In addition, it would be a good idea if everyone read the FAQ's again. When registration does go online, be careful as to what you pick so that mistakes wont' be made. If your registration goes to incomplete, it could take a couple of days before we get to your particular issue.
Thanks for your support,
You can check out our on going coverage of Clench here.
Pete@BotCon has posted this gem over in the Club Forums. To help get the fandom pumped for the "G2 Redux" theme of this year's set, FunPub gives us a BotCon 2010 commercial featuring the a redux of the cgi from the Generation 2 toy commercials and tv series opener.
Keep your optics glued to Seibertron.com for up to the minute coverage of BotCon 2010.
As Botcon 2010 comes closer we see more and more of what will be there. New images have surfaced off Chinese auction site Taobao of the possible Botcon Sharkticon figure we reported on here. The new images are larger and provide a properly transformed alternate mode. To view the source click here.
I just received this email from Brian at Fun Publications:
Brian Savage wrote:
Just to keep you updated. Registration won't happen today. I'll keep sending out updates every day this this week.
However, there is one question I need to address with everyone.
Can I purchase a Primus package and convert it later to an Iacon package?
No. Because we are not allowing Iacon (non-attending packages) to be ordered until a week after the attending packages are available, there are some people who think this is a work around our system.
Anyone who orders an attending (Primus) and wants to convert it later will lose their package as we will refund their money minus a $25 cancellation fee and we will put the package back into inventory. In addition, the online service fee is non-refundable.
This will also be the policy if you no-show at BotCon.
Do not order a Primus package and try to skirt the system we have put in place. We are holding a certain number of Iacon packages (non-attending) in reserve.
In addition, to make the "first 100 fair" we are having 50 more of the pins made for the non-attending people, so this year, there will be 150 "first 100" pins.
I hope that everyone understands why we have to do this as trying to work around the system in place will only cause more problems for everyone.
Thanks for your support,
PS. The Swan and Dolphin Hotel are now sold out! We are trying to determine if there is enough demand left to set up another block at a different hotel. If you are in need of this, please call our office so we can keep a count.
The Transformers Collector's Club just sent out the following exciting BotCon update to their members via e-mail.
Here is the latest on BotCon guests:
HASBRO REVEALS TRANSFORMERS HALL OF FAME’S INAUGURAL MEMBERS
TRANSFORMERS Fans May Participate in Selecting One Additional Robot
to Join Hall of Fame’s 2010 Class
Pawtucket, R.I. (May 10, 2010) — After more than 25 years of “MORE THAN MEETS THE EYE” action, Hasbro, Inc. (NYSE: HAS) is launching the TRANSFORMERS Hall of Fame that will honor those influential in creating and building this iconic entertainment brand as well as actual “ROBOTS IN DISGUISE.”
In 2010, Hasbro will induct four individuals into the TRANSFORMERS Hall of Fame who helped shape the global entertainment brand that has spawned popular action figures, comic book series, multiple animated series, video games and two blockbuster live action movies. The inductees include:
Bob Budiansky: While working as an editor for Marvel Comics in 1983, Mr. Budiansky named and wrote the personality profiles for most of the first 20 or so TRANSFORMERS characters. He then became the editor of the very first TRANSFORMERS mini-series, which led to his scripting most of the next 50 issues of the monthly TRANSFORMERS comic book. As he continued working with the brand on behalf of Hasbro, he named and wrote the packaging copy and personality profiles of dozens more TRANSFORMERS, and developed story treatments as new lines of TRANSFORMERS were introduced.
Peter Cullen: Mr. Cullen is a voice actor best known for providing the English voice for the wise and heroic AUTOBOT leader OPTIMUS PRIME in the popular 1980s cartoon series “The TRANSFORMERS” and in the 1986 animated film “The TRANSFORMERS: The Movie”. He reprised the role again in 2007 and 2009 in the live action TRANSFORMERS movies, and will return for the third installment slated for 2011. Additionally, he has provided the voice of five other TRANSFORMERS robots during his career.
Yoke Hideaki: While working at TAKARA TOMY, Mr. Hideaki invented the Micro-Robot segment within the MICRONAUTS toy line, which featured the engineering innovation of transformation in action figures that were no more than 3 to 4 inches tall. TRANSFORMERS characters MEGATRON, SOUNDWAVE and RAVAGE can trace their origins to Mr. Hideaki’s efforts. He acted as liaison between TAKARA TOMY and Hasbro during the early years of their business relationship.
Kojin Ohno: Mr. Ohno started his career at TAKARA TOMY, working on the design of the Microman and Diaclone toy lines, which would later become one of the inspirations for the TRANSFORMERS toy line. Mr. Ohno created SUNSTREAKER, which is considered the first “car to robot transforming toy”. He was also instrumental in the introduction of Beast Wars TRANSFORMERS for the Japanese market. He helped design toys for both live action TRANSFORMERS movies. He takes great pride in being the person who designed the largest TRANSFORMERS toy from Generation 1: FORTRESS MAXIMUS.
Budiansky, Cullen, Hideaki and Ohno will all attend the 2010 TRANSFORMERS convention (known as BotCon) in Orlando, FL and will be officially inducted into the TRANSFORMERS Hall of Fame during the festivities on Saturday night, June 26, 2010.
Hasbro will also induct five iconic characters into the TRANSFORMERS Hall of Fame. Heroic AUTOBOTS OPTIMUS PRIME and BUMBLEBEE, as well as evil DECEPTICONS MEGATRON and STARSCREAM, will be in the first class of robots honored with admission as chosen by Hasbro’s TRANSFORMERS Hall of Fame internal panel of judges.
In addition, TRANSFORMERS fans around the world may visit transformers.com starting today and cast their online vote to select a fifth robot to join the inaugural class.
The ballot of finalists was created with input from several TRANSFORMERS collector fan media sites, which conducted their own online polling to ensure the ballot represented the robots that most resonate with fans. The ballot features SOUNDWAVE, GRIMLOCK, DINOBOT, SHOCKWAVE and JAZZ. Fans may cast votes daily from now until May 28. The winning robot will be revealed at the Hall of Fame induction ceremony at BotCon on June 26, 2010.
First introduced in 1984 by Hasbro and Takara as a toy line, the TRANSFORMERS brand
has provided kids with hours of MORE THAN MEETS THE EYE fun with their action figures that convert from robot to vehicles and back again. Legions of boys around the world grew up creating fantastic adventures and battles set on both the planet CYBERTRON and Earth that featured the “good-guy” AUTOBOTS and the “bad-guy” DECEPTICONS. Since then, more than 7500 robots have been introduced, with five receiving the distinction of being in the first TRANSFORMERS Hall of Fame class.
For more information on BotCon and everything else Transformers related, always trust Seibertron.com, the ultimate Transformers resource!
The website for Toronto-based convention Tfcon 2010 has posted information on registering and has revealed that the exclusive Nightbird figure (previewed here) will be limited to only 1000 pieces.
Tfcon 2010 wrote:Advance registration is not required to attend TFcon 2010, you can purchase tickets at the door. However, if you wish to reserve the TFcon 2010 exclusive Night-bird (limited to 1000 pieces), you should pre-register.
TFcon 2010 admission includes the following:
-Entrance to Canada's Largest Dealer Room for Transformers Merchandise
-Admission to all the TFcon panels and events
-Free autographs from some TFcon Guests
-A free Transformers comic book (while supplies last)
-Entrance into the hourly door prizes
The original website with all the information on registration can be found here.
Thanks go to Seibertron member Aernaroth for emailing us about this update.
Stick to Seibertron.com for all the latest in convention news!
Pete@BotCon has revealed some new information about both the First 100 pins and the registration process.
Pete@BotCon wrote:There will be a set amount of non-attending packages set aside for when that part of registration begins.
We are making an additional 50 "first 100 pins" for the non-attending packages. So now it is a first 150.
The price of the online registration will drop next year. Once the cost of the system has been covered we will charge a maintenance fee that will, again, be much less.
Another reason we are holding off on the printable forms is because there is no easy way to reconcile those forms with forms that are faxed. Online forms take priority when it comes to classes, tours, first 150 and so on.
The information can also be seen here at The Allspark.
Stick with Seibertron.com for all the latest in convention news!
In order to comply with the FTC's endorsement guidelines, we hereby inform this site's viewers that we occasionally receive sample products, content, or other forms of media from various companies in order for us to provide content of interest to our readers. Some of the content on this site are sponsored posts for which we have been compensated. Some of the links to external sites posted on this site may automatically be converted to an affiliate link for which we may be compensated.
18,140 pages were recently viewed by 953 unique visitors. This page loaded in 0.11706 seconds and was viewed 1 times on Tuesday, June 28th 2016 10:30am CDT