This page contains affiliate links. We may earn commissions when readers interact with or purchase items through these links. For more information, see our affiliate disclosures here.

Tips and tricks

Post all your customized Transformers here. Whether it's a small mod or a true kitbash, we'd love to see it!

Re: Tips and tricks

Postby Rhinox23 » Mon Feb 18, 2013 10:01 pm

Hey guys. I'm planning on starting my first customization here soon...TFP Beast Hunters Starscream into Beast Wars Terrosaur! I've read all of the posts in this thread and have a great point to start from. However, I do have once question regarding shiny metallic paints in particular. Do they pose any specific issues? For example, must a primer be used? Is enamel metallic vs. acrylic metallic paint better? Any help would be greatly appreciated!
User avatar
Rhinox23
Fuzor
Posts: 265
News Credits: 1
Joined: Wed Aug 04, 2010 4:26 pm
Location: Georgia, USA
Buy from Rhinox23 on eBay

Re: Tips and tricks

Postby SKYWARPED_128 » Tue Feb 19, 2013 1:03 am

Weapon: Null-Ray Rifle
Rhinox23 wrote:Hey guys. I'm planning on starting my first customization here soon...TFP Beast Hunters Starscream into Beast Wars Terrosaur! I've read all of the posts in this thread and have a great point to start from. However, I do have once question regarding shiny metallic paints in particular. Do they pose any specific issues? For example, must a primer be used? Is enamel metallic vs. acrylic metallic paint better? Any help would be greatly appreciated!


The thing about metallic paints is that they tend to come off more easily than solid colors (if I'm not mistaken) due to the metal particles in the paint. Primer is recommended to give the paint some "tooth" to grab onto the surface.

As far as enamel vs acrylics, enamels are tougher than acrylics and "bite" into the plastic more, which in turn presents the issue of melting plastic. That said, a coat of primer should protect the plastic surface. I've never personally used enamels, but it supposedly takes longer to dry than acrylics.

Acrylic is the "gentlest" of paint mediums, as it is the least corrosive against plastic. But that also means that it is the most easily scratched off. Again, a coat of primer will help with adhesion. NOTE: Tamiya acrylics are formulated for use with an airbrush. Applying these paints with paint brushes will generally give you a an uneven coat of paint, especially on large areas. If you must use a paint brush with Tamiya paints, limit it to detailing work or small areas.

BTW, most if not all spray paint is lacquer based, which is the most corrosive of the three paint types. Make sure to apply the paint in light coats instead of one heavy coat.

Clear coating a metallic surface is also recommended to protect it from constant handling. If you can get your hands on Future Floor Polish, it's probably the best candidate to protect your painted surface, as it leaves a tough, glossy surface. And since it's acrylic-based, it's also safe enough to use over all three paint types.

NOTE: Certain metallic paints cannot be coated with clear spray, such as Tamiya's TS-83 metallic silver. Doing so will turn that shiny silver surface into a dull gray.

TL;DR, whatever you choose to use, applying primer is always a good idea.

Tamiya acrylics are meant to be used with an airbrush.

Future Floor Polish makes the best glossy clear coat, and can even be applied with a paint brush.

Hope this helps.
SKYWARPED_128
Gestalt
Posts: 2837
News Credits: 1
Joined: Tue Jun 23, 2009 7:20 pm
Strength: Infinity
Intelligence: 9
Speed: Infinity
Endurance: 10+
Rank: 9
Courage: 10
Firepower: Infinity
Skill: 10+

Re: Tips and tricks

Postby Rhinox23 » Tue Feb 19, 2013 8:04 am

SKYWARPED_128 wrote:The thing about metallic paints is that they tend to come off more easily than solid colors (if I'm not mistaken) due to the metal particles in the paint. Primer is recommended to give the paint some "tooth" to grab onto the surface.

As far as enamel vs acrylics, enamels are tougher than acrylics and "bite" into the plastic more, which in turn presents the issue of melting plastic. That said, a coat of primer should protect the plastic surface. I've never personally used enamels, but it supposedly takes longer to dry than acrylics.

Acrylic is the "gentlest" of paint mediums, as it is the least corrosive against plastic. But that also means that it is the most easily scratched off. Again, a coat of primer will help with adhesion. NOTE: Tamiya acrylics are formulated for use with an airbrush. Applying these paints with paint brushes will generally give you a an uneven coat of paint, especially on large areas. If you must use a paint brush with Tamiya paints, limit it to detailing work or small areas.

BTW, most if not all spray paint is lacquer based, which is the most corrosive of the three paint types. Make sure to apply the paint in light coats instead of one heavy coat.

Clear coating a metallic surface is also recommended to protect it from constant handling. If you can get your hands on Future Floor Polish, it's probably the best candidate to protect your painted surface, as it leaves a tough, glossy surface. And since it's acrylic-based, it's also safe enough to use over all three paint types.

NOTE: Certain metallic paints cannot be coated with clear spray, such as Tamiya's TS-83 metallic silver. Doing so will turn that shiny silver surface into a dull gray.

TL;DR, whatever you choose to use, applying primer is always a good idea.

Tamiya acrylics are meant to be used with an airbrush.

Future Floor Polish makes the best glossy clear coat, and can even be applied with a paint brush.

Hope this helps.


Thanks for all of your advice! I will definitely plan out what paints I intend to buy according to your tips. I really appreciate the help. :D
User avatar
Rhinox23
Fuzor
Posts: 265
News Credits: 1
Joined: Wed Aug 04, 2010 4:26 pm
Location: Georgia, USA
Buy from Rhinox23 on eBay

Re: Tips and tricks

Postby SKYWARPED_128 » Tue Feb 19, 2013 7:46 pm

Weapon: Null-Ray Rifle
Rhinox23 wrote:
SKYWARPED_128 wrote:The thing about metallic paints is that they tend to come off more easily than solid colors (if I'm not mistaken) due to the metal particles in the paint. Primer is recommended to give the paint some "tooth" to grab onto the surface.

As far as enamel vs acrylics, enamels are tougher than acrylics and "bite" into the plastic more, which in turn presents the issue of melting plastic. That said, a coat of primer should protect the plastic surface. I've never personally used enamels, but it supposedly takes longer to dry than acrylics.

Acrylic is the "gentlest" of paint mediums, as it is the least corrosive against plastic. But that also means that it is the most easily scratched off. Again, a coat of primer will help with adhesion. NOTE: Tamiya acrylics are formulated for use with an airbrush. Applying these paints with paint brushes will generally give you a an uneven coat of paint, especially on large areas. If you must use a paint brush with Tamiya paints, limit it to detailing work or small areas.

BTW, most if not all spray paint is lacquer based, which is the most corrosive of the three paint types. Make sure to apply the paint in light coats instead of one heavy coat.

Clear coating a metallic surface is also recommended to protect it from constant handling. If you can get your hands on Future Floor Polish, it's probably the best candidate to protect your painted surface, as it leaves a tough, glossy surface. And since it's acrylic-based, it's also safe enough to use over all three paint types.

NOTE: Certain metallic paints cannot be coated with clear spray, such as Tamiya's TS-83 metallic silver. Doing so will turn that shiny silver surface into a dull gray.

TL;DR, whatever you choose to use, applying primer is always a good idea.

Tamiya acrylics are meant to be used with an airbrush.

Future Floor Polish makes the best glossy clear coat, and can even be applied with a paint brush.

Hope this helps.


Thanks for all of your advice! I will definitely plan out what paints I intend to buy according to your tips. I really appreciate the help. :D


Glad I could help! :D
SKYWARPED_128
Gestalt
Posts: 2837
News Credits: 1
Joined: Tue Jun 23, 2009 7:20 pm
Strength: Infinity
Intelligence: 9
Speed: Infinity
Endurance: 10+
Rank: 9
Courage: 10
Firepower: Infinity
Skill: 10+

Re: Tips and tricks

Postby Prime643 » Wed Feb 20, 2013 7:55 am

Motto: ""Adapt and Overcome""
Weapon: Arm-Mounted Magnetic-Lock Destabilizer Cannon
Has anyone found a particular type of paint to use on the soft rubber that some transformers have? I tried testors acrylics so far and it does indeed dry awesome, but it flakes off. Any help or tips would be welcome :-?
Image
User avatar
Prime643
Minibot
Posts: 100
Joined: Wed Sep 08, 2010 8:17 am
Location: MA
Strength: 8
Intelligence: 9
Speed: 6
Endurance: 8
Rank: 5
Courage: 10
Firepower: 10
Skill: 10

Re: Tips and tricks

Postby SKYWARPED_128 » Wed Feb 20, 2013 9:10 pm

Weapon: Null-Ray Rifle
Mindewipe24 wrote:Has anyone found a particular type of paint to use on the soft rubber that some transformers have? I tried testors acrylics so far and it does indeed dry awesome, but it flakes off. Any help or tips would be welcome :-?


Try priming the rubber parts first. I adds more "tooth" to the surface, allowing better adhesion.

The real problem here is, if or when you flex the rubber part in any way, the paint will probably crack and flake off.

I've never painted over soft rubber before, so I can only give you general suggestions.

Hope it helps, though.
SKYWARPED_128
Gestalt
Posts: 2837
News Credits: 1
Joined: Tue Jun 23, 2009 7:20 pm
Strength: Infinity
Intelligence: 9
Speed: Infinity
Endurance: 10+
Rank: 9
Courage: 10
Firepower: Infinity
Skill: 10+

Re: Tips and tricks

Postby Nemesis Maximo » Mon Mar 18, 2013 7:03 pm

Motto: "Always Be’s-ing and do’s-ing, never cheesing or choosing!"
Weapon: Gatling Cannon
To the big time customizers here, how would you reccommend adding scars to my figures? Do you just cut details with exacto knives, or would you use a saudering iron?
Back at it again!
Marvel Legends Domino

SW's SilverHammer wrote:Eat my ass funpub.

Burn wrote:And this is for taking Nemesis Maximo seriously.
*high fives Silly in the face*

carytheone wrote:I can't be assed to do any better right now.
User avatar
Nemesis Maximo
Gestalt
Posts: 2658
Joined: Mon Dec 24, 2012 11:59 pm
Location: Northern Lower Michigan
Alt Mode: Lounge Lizard
Strength: 8
Intelligence: 8
Speed: 5
Endurance: 6
Rank: 5
Courage: 10
Firepower: 10+
Skill: 7

Re: Tips and tricks

Postby Prime643 » Mon Mar 18, 2013 7:20 pm

Motto: ""Adapt and Overcome""
Weapon: Arm-Mounted Magnetic-Lock Destabilizer Cannon
You can use an xacto knife, dremel with a small cutting bit, or a drill bit to get different damage effects. you can use a soldering iron, but I prefer the methods above. Experiment on a scrap piece of plastic and see what effects you can produce, and what you are looking for!
Also Google is your friend, there are tons of guides out there showing how to attain different effects.

Good luck!
:CON:
Image
User avatar
Prime643
Minibot
Posts: 100
Joined: Wed Sep 08, 2010 8:17 am
Location: MA
Strength: 8
Intelligence: 9
Speed: 6
Endurance: 8
Rank: 5
Courage: 10
Firepower: 10
Skill: 10

Re: Tips and tricks

Postby SKYWARPED_128 » Mon Mar 18, 2013 7:32 pm

Weapon: Null-Ray Rifle
Nemesis Maximo wrote:To the big time customizers here, how would you reccommend adding scars to my figures? Do you just cut details with exacto knives, or would you use a saudering iron?


It all depends on what kind of damage you're looking for. Bullet holes are usually done with drill bits (pin vise or electric drill/rotary tool), and "laser-melted" effects are done using a soldering iron. For sword slashes, naturally you'd use an X-acto knife.

BTW, lightly painting the damage with silver paint to simulate exposed metal brings the effects to life.

Hope this helps.
SKYWARPED_128
Gestalt
Posts: 2837
News Credits: 1
Joined: Tue Jun 23, 2009 7:20 pm
Strength: Infinity
Intelligence: 9
Speed: Infinity
Endurance: 10+
Rank: 9
Courage: 10
Firepower: Infinity
Skill: 10+

Re: Tips and tricks

Postby Nemesis Maximo » Mon Mar 18, 2013 7:39 pm

Motto: "Always Be’s-ing and do’s-ing, never cheesing or choosing!"
Weapon: Gatling Cannon
Thanks to both Mindwipe24 ans Skywarped_128. Those are some techniques that I've wanted to try, and I will!
Back at it again!
Marvel Legends Domino

SW's SilverHammer wrote:Eat my ass funpub.

Burn wrote:And this is for taking Nemesis Maximo seriously.
*high fives Silly in the face*

carytheone wrote:I can't be assed to do any better right now.
User avatar
Nemesis Maximo
Gestalt
Posts: 2658
Joined: Mon Dec 24, 2012 11:59 pm
Location: Northern Lower Michigan
Alt Mode: Lounge Lizard
Strength: 8
Intelligence: 8
Speed: 5
Endurance: 6
Rank: 5
Courage: 10
Firepower: 10+
Skill: 7

Re: Tips and tricks

Postby devlingrey » Mon Apr 08, 2013 1:04 pm

Motto: ""In the immortal words of Socrates. . . I drank what?"
- Val Kilmer in Real Genius"
Weapon: Gattling Gun
Hello,

I am working on my first repaint. I am turning a Machine Wars Prowl into a Super Ninja Counter (red and white deco with the orange head).

I think I have the painting down, especially after reading through this thread (so thank you to all who have been posting tips and tricks, as a novice I really appreciate it). My question is about the head.

I want to reshape/craft another head that looks more like the spy changer head. Does anyone have any experience in crafting a head from a type of putty or clay? If so, what type would you use? If not, does anyone have any ideas of a bot's head that would match the Machine wars size that I could swap out?

Thanks in advance!

Michael
devlingrey
Micromaster
Posts: 55
Joined: Sat Feb 09, 2008 7:29 am
Location: Virginia
Buy from devlingrey on eBay

Re: Tips and tricks

Postby SkyWarpsGhost » Sun Apr 14, 2013 4:32 am

Weapon: Dual Photon Launchers
I recently got 2012 Predaking and he has a problem.

The glue on the original factory sticker sheet has dried up, but the stickers still come off fine. Just don't stick very well.

I'm looking for something I could brush on or some other method to try to re use the original sticker sheet.
I've a re-production sticker sheet, but it's no where near as good as the original.
MOC Kreo/Legoformer Sentinel Prime
moc-kreo-legoformer-sentinel-prime-t98257.php
MOC Kreo/Legoformer Nemesis Prime v2
moc-kreo-legoformer-nemesis-prime-v2-t97374s100.php
MOC Kreo/Legoformer Dotm Megatron
moc-kreo-legoformer-megatron-t97289.php
MOC Kreo/Legoformer Prime and Magnus
transforming-legokreoformer-optimus-magnus-t94770s200.php
SkyWarpsGhost
Combiner
Posts: 409
News Credits: 1
Joined: Thu Nov 10, 2011 11:38 am
Location: Belfast N.I.
Strength: 8
Intelligence: 7
Speed: Infinity
Endurance: 8
Rank: 8
Courage: 6
Firepower: 9
Skill: 7

Re: Tips and tricks

Postby SKYWARPED_128 » Sun Apr 14, 2013 5:03 am

Weapon: Null-Ray Rifle
SkyWarpsGhost wrote:I recently got 2012 Predaking and he has a problem.

The glue on the original factory sticker sheet has dried up, but the stickers still come off fine. Just don't stick very well.

I'm looking for something I could brush on or some other method to try to re use the original sticker sheet.
I've a re-production sticker sheet, but it's no where near as good as the original.


Try using some spray-on glue, and then applying a coat of Future floor polish to seal the sticker. FFP dries to a hard shell, protecting and sealing the sticker from future deformation. The only thing is that FFP is very glossy, and you might not like the finish on them.

DISCLAIMER: I haven't tried this personally, but it should work in theory. Using the spray-on glue is certainly harmless.
SKYWARPED_128
Gestalt
Posts: 2837
News Credits: 1
Joined: Tue Jun 23, 2009 7:20 pm
Strength: Infinity
Intelligence: 9
Speed: Infinity
Endurance: 10+
Rank: 9
Courage: 10
Firepower: Infinity
Skill: 10+

Re: Tips and tricks

Postby Maximalnomore » Wed Oct 02, 2013 4:35 pm

Motto: ""Tell my tale to those who ask. Tell it truly. The ill deeds, along with the good. And let me be judged accordingly. The rest, is silence.""
I've got the Armada Unicron and would like to change the LED in his head so that he will have green eyes (and maybe switch it so that the eyes can be turned on and off, and when on, they won't blink). Does anyone know of any good tutorials, or maybe if you've done it yourself, could someone post a tutorial? I scoured the internet, but couldn't find anything.

I know there was a post about this back in 2011, but the person only showed the result and didn't say how they did it.

I just don't want to accidentally destroy the figure since I don't have much experience with LED's.

Thanks!
User avatar
Maximalnomore
Mini-Con
Posts: 24
Joined: Tue Jan 08, 2013 2:25 am
Strength: 2
Intelligence: 9
Speed: 10
Endurance: 10+
Rank: 8
Courage: 7
Firepower: 5
Skill: 9

Re: Tips and tricks

Postby Maximalnomore » Wed Oct 02, 2013 4:45 pm

Motto: ""Tell my tale to those who ask. Tell it truly. The ill deeds, along with the good. And let me be judged accordingly. The rest, is silence.""
Hey devlingrey, in response to your head sculpting question...

Does anyone have any experience in crafting a head from a type of putty or clay? If so, what type would you use?


I would use Aves Fixit Sculpt. It's similar to epoxy, but much easier to use. It molds just like clay, but is water soluble so it can easily be smoothed out and blended together. It does take 24 hours to fully cure, but once it does, it's really really durable and strong.

I've used the stuff for lots of Transformers work. It also works great for filling in the hollow arms and legs that Hasbro often uses to save on plastic. You can get the stuff here, http://www.avesstudio.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=75&category_id=7&option=com_virtuemart&Itemid=1&vmcchk=1&Itemid=1

As a side note, it helps to wet your sculpting tools when using this, since it's water soluble.
User avatar
Maximalnomore
Mini-Con
Posts: 24
Joined: Tue Jan 08, 2013 2:25 am
Strength: 2
Intelligence: 9
Speed: 10
Endurance: 10+
Rank: 8
Courage: 7
Firepower: 5
Skill: 9

Re: Tips and tricks

Postby EnJaySee » Mon Oct 14, 2013 9:21 am

The best way to remove one ended pins (especially pesky wheel ones)? Drill 'em out! I use a 1mm drill bit to drill in from the other side. Then pin-push then out and fill in the holes... No one will ever know ;-)
EnJaySee
Mini-Con
Posts: 13
Joined: Thu Oct 10, 2013 10:09 am
Location: Cornwall - UK
Buy from EnJaySee on eBay
Strength: 10
Intelligence: 10
Speed: 10
Endurance: 10
Rank: 10
Courage: 10
Firepower: 10
Skill: 10

Re: Tips and tricks

Postby Maximalnomore » Mon Oct 14, 2013 10:09 am

Motto: ""Tell my tale to those who ask. Tell it truly. The ill deeds, along with the good. And let me be judged accordingly. The rest, is silence.""
The best way to remove one ended pins (especially pesky wheel ones)? Drill 'em out! I use a 1mm drill bit to drill in from the other side. Then pin-push then out and fill in the holes... No one will ever know ;-)


Or, just heat the surface of the pin with a soldering iron. You don't need to melt the plastic, just heat it enough so that you can putt the pin free. It'll slide right out... No one will ever know :-)

Also, this usually doesn't damage the pin, so you can reuse it for something else later if you need it.
User avatar
Maximalnomore
Mini-Con
Posts: 24
Joined: Tue Jan 08, 2013 2:25 am
Strength: 2
Intelligence: 9
Speed: 10
Endurance: 10+
Rank: 8
Courage: 7
Firepower: 5
Skill: 9

Re: Tips and tricks

Postby EnJaySee » Mon Oct 14, 2013 1:52 pm

Maximalnomore wrote:
The best way to remove one ended pins (especially pesky wheel ones)? Drill 'em out! I use a 1mm drill bit to drill in from the other side. Then pin-push then out and fill in the holes... No one will ever know ;-)


Or, just heat the surface of the pin with a soldering iron. You don't need to melt the plastic, just heat it enough so that you can putt the pin free. It'll slide right out... No one will ever know :-)

Also, this usually doesn't damage the pin, so you can reuse it for something else later if you need it.


Personally I don't like doing that although I know it's a popular method. I've done it in the past with varying degrees of success. I feel like I'm not completely in control of what's happening to the plastic but with a drill I am. It boils down to which method is best for each person and for me, the drill is the way :)
EnJaySee
Mini-Con
Posts: 13
Joined: Thu Oct 10, 2013 10:09 am
Location: Cornwall - UK
Buy from EnJaySee on eBay
Strength: 10
Intelligence: 10
Speed: 10
Endurance: 10
Rank: 10
Courage: 10
Firepower: 10
Skill: 10

Re: Tips and tricks

Postby Wh33l Jck » Sun Oct 27, 2013 3:01 pm

Hey everyone, I'm looking for tips on dyeing figures with RIT dye for the first time. I want to dye Igear Duneraker a darker shade of blue because I would rather avoid painting and dealing with paint chipping.

I saw that you need to find the old RIT dye pre 2011 because the new RIT doesn't dye plastic due to a newer formula. Has anyone found this is this the case?

Also, I don't want to warp the figure, any tips how to make sure that doesn't happen. I know you don't want the water boiling, but I know it doesn't take much to melt plastic.

on TFW there is a tutorial saying only dip 3-5 seconds at a time. How long does it take before getting results???


Also how permanent is the dye? It won't oxidize and fade or do something funky over time will it?
Wh33l Jck
Targetmaster
Posts: 650
Joined: Sun Dec 04, 2011 11:05 pm

Re: Tips and tricks

Postby massprime » Wed Oct 30, 2013 12:40 am

I need some ideas bad here. The arm of my MP 14 broke off at the bicep swivel. It was stuck and wouldn't budge after I transformed him to robot mode. Well you can guess what happened next. Yeah he;s a KO. But I only got him because at the time he was first released I got Sideswipe instead not knowing his price would jump like it has before I decided to get him. Either way he is still made of very good quality and this is the only issue I have with him. Can anyone think of anything?
massprime
Micromaster
Posts: 77
Joined: Mon Mar 17, 2008 10:48 am

Re: Tips and tricks

Postby Nighttracker » Thu Apr 17, 2014 6:41 am

Motto: "No Sacrifice No Victory"
Weapon: Star Saber Sword
what all do you need to customize a Transformer?
Image
User avatar
Nighttracker
Mini-Con
Posts: 17
Joined: Wed Oct 31, 2012 11:36 pm
Alt Mode: Jet
Strength: 7
Intelligence: 7
Speed: 6
Endurance: 10
Rank: 6
Courage: 10
Firepower: 8
Skill: 7

Re: Tips and tricks

Postby Wh33l Jck » Sun Jul 20, 2014 12:21 pm

Does anyone know of anything stronger than Future Floor polish?

It seems to work if you don't plan to transform customs, but if things slightly rub, it seems not to hold up, especially over metallic enamel paints.

Is there any thing that you can use over both acrylics and enamels that is heavy duty strong?

What do the official factories use?
Wh33l Jck
Targetmaster
Posts: 650
Joined: Sun Dec 04, 2011 11:05 pm

Re: Tips and tricks

Postby venort » Sun Jul 27, 2014 9:49 am

Weapon: Electron Scimitar Sword
Does anyone have any general advice for working with the BW Terrorsaur mold?

I ended up accidentally ordering two of that AoE Bumblebee and Strafe two-pack, and I've decided to give repainting a shot with the second. Bee looks to be the easier of the two (given that I can leave anything molded in black unpainted), but Strafe looks to be a little more complex, at least torso-wise (although again, anything black is staying black, more or less).
venort
Mini-Con
Posts: 4
Joined: Tue Jul 31, 2012 1:09 pm
Strength: 5
Intelligence: 7
Speed: 4
Endurance: 8
Rank: 3
Courage: 3
Firepower: 6
Skill: 5

Re: Tips and tricks

Postby pbz313 » Wed Aug 20, 2014 4:29 pm

Motto: "why me?"
warzon3 wrote:Does anyone know of anything stronger than Future Floor polish?

It seems to work if you don't plan to transform customs, but if things slightly rub, it seems not to hold up, especially over metallic enamel paints.

Is there any thing that you can use over both acrylics and enamels that is heavy duty strong?

What do the official factories use?


I use Krylon clear coat. It holds up pretty well to abrasion, but I tend to give a bout 2-3 coats before I call it good.
pbz313
Micromaster
Posts: 53
Joined: Thu Dec 09, 2010 7:31 am
Location: Rocky Mountains

Re: Tips and tricks

Postby Madeus Prime » Sat Sep 20, 2014 10:50 am

Motto: "Rule #45 of the Madeus Handbook: Timey wimey is an adequate term for scienc-y stuff."
Anybody have any advice on how to tighten up the AOE Two-Pack Classics Prime's shoulders?
Image
Madeus Prime art credited to SillySpringer
User avatar
Madeus Prime
City Commander
Posts: 3099
News Credits: 23
Joined: Mon Dec 02, 2013 6:19 pm
Location: Spokane, WA.
Strength: Infinity
Intelligence: 7
Speed: Infinity
Endurance: 10+
Rank: Infinity
Courage: 6
Firepower: Infinity
Skill: 10+

PreviousNext

Return to Customizations

Transformers and More @ The Seibertron Store

Visit our store on eBay
These are affiliate links. We may earn commissions when you purchase items or services through these links.
Visit shop.seibertron.com to buy "TRANSFORMERS #5 Cvr A Image Comics 2024 Skybound 1223IM323 5A (CA) Johnson"
NEW!
TRANSFORMERS #5 Cv ...
Visit shop.seibertron.com to buy "Transformers REIGN STARSCREAM #4 Cvr A IDW Comics 2008 Movie Sequel 4A 210411A"
Transformers REIGN ...
Visit shop.seibertron.com to buy "Transformers SHATTERED GLASS #2 RI 1:10 IDW Comics 2021 2RI (CA) Pitre-Durocher"
Transformers SHATT ...
Visit shop.seibertron.com to buy "TRANSFORMERS BEAST WARS #9 RI 1:10 IDW Comics 2021 AUG210585 9RI (CA) Milne"
TRANSFORMERS BEAST ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #29 Marvel Comics 1987 (W/CA) Budiansky 231010H"
NEW!
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "TRANSFORMERS GALAXIES #10 Cvr B IDW Comics 2020 APR200733 10B (CA) Deer"
TRANSFORMERS GALAX ...
Visit shop.seibertron.com to buy "Transformers HALLOWEEN SPECIAL #1 IDW Comics 2021 JUL210491 (CA)Goux (W) Watters"
Transformers HALLO ...
Visit shop.seibertron.com to buy "Transformers SECTOR 7 #1 (of 5) Cover A IDW Comics 2010 (CA) Rood 200212a"
Transformers SECTO ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #7 1st ptg Marvel Comics 1985 (CA) Bright (W) Budiansky 230915X"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "TRANSFORMERS #11 RI Retail Incentive 1:10 IDW Comics 2019 BOLD NEW ERA 11RI"
TRANSFORMERS #11 R ...
Visit shop.seibertron.com to buy "TRANSFORMERS HEADMASTERS #1 Marvel Comics 1987 (A)Springer (W) Budiansky 230926I"
TRANSFORMERS HEADM ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #5 1st ptg Marvel Comics 1985 (CA) Bright (W) Budiansky 230915Q"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "TRANSFORMERS #41 RI 1:10 IDW Comics 2022 JAN220489 41RI (CA) Samu"
TRANSFORMERS #41 R ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #26 Marvel Comics 1987 (CA) Trimpe (W) Budiansky 231010C"
NEW!
THE TRANSFORMERS # ...
* Price and quantities subject to change. Shipping costs, taxes and other fees not included in cost shown. Refer to listing for current price and availability.
Find the items above and thousands more at the Seibertron Store on eBay
Transformers Podcast: Twincast / Podcast #346 - Gas Station Jamboree
Twincast / Podcast #346:
"Gas Station Jamboree"
MP3 · iTunes · RSS · View · Discuss · Ask
Posted: Saturday, March 23rd, 2024

Featured Products on Amazon.com

These are affiliate links. We may earn commissions when you purchase items or services through these links.
Buy "Transformers Generations Titans Return Titan Class Trypticon" on AMAZON
Buy "Transformers Deluxe 20 Mercenary Action Figure" on AMAZON
Buy "Transformers: Generations Power of The Primes Megatronus Prime Master" on AMAZON
Buy "Transformers: Bumblebee Movie Toys, Power Charge Bumblebee Action Figure - Spinning Core, Lights and Sounds - Toys for Kids 6 and Up, 10.5-inch" on AMAZON
Buy "Transformers Generations Power of the Primes Deluxe Class Autobot Novastar" on AMAZON
Buy "Transformers Generations Titans Return Deluxe Twin Twist and Flameout" on AMAZON
Buy "Transformers Titans Return Repugnus, Dastard, and Solus Prime Prime Master" on AMAZON
Buy "Transformers Combiner Wars Blast Off Megatronus Prime Master" on AMAZON
Buy "TRANSFORMERS PLATINUM EDITION HOT ROD JUNKION SCRAPHEAP WRECK GAR SET" on AMAZON
Buy "Transformers: The Last Knight Premier Edition Deluxe Strafe" on AMAZON
Buy "Transformers Generations Titans Return Titan Master Furos and Hardhead" on AMAZON
Buy "Transformers Generations Combiner Wars Deluxe Class Trailbreaker" on AMAZON