Page 10 of 57

Re: The Official Part(s) Identification Topic

PostPosted: Mon Aug 22, 2011 1:56 pm
by Jelze Bunnycat
AdamPrime wrote:The white one is Primes, and the blue one is Energon Hot Shot's, missing the grip.


Actually, it's Energon Prowl's. Hot Shot's is orange on both versions.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 23, 2011 6:56 am
by Marcdachamp
Okay, here's one for you guys. It's a grey piece with two circular orange pegs on each side. It kind of looks like a belt. I thought it belonged to Energon Rodimus, but I'm not so sure anymore.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 23, 2011 7:36 am
by Jelze Bunnycat
Got pics my good man?

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 23, 2011 7:43 am
by Marcdachamp
JelZe GoldRabbit wrote:Got pics my good man?


I don't actually. I'm at work and I'm not sure how to post pics. I'm almost POSITIVE it's Unicron Trilogy era. I swore it belonged to Rodimus, but now I don't see where it would fit. I'm pretty sure that it goes in front of a vehicle mode and then becomes almost a belt in robot mode. The gray part is fairly flat, with small, circular orange pegs on each side.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 23, 2011 10:48 am
by Overcracker
To post pics, use an image sharing site such as imageshack or photobucket, and then paste the link here, surrounded by
Code: Select all
[img]http://www.site.com/path/to/image.jpg[/img]
tags.

Alternatively you can use the attachment form below the post box to upload a pic directly to seibetron.com

Anyway, by your description, I'd be willing to say it belongs to Robots in Disguise Wedge from the Build team. Its his gun / Landfill's waist piece.

Check it out here:

http://www.tfu.info/2001/Autobot/Wedge/wedge.htm

If its not that, then yes a pic would be great.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 23, 2011 11:21 am
by Marcdachamp
Overcracker wrote:To post pics, use an image sharing site such as imageshack or photobucket, and then paste the link here, surrounded by
Code: Select all
[img]http://www.site.com/path/to/image.jpg[/img]
tags.

Alternatively you can use the attachment form below the post box to upload a pic directly to seibetron.com

Anyway, by your description, I'd be willing to say it belongs to Robots in Disguise Wedge from the Build team. Its his gun / Landfill's waist piece.

Check it out here:

http://www.tfu.info/2001/Autobot/Wedge/wedge.htm

If its not that, then yes a pic would be great.


That's the one!! Dude, thank you so much! I don't know why, but I swore it belonged to Rodimus, despite every single thing I found online.

I gave away my RiD build team years ago. Must have forgot to include this. Oh well. :lol:

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 23, 2011 12:54 pm
by Overcracker
No, prob. :-B

Buyt really you gave away Landfill? :twisted: :twisted:
He's the most unique combiner out there. I truly consider him one of my favorite pieces. He' just awesome.

Re: The Official Part(s) Identification Topic

PostPosted: Thu Aug 25, 2011 8:05 am
by Marcdachamp
Overcracker wrote:No, prob. :-B

Buyt really you gave away Landfill? :twisted: :twisted:
He's the most unique combiner out there. I truly consider him one of my favorite pieces. He' just awesome.


Yeah, a few years ago. My Mom's friend's son was just getting into TFs and I needed to clear out some space. There are a few that I've regretted getting rid of, but Landfill wasn't one that really stuck out to me. I thought he was kind of a pain in the neck to combine.

Re: The Official Part(s) Identification Topic

PostPosted: Thu Aug 25, 2011 5:35 pm
by Evil_the_Nub
Marcdachamp wrote:
Overcracker wrote:No, prob. :-B

Buyt really you gave away Landfill? :twisted: :twisted:
He's the most unique combiner out there. I truly consider him one of my favorite pieces. He' just awesome.


Yeah, a few years ago. My Mom's friend's son was just getting into TFs and I needed to clear out some space. There are a few that I've regretted getting rid of, but Landfill wasn't one that really stuck out to me. I thought he was kind of a pain in the neck to combine.

I always thought Landfill was overrated too. He never stays together well and he's too cumbersome.

Re: The Official Part(s) Identification Topic

PostPosted: Thu Aug 25, 2011 8:07 pm
by -Kanrabat-
I bought a couple of random TF and Go-Bots for only 15$ plus 10$ shipping. I'll need help identifying some of them.

This one look like Demolishor, without his missiles and minicon. But he's the red one. That repaint have a special name?
Image

This one look like a Go-Bots. Marked MRT-41 Bandai 1984Q JAPAN.
Image

This poor fellow seem to have no legs... mrked 2006 LFL Hasbro C-023E
Image

Some random parts. They look like a right and left ones. No clues.
Image

Go-Bots Leader One in a horibble condition.
Image

Defenitely a Minico, but he seem to miss some parts.
Image

This one wear proudly a :CON: on his hood. He seem complete. Kinda look like a miniucon, but since when does minicons have faction symbols on them?
Image

Look like the previous guy's little brother. He miss an arm.
Image

A random gun.
Image

This one is in perfect condition. Would he be by some miracle, one of Doubledealer's engine?
Image

It would be awesome if you could help me!

Re: The Official Part(s) Identification Topic

PostPosted: Thu Aug 25, 2011 9:52 pm
by Evil_the_Nub
The 4th one goes to the Superhuman Samurai Syber-Squad figure Xenon. That last picture is one of Doubledealer's engines, the other is a purple bat.

Re: The Official Part(s) Identification Topic

PostPosted: Thu Aug 25, 2011 11:36 pm
by Overcracker
1. He's Powerlinx Demolishor

2. Bandai's Machine Robo Scratch http://www.collectiondx.com/review/tran ... oy/scratch

3. Star Wars Crossovers Clone Pilot/ Republic Gunship

4. ...

5. Yup, Regular Guardian Leader 1

6. Armada Minicon Terradive (missing the front of the jet)

7. Cybertron Minicon Payload

8. G1 Micromaster Oiler (minus his Tanker section)

9. Large Gun

10. Actually its even rarer than that, its Doubledealer's repaint Doubleclouder's Engine: Clouder, from the Godmasters line.

Re: The Official Part(s) Identification Topic

PostPosted: Fri Aug 26, 2011 1:52 am
by AdamPrime
Clouder? I never knew he was painted differently. How so? Unless my memory is deteriorating, he looks the same as Knok. Is it just the shade of red or something?

Re: The Official Part(s) Identification Topic

PostPosted: Fri Aug 26, 2011 2:12 am
by AdamPrime
Ah, after a quick bit of research, it seems that Clouder is very pale grey- possibly white.
I don't wanna be a jerk, Overcracker, but are you sure that's Clouder and not Knok? The shade of grey seems pretty consistent with my own- I think the flash is just making the plastic appear much lighter.

That would be a heck of a find, though, wouldn't it? I've never seen a Doubleclouder before, or even his accessories. Quite different to our own Doubledealer...

Re: The Official Part(s) Identification Topic

PostPosted: Fri Aug 26, 2011 3:50 am
by -Kanrabat-
Thanks a bunch, guys! By the way, the engine MUST be Knock. The engine is chrome and baby-blue, while his arms and legs are firetruck-red.

If you look a few posts back, you see that I mistakinly bought a Doubledealer without any accessories. And here I am, having one of his engines unexpectedly falling into my hands! :D

Re: The Official Part(s) Identification Topic

PostPosted: Fri Aug 26, 2011 10:39 am
by Overcracker
Image Its possible its Knok.

However from my experience, my DD is in storage right now so can't actually go and confirm this, Knok's gray is much darker, as well as the blue face and chest being almost navy blue.

While Clouder has a very bright blue for the face and chest, and very light gray body just like this is coming across.

I question the engine being chromed? Neither partner has chrome on him as far as I know. However the Doubleclouder version does come with a chromed chest piece rather than the blue one Doubledealer has.
http://www.tfu.info/1988/Cybertron/Doub ... louder.htm

Though I can admit it may be the flash playing tricks. Though isn't it much cooler to think you got a very rare Clouder he he :grin:

Re: The Official Part(s) Identification Topic

PostPosted: Fri Aug 26, 2011 4:31 pm
by -Kanrabat-
Overcracker wrote:Knock or Clouder?


Knock. Defenitely. I derped, and he don't have chrome. I saw a bootleg version of Doubleclouder named "Doubledealer" on Ebay and this one had all the colors you mentioned. The Knok-Off is a different color than mine entirely.

See the "missile Truck" at http://www.ebay.ca/itm/TRANSFORMERS-G1- ... 3a68db7dda

I saw the picture you refered and I'm at a loss... It's not like the knock-off at all. Are you sure that DoubleClouder is not with Knock instead of Clouder?

Re: The Official Part(s) Identification Topic

PostPosted: Sat Aug 27, 2011 10:58 am
by Jelze Bunnycat
Knok and (Autobot) Clouder both have red limbs, but Clouder is a paler grey, bordering white. To solve the name issue while making it more confusing at the same time, both engines are called Clouder in Japan: in the cartoon he can switch between either form.

Here's a handy page:

DoubleClouder on TFU.info

Surprisingly, he uses Doubledealer's colors in the cartoon:

Doubledealer on TFU.info

And I have him, so I oughta know ;)

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 30, 2011 9:00 am
by Marcdachamp
Overcracker wrote:9. Large Gun


That looks like Swindle's gun, to me.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 30, 2011 10:00 am
by Jelze Bunnycat
Marcdachamp wrote:
Overcracker wrote:9. Large Gun


That looks like Swindle's gun, to me.


Good call, it is G1 Swindle's larger gun.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 30, 2011 10:59 am
by Overcracker
Yeah!, that is Swindle's gun. I guess it just didn't click the first time. Black guns they are all the same ha ha ha :grin:

Good call.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Aug 30, 2011 3:47 pm
by -Kanrabat-
Transformers G1 Combaticon Swindle large gun

Thanks for identifying guys! :D
By the way, I put it for sale on Ebay. Here's the listing:

http://www.ebay.ca/itm/160645262350?ssP ... 1555.l2649

Call this a kind of revenge.
:twisted:

Re: The Official Part(s) Identification Topic

PostPosted: Sat Sep 03, 2011 11:34 am
by Erailea
[Edit: disregard this post. I found it after quite a bit more searching... almost pee'd myself too when I did xD Talk about awesome finds. Spent virtually nothing and got a functioning Ultimate figure. Lol]


I found Bee at a flee market today and need help figuring out which movie he's from and if he's Leader or Ultimate (or something else I'm not aware of). He's too figgin' difficult to transform without help and not knowing where he's from or what class he is makes finding it difficult.

Two pics are below. Not the greatest pictures but he was hard to photograph since he's poorly transformed (hey, I tried xP) and won't stand up properly. Dunno if it'll help, but the doors are attached with a hose and the windows are *not* transparent and the autobot insignia is a button.


Image
Image

Any and all help would be appreciated.

Re: The Official Part(s) Identification Topic

PostPosted: Sat Sep 03, 2011 2:55 pm
by Overcracker
Ultimate Bumblebee from the 2007 Movie.

The differences with Battle Charged BB from the 2009 movie are merely cosmetic. The front bumper and fog lamps were altered to match the body kit of the movie model.

Re: The Official Part(s) Identification Topic

PostPosted: Sun Sep 04, 2011 5:06 am
by Jelze Bunnycat
Overcracker wrote:Ultimate Bumblebee from the 2007 Movie.

The differences with Battle Charged BB from the 2009 movie are merely cosmetic. The front bumper and fog lamps were altered to match the body kit of the movie model.


Man you're good :shock: I couldn't tell, despite my knowledge of the differences.