Page 1 of 2

Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Sun Jan 15, 2012 11:15 pm
by El Duque
MasterShooter Collectibles have updated their facebook page with renders of their second wave of TargetMasters. They also state pre-orders for first wave should be open soon.

MasterShooter Collectibles wrote:
Good news! Preorders should be going up within a couple of days! Stay tuned!


  • Up Close "The Maker of Peace"
  • Buzz Kill "The Sure Shot"
  • Pin Point "The Sniper"
  • High Caliber "The Slinger of Slugs"
  • Pipe Blower "The Itchy Trigger"
  • No Aim "The Misssed Shot"


Image

Image

Re: Upcoming MasterShooter Collectibles TargetMaster

PostPosted: Sun Jan 15, 2012 11:29 pm
by Bumblevivisector
Okay, let me get this straight: Third Parties have thus far overlooked the Breastmasters entirely, given us half a dozen Arcees without making her a Headmaster...and yet, we shall be blessed this year with an update of Triggerhappy's Targetmaster lawyer buddy, with his name rearranged to "Pipe-Blower".

I can already hear him claiming intellectual property rights on random Tracks jokes.

Hell, I can already hear every joke I've made about "Ass-Masters" (Armada Hot Shot, etc.) being declared too subtle.

But seriously, glad these guys are finally getting new figs. Next they need to give the Double-Targetmasters some articulation and more elaborate combinations.

Re: Upcoming MasterShooter Collectibles TargetMaster

PostPosted: Sun Jan 15, 2012 11:36 pm
by UltraPrimal
Is it just me or are all of these guys just more or less remolds of each other?

Re: Upcoming MasterShooter Collectibles TargetMaster

PostPosted: Sun Jan 15, 2012 11:57 pm
by MINDVVIPE
They all have the exact same head. LAME.

Re: Upcoming MasterShooter Collectibles TargetMaster

PostPosted: Mon Jan 16, 2012 1:06 am
by Rated X
I was just talking about these guys in the mini-con thread...and BAMM here they are !!!

Honestly though, I dont need targetmasters for characters that dont even have a figure yet. I may buy them, just in case. This might encourage 3rd parties to make Slugslinger, Triggerhappy, Misfire, etc. Hell, this might even get Hasbro motivated ! (yeah right)

But for now, Im more interested in their versions of Haywire, Recoil, and Fracas to go with their existing partners.

Re: Upcoming MasterShooter Collectibles TargetMaster

PostPosted: Mon Jan 16, 2012 1:19 am
by Mkall
I don't think I need these, although I'm sure my oppinion will change when I see them all done up in plastic

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 3:09 am
by necr0blivion
Good that progress is coming along. ***EDIT*** But I'm really looking forward to the first 4 figures.

And who didn't love the name "Shot Piece"?!?!? Now we have even more ridiculous names, but more weapons to play with.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 3:53 am
by Trikeboy
UltraPrimal wrote:Is it just me or are all of these guys just more or less remolds of each other?


I was about to argue that you don't have much option with figs this small that become weapons but on closer inspection, I have to agree with you. I actually don't like them for that reason and the fact they all have the same head. There are some really cool target masters on shapeways and they are all different. I might pick them up instead of these. Take a look here and see what Classics Targetmasters should look like: http://www.shapeways.com/hisdesign?user_id=43978

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 7:01 am
by Sodan-1
It's hard to be sure looking at these images but I think there is a slight difference in the heads. Some of them have tall noses and seperated eyes, while those with the shortened noses are sporting visors.

Either way, I'm not too fussed by these. I'm impressed with the amount of variations that can be made using, what, two chest molds and two legs molds as well as alternating colours, but there's just too much repetition for me. These would be great for a neo-G1 collection, but HasTak's Universe Nightstick and FansProject's Sidearm have spoiled me for Classics Targetmasters.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 10:02 am
by Optimusfan79
These look awesome, we needed these just in case we don't see those other molds later on. I have energon Slugslinger & Sharkticon, with that I can use Sharkticon as Triggerhappy which he resembles a little then use Caliburst & Blowpipe for & I now have 2 Decepticon targetmasters down with one to go.

Again I have Cybertron Hotshot which I can use as Pointblank & Cybertron Defense Hotshot I can use as Crosshairs use Pinpointer & Peacemaker, two down & 1 to go.

So the way folks customize or if not, these are molds that can be used to represent the bot to use these guns properly. These are great ideas great concepts considering that hasbro/takara has been bsing, head sculpt body all look fine to me its a must have to a true collector. :KREMZEEK:

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 12:00 pm
by Rated X
Optimusfan79 wrote:These look awesome, we needed these just in case we don't see those other molds later on. I have energon Slugslinger & Sharkticon, with that I can use Sharkticon as Triggerhappy which he resembles a little then use Caliburst & Blowpipe for & I now have 2 Decepticon targetmasters down with one to go.

Again I have Cybertron Hotshot which I can use as Pointblank & Cybertron Defense Hotshot I can use as Crosshairs use Pinpointer & Peacemaker, two down & 1 to go.

So the way folks customize or if not, these are molds that can be used to represent the bot to use these guns properly. These are great ideas great concepts considering that hasbro/takara has been bsing, head sculpt body all look fine to me its a must have to a true collector. :KREMZEEK:



Please explain to me how energon Sharkticon resembles Triggerhappy...

Image

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 12:19 pm
by Dead Metal
Rated X wrote:
Optimusfan79 wrote:These look awesome, we needed these just in case we don't see those other molds later on. I have energon Slugslinger & Sharkticon, with that I can use Sharkticon as Triggerhappy which he resembles a little then use Caliburst & Blowpipe for & I now have 2 Decepticon targetmasters down with one to go.

Again I have Cybertron Hotshot which I can use as Pointblank & Cybertron Defense Hotshot I can use as Crosshairs use Pinpointer & Peacemaker, two down & 1 to go.

So the way folks customize or if not, these are molds that can be used to represent the bot to use these guns properly. These are great ideas great concepts considering that hasbro/takara has been bsing, head sculpt body all look fine to me its a must have to a true collector. :KREMZEEK:



Please explain to me how energon Sharkticon resembles Triggerhappy...

Image

Which is which? They look like twins man.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 12:50 pm
by Skullcrunchberries
Rated X wrote:
Optimusfan79 wrote:These look awesome, we needed these just in case we don't see those other molds later on. I have energon Slugslinger & Sharkticon, with that I can use Sharkticon as Triggerhappy which he resembles a little then use Caliburst & Blowpipe for & I now have 2 Decepticon targetmasters down with one to go.

Again I have Cybertron Hotshot which I can use as Pointblank & Cybertron Defense Hotshot I can use as Crosshairs use Pinpointer & Peacemaker, two down & 1 to go.

So the way folks customize or if not, these are molds that can be used to represent the bot to use these guns properly. These are great ideas great concepts considering that hasbro/takara has been bsing, head sculpt body all look fine to me its a must have to a true collector. :KREMZEEK:



Please explain to me how energon Sharkticon resembles Triggerhappy...

Image


Seriously man, you must be blind. First off, they're both made of plastic, and probably have some metal screws in them too. Second off, they can both transform into things. And thirdly? They both have colors on them. I could go on but I wouldn't want to insult your intelligence. Besides, if that's not identical man, I don't know what is >:oP

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 1:40 pm
by Optimusfan79
Ok I said a little so key word "a little" my goodness. Now using my imagination or creativity that's y I also said can customize & the only spot where I see they can & do resemble is the face not the head the face. Lookin @ the cartoon face of Triggerhappy & the face of Sharkticon they do resemble & once again key word "a little" also in his alt form he has a lot of guns on him so imo having all those guns on him can kinda go along with the Triggerhappy theme/name. So for the so called smart people that pointed out they have the same plastic good call I see u learned a lot in school, & for the ones that said they do look exactly a like, ok if you say so :-B, & for the people that wanted to see what I see hope you can understand now.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 2:28 pm
by Rated X
Optimusfan79 wrote:Ok I said a little so key word "a little" my goodness. Now using my imagination or creativity that's y I also said can customize & the only spot where I see they can & do resemble is the face not the head the face. Lookin @ the cartoon face of Triggerhappy & the face of Sharkticon they do resemble & once again key word "a little" also in his alt form he has a lot of guns on him so imo having all those guns on him can kinda go along with the Triggerhappy theme/name. So for the so called smart people that pointed out they have the same plastic good call I see u learned a lot in school, & for the ones that said they do look exactly a like, ok if you say so :-B, & for the people that wanted to see what I see hope you can understand now.



I hope no offense was taken. I just posted a pic for comparison and asked for your "explanation" which you gave.

But I do have a sense of humor, and I must admit the additional sarcastic comments after mine were kind of funny.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 2:59 pm
by Optimusfan79
It's no offense takin, from u. Or the other people either I like going back & forth with sarcastic comments its all fun. Hope you get my explanation.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 3:11 pm
by Rated X
Optimusfan79 wrote:It's no offense takin, from u. Or the other people either I like going back & forth with sarcastic comments its all fun. Hope you get my explanation.



I could see the potential for a custom triggerhappy from the sharkticon mold but it would have to be a full repaint with wings added on to turn the boat into a jet.

As far as the boat mode as is, I kind of see potential for a Misfire repaint.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 5:33 pm
by Optimusfan79
Rated X wrote:
Optimusfan79 wrote:It's no offense takin, from u. Or the other people either I like going back & forth with sarcastic comments its all fun. Hope you get my explanation.



I could see the potential for a custom triggerhappy from the sharkticon mold but it would have to be a full repaint with wings added on to turn the boat into a jet.

As far as the boat mode as is, I kind of see potential for a Misfire repaint.


I thought he was a akward plane not a boat but either way your right. I gotta see if someone can customize mine. into at least that color scheme.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 8:52 pm
by Doctor McGrath
I really like target Masters but I can't get into these.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 9:07 pm
by waaaaghlord
Totally unrelated to the Targetmasters, but I promoted E Sharkticon to Classics status a while back. With no modification he makes an excellent IDW style Finback and looks great with the recent Pretender updates from the Generations line.

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 10:35 pm
by triKlops
interested in some of these and the previous grouping
anyone know $$$ ?

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Mon Jan 16, 2012 11:08 pm
by Rated X
Optimusfan79 wrote:
Rated X wrote:
Optimusfan79 wrote:It's no offense takin, from u. Or the other people either I like going back & forth with sarcastic comments its all fun. Hope you get my explanation.



I could see the potential for a custom triggerhappy from the sharkticon mold but it would have to be a full repaint with wings added on to turn the boat into a jet.

As far as the boat mode as is, I kind of see potential for a Misfire repaint.


I thought he was a akward plane not a boat but either way your right. I gotta see if someone can customize mine. into at least that color scheme.


Misfire was an awkward plane, but his lack of wingspan makes him almost boat like. And now Takara is repainting the sharkticon mold as some kind of autobot "ark".

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Thu Jan 19, 2012 5:57 pm
by El Duque
Online retailer Captured Prey has listed a pre-order for MasterShooter Collectible's first wave of Shooter Masters, which includes:

  • Bolt Action, "The Hot Steel Rod"
  • BrOOMstick, "The Sweeper"
  • Minute Bot, "The Quick Shot"
  • Shot Piece, "The Old Timer"

Image

MasterShooter is back with their second product, dubbed the Shooter Masters! These figures are the perfect complement to your Classics collection, and would fit perfectly when displayed with Scourge, Kup, Hot Rod, and Blurr! Designed to evoke a certain collection of classic companion figures, the Shooter Masters transform from gun to robot and are colored to fit their inspirations. Each Shooter Master figure has a stepped handle, capable of fitting any figure with a 4mm or 5mm peg hole, and each also includes a 3mm clip adapter, making them compatible with any figure that uses the clip system to mount weapons!

  • 9 points of ball-jointed articulation! Neck, shoulders, elbows, hips, and knees!
  • Perfect as replacement weapons for Targetmaster figures that who have lost their companions!
  • 4mm or 5mm peg-hole compatible, works with almost every official Transformers figure!
  • 3mm clip weapon system compatible, with included adapters, for even more compatibility with modern figures!
  • Includes an additional adapter to convert any 5mm peg, 5mm peg hole, or Mini-Con port to a 3mm clip system point!


In addition Captured Prey has listed pre-orders for two sets of store exclusive Shooter Masters based on the G1 Double Targetmasters for Spinister and Quake. You may remember the list of rumored BotCon exclusive figures included a Spinister repaint of HFTD Deluxe Tomahawk that these guys might work well with.

  • Nit-Picker, "The Splitter of Hairs"
  • Firebrand, "The Steel That Singes"

Image

  • Pinnacle, "The Tip-Top Target Tracker"
  • Firebox, "The Heiney Heater"

Image

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Thu Jan 19, 2012 6:14 pm
by Bumblevivisector
Any idea if these 4 new guys can combine? Cuz Tiptop and Heater were the second pair of Targetmaster guns I ever owned, so if they don't, that'll be very wrong.

Of course, I also don't have any CHUGUR figures they'd logically go to, since despite what Reprolabels says, the leftovers from the Bruticus Maximus rerelease do not look that much like Spinister or Quake.

Will I still get these regardless? Well...yeah...

Re: Upcoming MasterShooter Collectibles TargetMasters

PostPosted: Thu Jan 19, 2012 7:10 pm
by Optimusfan79
I figured out who can be used to be Misfire the burgandy cybertron Starscream that came in that 2-pack with Vector Prime. He resembles him enough to play that roll.



Rated X wrote:
Optimusfan79 wrote:
Rated X wrote:
Optimusfan79 wrote:It's no offense takin, from u. Or the other people either I like going back & forth with sarcastic comments its all fun. Hope you get my explanation.



I could see the potential for a custom triggerhappy from the sharkticon mold but it would have to be a full repaint with wings added on to turn the boat into a jet.

As far as the boat mode as is, I kind of see potential for a Misfire repaint.


I thought he was a akward plane not a boat but either way your right. I gotta see if someone can customize mine. into at least that color scheme.


Misfire was an awkward plane, but his lack of wingspan makes him almost boat like. And now Takara is repainting the sharkticon mold as some kind of autobot "ark".