Page 1 of 2

ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 2:12 pm
by El Duque
ToyWorld.jp, the folks behind Hegemon, are teasing an upcoming project. Speculate away, though it appears to be Optimus Prime based on his current IDW appearance:

Image

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 3:30 pm
by Doctor McGrath
A possible competitor to replace Heritage Optimus Prime?!? Color me interested.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 3:40 pm
by Mkall
I don't know, but it he's as awesome as their Hegemon, then I'm all for it.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 4:43 pm
by craggy
there's no shortage of official Optimus Primes of all shapes and sizes. It'd take something quite impressive for me to be interested in a 3rd party one.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 4:53 pm
by Dead Metal
I would much prefer the old idw Prime design by E.J. Sue. But this does have potential, lets just hope they stay away from unnecessary translucent plastic.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 4:53 pm
by necr0blivion
Disappointed...

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 5:59 pm
by Rated X
YES !!! I needed a Prime because Hasbro just refuses to make one !!! Maybe next they can give us Bumblebee !!!

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 6:50 pm
by daimchoc
Image

Image

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 7:04 pm
by Mkall
daimchoc wrote:Image

Image

I find it hilarious that the most common complaint I hear about Classics Prime is the doors on his arms. Well if this one is true to sketch, then it would seem that there would be the same complaint here. However it is possible that these doors could become flush with his arms like a buckler-shield or something.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 7:38 pm
by Doctor McGrath
Mkall wrote:
daimchoc wrote:Image

Image

I find it hilarious that the most common complaint I hear about Classics Prime is the doors on his arms. Well if this one is true to sketch, then it would seem that there would be the same complaint here. However it is possible that these doors could become flush with his arms like a buckler-shield or something.


These door arms don't seem as out of place though. If they stay true to the sketch, they won't stand out as bad I guess. I don't like the windvane on the cab though.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 9:17 pm
by Mkall
amcgrath929 wrote:
Mkall wrote:
daimchoc wrote:...

I find it hilarious that the most common complaint I hear about Classics Prime is the doors on his arms. Well if this one is true to sketch, then it would seem that there would be the same complaint here. However it is possible that these doors could become flush with his arms like a buckler-shield or something.


These door arms don't seem as out of place though. If they stay true to the sketch, they won't stand out as bad I guess. I don't like the windvane on the cab though.

I find the sketch a little too off-classics for my liking, but then again we haven't seen the actual figure yet so I'll hold on my judgements until then.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sat May 26, 2012 10:11 pm
by DevastaTTor
The last set of Hegemon photos didn't do much for me-not going to get too excited about this until we get some Hegemon reviews first.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sun May 27, 2012 1:17 am
by Shadowstream
...okay, my interest is perked. I enjoy the Classics leader molds, kibble and all, and I really liked that the current IDW Optimus is at least in small part homaging it through the arm kibble. If this is good, and I can afford it, I may put aside some coin for him.

Not sure about a trailer though.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sun May 27, 2012 1:45 am
by zodconvoy
I like the designs from the first Ongoing arc so I'll give it a shot. If they were to make a Ultra Magnus or Swindle oh, dear Primus they wouldn't be able to ask for too much money!

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sun May 27, 2012 6:22 am
by craggy
if a company wants guaranteed money from me for one of the designs from that comic, it has to be Menasor. Still, I do quite like that Prime design. I suppose, if it works out to being the same price as hunting down a Henkei Prime, and is the right sort of size, I might be interested.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sun May 27, 2012 10:01 am
by Doctor McGrath
zodconvoy wrote:I like the designs from the first Ongoing arc so I'll give it a shot. If they were to make a Ultra Magnus or Swindle oh, dear Primus they wouldn't be able to ask for too much money!


I would be 100% behind an IDW style Ultra Magnus as well.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sun May 27, 2012 9:29 pm
by Counterpunch
Henkei Convoy (Prime) is the standard by which all Classics toys are compared against.

It isn't perfect.

However, it is the standard for Magnus/City Commander, SG Prime, and so much of our Classics shelves in terms of scale and proportion.

While Classics Megatron was kind of always a better figure, it was always a bit of an outsider in regards to its looks.

Personally, I doubt I would ever replace Prime at this point. Any potential replacement would need to be far, far better than Henkei Convoy and would need to be G3 Trailer compatible.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Sun May 27, 2012 9:37 pm
by Gauntlet101010
Henkei Megatron has one big thing going gainst him: those wings. They hinder the way he can be displayed and posed. They just get in the way.

But I rather like Classics Prime. And, yeah, he has a trailer already and everything. I don't think I'll be replacing him.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Mon May 28, 2012 12:00 am
by zodconvoy
Counterpunch wrote:Henkei Convoy (Prime) is the standard by which all Classics toys are compared against.

It isn't perfect.

However, it is the standard for Magnus/City Commander, SG Prime, and so much of our Classics shelves in terms of scale and proportion.

While Classics Megatron was kind of always a better figure, it was always a bit of an outsider in regards to its looks.

Personally, I doubt I would ever replace Prime at this point. Any potential replacement would need to be far, far better than Henkei Convoy and would need to be G3 Trailer compatible.


While I do look at Hedgemon as a potential Classics Megatron replacement, I do not feel that way about this potential Optimus. I view it as a stand alone figure in the Ongoing style that would have a place among my other Optimus Primes.

Again, Ultra Magnus and Swindle in that style would be just about the best damn things put out this year.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Tue May 29, 2012 12:08 pm
by Kibble
Rated X wrote:YES !!! I needed a Prime because Hasbro just refuses to make one !!! Maybe next they can give us Bumblebee !!!


:lol:

Pretty much this... It looks cool enough (if it turns out like the sketch,) but there is a limit to how many $100+ Optimus Primes I need in my collection, especially when it comes to 3rd Parties. It's a bit of a turn off when these guys are doing stuff just for shits and giggles. If 3Ps want to do stuff that HasTak for some reason just ignores, like say a Blitzwing or a proper G1 Shockwave for my Classics collection...as the annoyingly overused line goes: shut up and take my money (I'll at least spare you the lame accompanying image that goes along with it...side note: I need to start posting "in before SU&TMM" whenever something cool gets announced.) But if 3Ps want to just do random **** and charge $100 plus for it, that's when I start to agree with Seibs that this 3rd Party **** is just out of control and stupid. Yeah, there's a bit of a different spin on this guy, IDW and all, hip hip hooray. Still unnecessary. I'm very happy for the 10s out there that always wanted a proper IDW accurate Prime for $100+, though.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Tue May 29, 2012 2:13 pm
by zodconvoy
Kibble wrote:SU&TMM


SU&TM$ or whatever your national currency symbol may be.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Tue Aug 14, 2012 6:44 pm
by Hotrodimust
Gauntlet101010 wrote:Henkei Megatron has one big thing going gainst him: those wings. They hinder the way he can be displayed and posed. They just get in the way.

But I rather like Classics Prime. And, yeah, he has a trailer already and everything. I don't think I'll be replacing him.

Also how his cannon sits on his arm if you have in pointing his cannon upright at someone his hand is upside down and reversed I always dis likedthat about mine but now that I have a tw-01 my henkei Meg's is out of the picture. He is hands down the best megatron figure out IMO I even like him better than my mp-05. He is a little taller than everyone but as soon as I get this prime they should be the same height and I think the leaders should be taller than all the other bots. But if your going by actual g1 scale you may not like how tall he is

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Tue Aug 14, 2012 6:54 pm
by Gauntlet101010
Hotrodimust wrote:
Gauntlet101010 wrote:Henkei Megatron has one big thing going gainst him: those wings. They hinder the way he can be displayed and posed. They just get in the way.

But I rather like Classics Prime. And, yeah, he has a trailer already and everything. I don't think I'll be replacing him.

Also how his cannon sits on his arm if you have in pointing his cannon upright at someone his hand is upside down and reversed I always dis likedthat about mine but now that I have a tw-01 my henkei Meg's is out of the picture. He is hands down the best megatron figure out IMO I even like him better than my mp-05. He is a little taller than everyone but as soon as I get this prime they should be the same height and I think the leaders should be taller than all the other bots. But if your going by actual g1 scale you may not like how tall he is

Yeah, I don't like how tall he is. I think it's great that he's alrger than Prime, but not so great that he dwarfs Label Soundwave, the Classic Seekers and ... well, everybody else in the Decepticons.

Still, he's the best G1 Megatron mold to date. The heaight is not a deal breaker.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Tue Aug 14, 2012 9:10 pm
by Wh33l Jck
I had a question for anyone who is familiar with this IDW stlye Prime. I looked up his robot form online and he has all these extra shoulder pads and what not, but what does his vehicle mode look like...does it look G1 or does it look quasi cybertronian??? I couldn't find pictures of this comic book vehicle form online anywhere that TW-02 will most likely take after?

I'd love to get Hegemon, but too be honest I'm running out of money. Plus I modified my United Megatron pretty good. I took the wings off (popped out the pin instead of cutting). I made the cannon barrel that sticks out the back of his shoulder (pegs in right where the screw holes are in his back). I bought the black IDW/G1 Shapeways arm cannon. Finally, I made my own chest plate for him that makes his chest look more like the cartoon out of some styrene and put a foil decepticon symbol on it. All in all he looks pretty sweet, only thing that looks sort of off is his lack of black hip pads around his waist, but its no biggie. I can't seem to justify replacing him just yet.

Re: ToyWorld.jp Teases Their Next Project: TW-02

PostPosted: Tue Aug 14, 2012 9:16 pm
by Kibble
warzon3 wrote:I'd love to get Hegemon, but too be honest I'm running out of money. Plus I modified my United Megatron pretty good. I took the wings off (popped out the pin instead of cutting). I made the cannon barrel that sticks out the back of his shoulder (pegs in right where the screw holes are in his back). I bought the black IDW/G1 Shapeways arm cannon. Finally, I made my own chest plate for him that makes his chest look more like the cartoon out of some styrene and put a foil decepticon symbol on it. All in all he looks pretty sweet, only thing that looks sort of off is his lack of black hip pads around his waist, but its no biggie. I can't seem to justify replacing him just yet.


Where the pics at?