKO of some kind?
Or: an Energon Mirage head with the crest cut down. The figure isn't uncommon at toy conventions and the like, often sold for parts.
It might not look good on an RiD body, but Bumblebee Movie Blitzwing's head could generally work. The larger one is rare, though, and the others may be too small.
Rushing in where Hasbro fears to tread (for now)...
Image
Check my Twitter for customs and digibashes! || My ongoing Transtopia thread
User avatar
The_Cryptid_Person
Vehicon
Posts: 388
News Credits: 1
Joined: Thu Nov 09, 2017 9:28 am

Re: The Kitbash/Repaint Resource Thread

Postby Lunatic Prime » Tue Jul 23, 2019 1:04 pm

Motto: "For 'cons I'm annoying like a swarm of Scraplets."
Weapon: Cyber Tail Claw
Latebrus-K wrote:I think a few versions of Wheeljack's head might work, such as the Alternators or Construct-bots ones, if you remove the ears. Cyberverse Grimlock has some good potential too, with his textured mouthplate. Combiner Wars fireflight or Brawl are also decent matches and have been OSKO'd on eBay. If I recall correctly, that Overload figure is about voyager size, which would make any official Warpath's head way too small, bar an OSKO of some kind?
Or: an Energon Mirage head with the crest cut down. The figure isn't uncommon at toy conventions and the like, often sold for parts.
It might not look good on an RiD body, but Bumblebee Movie Blitzwing's head could generally work. The larger one is rare, though, and the others may be too small.

Sizewise Overload is a Deluxe class figure. So no big heads. But CW Brawl sounds pretty well matching. Especially the size. I'm just not sure if I should turn my G2 Brawl or Nosecone into a headless bot. I might turn Nosecone into a Headmaster as I gave him CounterPunch's Prime armor anyway but any Titan Master will definitly not scale with him.
My customs thread [click image]:
Image
Check out my DEVIANT ART and Twitter, too ;)

Likes:
new stuff (designs, innovation, character interpretations and evolution), bots with more or less than four limbs, non-humanoid robot modes

Dislikes:
sticking to outdated stuff, ignorance, stubbornness

And I am not a completionist. I buy what I judge being cool to me.
User avatar
Lunatic Prime
Headmaster
Posts: 1171
News Credits: 3
Joined: Tue Dec 08, 2015 12:53 pm
Location: Animatron
Watch Lunatic Prime on YouTube
Buy from Lunatic Prime on eBay
Alt Mode: Triplechanger - dragon and giant monowheel
Strength: 8
Intelligence: 9
Speed: 8
Endurance: 8
Rank: Infinity
Courage: 10
Firepower: 7
Skill: 10+

Re: The Kitbash/Repaint Resource Thread

Postby The_Cryptid_Person » Tue Jul 23, 2019 1:15 pm

Lunatic Prime wrote:Sizewise Overload is a Deluxe class figure. So no big heads. But CW Brawl sounds pretty well matching. Especially the size. I'm just not sure if I should turn my G2 Brawl or Nosecone into a headless bot. I might turn Nosecone into a Headmaster as I gave him CounterPunch's Prime armor anyway but any Titan Master will definitly not scale with him.

Fascinating. Sorry I missed that bit, but there are definitely 1:1 KOs of Brawl (and fireflight) on eBay if you don't feel like decapitating anybody.

Anyone have good recommendations for a CW Rotorstorm head? Thinking about RiD Stormshot, but willing to try other options. Currently, I have a headless, blue Alpha Bravo with big arms.
Rushing in where Hasbro fears to tread (for now)...
Image
Check my Twitter for customs and digibashes! || My ongoing Transtopia thread
User avatar
The_Cryptid_Person
Vehicon
Posts: 388
News Credits: 1
Joined: Thu Nov 09, 2017 9:28 am

Re: The Kitbash/Repaint Resource Thread

Postby Lunatic Prime » Tue Jul 23, 2019 1:49 pm

Motto: "For 'cons I'm annoying like a swarm of Scraplets."
Weapon: Cyber Tail Claw
Latebrus-K wrote:
Lunatic Prime wrote:Sizewise Overload is a Deluxe class figure. So no big heads. But CW Brawl sounds pretty well matching. Especially the size. I'm just not sure if I should turn my G2 Brawl or Nosecone into a headless bot. I might turn Nosecone into a Headmaster as I gave him CounterPunch's Prime armor anyway but any Titan Master will definitly not scale with him.

Fascinating. Sorry I missed that bit, but there are definitely 1:1 KOs of Brawl (and fireflight) on eBay if you don't feel like decapitating anybody.

Anyone have good recommendations for a CW Rotorstorm head? Thinking about RiD Stormshot, but willing to try other options. Currently, I have a headless, blue Alpha Bravo with big arms.

What does OSKO mean?

Maybe CW Quickslinger/Blast Off:
Image

OR
HftD Tomahawk:
Image
My customs thread [click image]:
Image
Check out my DEVIANT ART and Twitter, too ;)

Likes:
new stuff (designs, innovation, character interpretations and evolution), bots with more or less than four limbs, non-humanoid robot modes

Dislikes:
sticking to outdated stuff, ignorance, stubbornness

And I am not a completionist. I buy what I judge being cool to me.
User avatar
Lunatic Prime
Headmaster
Posts: 1171
News Credits: 3
Joined: Tue Dec 08, 2015 12:53 pm
Location: Animatron
Watch Lunatic Prime on YouTube
Buy from Lunatic Prime on eBay
Alt Mode: Triplechanger - dragon and giant monowheel
Strength: 8
Intelligence: 9
Speed: 8
Endurance: 8
Rank: Infinity
Courage: 10
Firepower: 7
Skill: 10+

Re: The Kitbash/Repaint Resource Thread

Postby Lunatic Prime » Tue Jul 23, 2019 1:55 pm

Motto: "For 'cons I'm annoying like a swarm of Scraplets."
Weapon: Cyber Tail Claw
Or with a bit different aesthetic this mold (click picture):

Image
My customs thread [click image]:
Image
Check out my DEVIANT ART and Twitter, too ;)

Likes:
new stuff (designs, innovation, character interpretations and evolution), bots with more or less than four limbs, non-humanoid robot modes

Dislikes:
sticking to outdated stuff, ignorance, stubbornness

And I am not a completionist. I buy what I judge being cool to me.
User avatar
Lunatic Prime
Headmaster
Posts: 1171
News Credits: 3
Joined: Tue Dec 08, 2015 12:53 pm
Location: Animatron
Watch Lunatic Prime on YouTube
Buy from Lunatic Prime on eBay
Alt Mode: Triplechanger - dragon and giant monowheel
Strength: 8
Intelligence: 9
Speed: 8
Endurance: 8
Rank: Infinity
Courage: 10
Firepower: 7
Skill: 10+

PreviousNext

Return to Customizations

Transformers and More @ The Seibertron Store

Visit our store on eBay
These are affiliate links. We may earn commissions when you purchase items or services through these links.
Visit shop.seibertron.com to buy "WFC-K33 SLAMMER Transformers War for Cybertron Kingdom Deluxe Hasbro 2022 New"
NEW!
WFC-K33 SLAMMER Tr ...
Visit shop.seibertron.com to buy "WFC-K27 RHINOX Transformers War Cybertron Kingdom Voyager Hasbro 2021 New"
WFC-K27 RHINOX Tra ...
Visit shop.seibertron.com to buy "WFC-K7 PALEOTREX Transformers War Cybertron Kingdom Deluxe Hasbro 2020 New"
WFC-K7 PALEOTREX T ...
Visit shop.seibertron.com to buy "WFC-K43 HOT ROD Transformers War for Cybertron Kingdom Core 2022 New 220329"
WFC-K43 HOT ROD Tr ...
Visit shop.seibertron.com to buy "KUP Transformers Buzzworthy Bumblebee Studio Series 86-02 Hasbro 2022 New"
KUP Transformers B ...
Visit shop.seibertron.com to buy "BWVS-02 RHINOX + SCORPONOK Transformers Beast Wars Again Kingdom Hasbro 2023 New"
BWVS-02 RHINOX + S ...
Visit shop.seibertron.com to buy "WFC-K10 MEGATRON Transformers War Cybertron Kingdom Leader Beast Wars 2021 New"
WFC-K10 MEGATRON T ...
Visit shop.seibertron.com to buy "WFC-K32 PIPES Transformers War for Cybertron Kingdom Deluxe Hasbro 2022 New"
WFC-K32 PIPES Tran ...
Visit shop.seibertron.com to buy "WFC-K31 SHADOW PANTHER Transformers War Cybertron Kingdom Deluxe 2021 New"
WFC-K31 SHADOW PAN ...
Visit shop.seibertron.com to buy "WFC-K14 AIRAZOR Transformers War for Cybertron Kingdom Deluxe Hasbro 2021 New"
WFC-K14 AIRAZOR Tr ...
Visit shop.seibertron.com to buy "BWVS-01 OPTIMUS PRIMAL + MEGATRON Transformers Beast Wars Again Kingdom 2023 New"
BWVS-01 OPTIMUS PR ...
Visit shop.seibertron.com to buy "WFC-K2 RATTRAP Transformers War for Cybertron Kingdom Core Hasbro 2020 New"
WFC-K2 RATTRAP Tra ...
Visit shop.seibertron.com to buy "BWVS-03 CHEETOR + WASPINATOR Transformers Beast Wars Again Kingdom Hasbro 2024"
BWVS-03 CHEETOR + ...
Visit shop.seibertron.com to buy "CORONATION STARSCREAM Transformers Studio Series 86-12 Leader 2022 King 220907A"
CORONATION STARSCR ...
* Price and quantities subject to change. Shipping costs, taxes and other fees not included in cost shown. Refer to listing for current price and availability.
Find the items above and thousands more at the Seibertron Store on eBay
Transformers Podcast: Twincast / Podcast #346 - Gas Station Jamboree
Twincast / Podcast #346:
"Gas Station Jamboree"
MP3 · iTunes · RSS · View · Discuss · Ask
Posted: Saturday, March 23rd, 2024

Featured Products on Amazon.com

These are affiliate links. We may earn commissions when you purchase items or services through these links.
Buy "Transformers: Generations Power of The Primes Legends Class Roadtrap" on AMAZON
Buy "Transformers Toys Optimus Prime Cyberverse Ultimate Class Action Figure - Repeatable Matrix Mega Shot Action Attack Move - Toys for Kids 6 & Up, 11.5"" on AMAZON
Buy "Transformers Authentics Grimlock Action Figure" on AMAZON
Buy "Transformers Generations Titans Return Deluxe Misfire and Aimless" on AMAZON
Buy "Transformers Studio Series 13 Voyager Class Movie 2 Megatron" on AMAZON
Buy "Transformers Studio Series 10 Deluxe Class Movie 1 Autobot Jazz" on AMAZON
Buy "Transformers: Bumblebee -- Energon Igniters Nitro Series Optimus Prime" on AMAZON
Buy "Transformers Deluxe Stryker 1 Action Figure" on AMAZON
Buy "Transformers RID Combiner Force Warriors Class Starscream" on AMAZON
Buy "Transformers Generations Titans Return Darkmoon and Astrotrain" on AMAZON
Buy "Transformers Generations Titans Return Titan Master Vorath and Mindwipe" on AMAZON
Buy "Transformers Generations Titans Return Roadburn" on AMAZON