Carnivius_Prime wrote:Kurona wrote:william-james88 wrote:Kurona wrote:william-james88 wrote:good news then, we get an extra gun!
And it could go... some way to ease people into paying this much for him. I mean it's not a LOT, but it's still something.
Thats just cause for some reason your voyagers are reasonably priced in the UK (unlike your leaders and deluxes).
Not really. The Voyagers seem to be suffering a price hike; a lot of places I've seen them go for between £26 and £30
Forbidden Planet tends to overprice things and sells Voyagers between £25 and £30
Toys R Us has Voyagers at £24.99 but let me have Galvatron for £22.99 cos of a shelf label mix up.
Cobotron wrote:NICE!Burn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJThis seems to be the case with a lot of TR molds. The Astrotrain/Sentinel mold's neck socket seems to be assembled backwards across the board. Forcing you to have to turn the TM's head 180.Stuartmaximus wrote:Well there's been a couple of TR Leaders spotted in TK Maxx!(Blaster & PMOP) for around the £25 mark.....& they seem to be Euro stock, so....maybe not everywhere's so pricey
Emerje wrote:Pre-orderd Lio Convoy from AmiAmi. Their listing confirms that he does indeed come with three weapons.
Emerje
Stuartmaximus wrote:Cobotron wrote:NICE!Burn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJThis seems to be the case with a lot of TR molds. The Astrotrain/Sentinel mold's neck socket seems to be assembled backwards across the board. Forcing you to have to turn the TM's head 180.Stuartmaximus wrote:Well there's been a couple of TR Leaders spotted in TK Maxx!(Blaster & PMOP) for around the £25 mark.....& they seem to be Euro stock, so....maybe not everywhere's so pricey
Eh?
shouldn't you have quoted Fenrir there
fenrir72 wrote:@ WJ88, does your Hb Blaster have the same issue?
william-james88 wrote:fenrir72 wrote:@ WJ88, does your Hb Blaster have the same issue?
He fits tight nomatter which way the TM ehad is turned.
fenrir72 wrote:Stuartmaximus wrote:Cobotron wrote:NICE!Burn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJThis seems to be the case with a lot of TR molds. The Astrotrain/Sentinel mold's neck socket seems to be assembled backwards across the board. Forcing you to have to turn the TM's head 180.Stuartmaximus wrote:Well there's been a couple of TR Leaders spotted in TK Maxx!(Blaster & PMOP) for around the £25 mark.....& they seem to be Euro stock, so....maybe not everywhere's so pricey
Eh?
shouldn't you have quoted Fenrir there
The clip isn't misassembled. You can tell by the groove on both sides of the Hm/Tm head aka neck peg.
In my Broadcast case, it seems plastic isn't too tout plus the groove in Twincast's neck is a bit short. so it makes the head pop out
@ WJ88, does your Hb Blaster have the same issue?
william-james88 wrote:Also be weary of hope in this hobby. Hope is just undiscovered disappointment.
Agamemnon, barebacked rider of flying robo-dragon, and not often constipated either...My nephew wrote:Bacon is meat candy.
Oh. Sorry Ag. I thought we had determined it was both Sentinels. D-Maximus had the same problem (or something similar) with his new Astrotrain.Agamemnon wrote:fenrir72 wrote:Stuartmaximus wrote:Cobotron wrote:NICE!Burn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJThis seems to be the case with a lot of TR molds. The Astrotrain/Sentinel mold's neck socket seems to be assembled backwards across the board. Forcing you to have to turn the TM's head 180.Stuartmaximus wrote:Well there's been a couple of TR Leaders spotted in TK Maxx!(Blaster & PMOP) for around the £25 mark.....& they seem to be Euro stock, so....maybe not everywhere's so pricey
Eh?
shouldn't you have quoted Fenrir there
The clip isn't misassembled. You can tell by the groove on both sides of the Hm/Tm head aka neck peg.
In my Broadcast case, it seems plastic isn't too tout plus the groove in Twincast's neck is a bit short. so it makes the head pop out
@ WJ88, does your Hb Blaster have the same issue?
I just checked. Only my SDCC Sentinel seems to have the Titan Master socket assembled backward. My HB Astrotrain, HB Sentinel, and HB Blaster all have the correct socket assembly orientation.
Are other people seeing mis-assemblies in the socket in other figures or other iterations of the Astrotrain mold?
Burn wrote:Agamemnon wrote:Let's get back to talking about Burn's mammoth snout flopping...
Well I am Australian. It's kinda what we're known for.
Cobotron wrote:Oh. Sorry Ag. I thought we had determined it was both Sentinels. D-Maximus had the same problem (or something similar) with his new Astrotrain.Agamemnon wrote:fenrir72 wrote:Stuartmaximus wrote:Cobotron wrote:NICE!Burn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJThis seems to be the case with a lot of TR molds. The Astrotrain/Sentinel mold's neck socket seems to be assembled backwards across the board. Forcing you to have to turn the TM's head 180.Stuartmaximus wrote:Well there's been a couple of TR Leaders spotted in TK Maxx!(Blaster & PMOP) for around the £25 mark.....& they seem to be Euro stock, so....maybe not everywhere's so pricey
Eh?
shouldn't you have quoted Fenrir there
The clip isn't misassembled. You can tell by the groove on both sides of the Hm/Tm head aka neck peg.
In my Broadcast case, it seems plastic isn't too tout plus the groove in Twincast's neck is a bit short. so it makes the head pop out
@ WJ88, does your Hb Blaster have the same issue?
I just checked. Only my SDCC Sentinel seems to have the Titan Master socket assembled backward. My HB Astrotrain, HB Sentinel, and HB Blaster all have the correct socket assembly orientation.
Are other people seeing mis-assemblies in the socket in other figures or other iterations of the Astrotrain mold?
And Fen. My Hb Blaster's head works just fine too.
Agamemnon wrote:fenrir72 wrote:Stuartmaximus wrote:Cobotron wrote:NICE!Burn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJThis seems to be the case with a lot of TR molds. The Astrotrain/Sentinel mold's neck socket seems to be assembled backwards across the board. Forcing you to have to turn the TM's head 180.Stuartmaximus wrote:Well there's been a couple of TR Leaders spotted in TK Maxx!(Blaster & PMOP) for around the £25 mark.....& they seem to be Euro stock, so....maybe not everywhere's so pricey
Eh?
shouldn't you have quoted Fenrir there
The clip isn't misassembled. You can tell by the groove on both sides of the Hm/Tm head aka neck peg.
In my Broadcast case, it seems plastic isn't too tout plus the groove in Twincast's neck is a bit short. so it makes the head pop out
@ WJ88, does your Hb Blaster have the same issue?
I just checked. Only my SDCC Sentinel seems to have the Titan Master socket assembled backward. My HB Astrotrain, HB Sentinel, and HB Blaster all have the correct socket assembly orientation.
Are other people seeing mis-assemblies in the socket in other figures or other iterations of the Astrotrain mold?
william-james88 wrote:If ever Sabrblade decides to go on vacation, I am glad to know we can rely on you.
Third... there is just something about that decoHellscream9999 wrote:Cobotron wrote:I did it. I just did it.
I love this mold. And all that gold!
Whew!
It's okay Cobro, just breath. And, always remember, I pre-ordered it, if I can go in on it, you certainly can - and likely should
I just knew from the moment it was revealed that I would regret missing him far too much
Same, A3 didn't do it for me, but as Leo - pre-orderedBurn wrote:As Alpha Trion, I had no interest in this mold.
As Leo Prime, he's now pre-ordered through HLJ
I agree that the head looks fine as prime. I like how it looks all painted blue and with the ruffles has ridges mouth plate.Hellscream9999 wrote:plus he really pulls off the 'prime' look nicely while not being a traditional prime.
william-james88 wrote: (though there would be no duty fees at this point since he is below £60) but thats just the extra cost to import anything.
Bumblebee21 wrote:fenrir72 wrote:
Hey Logan. Could you check your TL Broadcast if Twincast's heads needs to be twisted 180 degree backwards before joining the transtector body?
I had to do the 180 because the head keeps on popping out.
hasbro blaster can go either way. if you dont rotate it it sits in tighter. if you do rotate it and lift the mask up the head comes with the mask.
Shadowman wrote:This is Sabrblade we're talking about. His ability to store trivial information about TV shows is downright superhuman.
Caelus wrote:My wife pointed out something interesting about the prehistoric Predacons. I said that everyone was complaining because transforming for them mostly consisted of them just standing up-right. She essentially said, 'So? That's what our ancestors did.'
Kurona wrote:So... where's that gun from? Have we seen it before? It's certainly not one of the Titan Master guns.
william-james88 wrote:If ever Sabrblade decides to go on vacation, I am glad to know we can rely on you.
You didn't believe me the first time, huh K?Hellscream9999 wrote:Kurona wrote:So... where's that gun from? Have we seen it before? It's certainly not one of the Titan Master guns.
It's sentinels being held upside-down
Burn wrote:Agamemnon wrote:Let's get back to talking about Burn's mammoth snout flopping...
Well I am Australian. It's kinda what we're known for.
Return to Transformers Toys Discussion
Registered users: Bing [Bot], DeathReviews, Dr. Caelus, Google [Bot], Google Adsense [Bot], Google Feedfetcher, Majestic-12 [Bot], Mechastrike, MSN [Bot], TF-fan kev777, Yahoo [Bot]