Page 40 of 57

Re: The Official Part(s) Identification Topic

PostPosted: Tue Jan 10, 2017 5:08 am
by Carnivius_Prime
JelZe GoldRabbit wrote:
Unless I'm really mistaken, that's a part to a part of the Lion Mechazord from Power Rangers Megaforce. It's a fold-out panel to the back piece, which folds around the hips of the combined Gosei Great Grand Megazord.




Got given a lot of stuff from the charity shop to sort out and sell for them this week... and it includes more parts of that Mechazord and others in that line. Still not complete but getting there. :P

Also found the crossbow in there of the Beast Hunters Bumblebee I bought from there last week. So that's mine. :P

Re: The Official Part(s) Identification Topic

PostPosted: Tue Jan 10, 2017 10:19 pm
by william-james88
Does anyone know what this pink tank is?

Image

Re: The Official Part(s) Identification Topic

PostPosted: Tue Jan 10, 2017 10:55 pm
by Sabrblade
Never seen it before.

Re: The Official Part(s) Identification Topic

PostPosted: Wed Jan 11, 2017 6:11 pm
by ScottyP
I had one of those as a kid but in different colors. Couldn't name it for you on my best day, but I can tell you it was from a discount chain and connected with a few similarly sized modules to make a, idk, crappy moon train or something. It's only worth is in whatever fun you might eke from it.

Re: The Official Part(s) Identification Topic

PostPosted: Mon Feb 06, 2017 11:45 am
by Sjeng
What series are these from?

Image

and are they any good? what would you pay for them?

Re: The Official Part(s) Identification Topic

PostPosted: Mon Feb 06, 2017 11:52 am
by Sabrblade
Well, the artwork is from Armada, but the logo is from G1, and the use of "The Original Series" would suggest that they're G1 DVDs, but no official G1 DVD releases used Armada artwork on their covers. They might be bootlegs.

Re: The Official Part(s) Identification Topic

PostPosted: Mon Feb 06, 2017 11:57 am
by ArmadaPrime
Those are DVDs of transformers Armada from around 2002 (though not a set of DVDs I recognise), a somewhat notorious series in terms of production quality but with some reasonable plots. Not exactly pushing the boundaries of entertainment but pretty fun- though seemingly being earlier episodes, they'll probably be quite human-centric and the humans are... an acquired taste.

I'd recommend it (though not if you're paying top dollar), but as the name suggests I'm a little biased ;)

EDIT: As Sabr rightly points out, there are actually quite a few red flags that they're probably bootlegs. I'd be half tempted to get them and see what episodes they are out of curiosity if they're on the cheap, but that's just me being nosy having a healthy curiosity for life :lol:

Re: The Official Part(s) Identification Topic

PostPosted: Mon Feb 06, 2017 1:20 pm
by william-james88
I wouldnt pay anything for those.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Feb 07, 2017 2:26 am
by Emerje
Sjeng wrote:What series are these from?


The original series. >:oP






Sorry, that was too easy. :lol: They're bootlegs for sure, they aren't worth anything.

Emerje

Re: The Official Part(s) Identification Topic

PostPosted: Tue Feb 07, 2017 4:36 am
by -Kanrabat-
This is the only kind of "bootlegs" that matter and are actually worth it:

Image

Re: The Official Part(s) Identification Topic

PostPosted: Tue Feb 07, 2017 1:48 pm
by Jelze Bunnycat
I'd hold off on the "bootleg" claim guys, until we see the back of the cases. If anything, it's just a re-release done via a cheap distributor.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Feb 07, 2017 4:13 pm
by william-james88
JelZe GoldRabbit wrote:I'd hold off on the "bootleg" claim guys, until we see the back of the cases. If anything, it's just a re-release done via a cheap distributor.

Doesnt change the fact that these arent worth much regardless.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Feb 07, 2017 4:24 pm
by Overcracker
JelZe GoldRabbit wrote:I'd hold off on the "bootleg" claim guys, until we see the back of the cases. If anything, it's just a re-release done via a cheap distributor.


Nah, there's no reason even a cheap distributor would not have access to the appropriate Armada logo if they have access to correct character art. Or be using Armada character Art for G1. There's tons of G1 character art to choose from more so if its a licensed release.

10 to 1 these are bootlegs of G1 with Armada Character art for some reason.

Re: The Official Part(s) Identification Topic

PostPosted: Tue Feb 07, 2017 5:49 pm
by Emerje
JelZe GoldRabbit wrote:I'd hold off on the "bootleg" claim guys, until we see the back of the cases. If anything, it's just a re-release done via a cheap distributor.

A re-release wouldn't be done by a cheap distributer unless it's a bootleg. All of the major markets have a company with the license to produce these that know what they're doing. Even those crappy collected DVDs for G1 and the Unicron Trilogy back in the late '90s and mid '00s were done by Rhino and Paramount. Any market that would produce something this poor isn't too likely to be doing it legally.

Emerje

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 01, 2017 11:50 am
by william-james88
Which part is this

Image

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 01, 2017 2:31 pm
by Jelze Bunnycat
That's a part for the Micromaster Skyhopper helicopter base.

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 01, 2017 6:00 pm
by Overcracker
william-james88 wrote:Which part is this

Image


Jelze is of course correct.

Ahh Skyhopper. One of my favorite Micromasters as a kid along with Ground Shaker.

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 2:14 pm
by william-james88
whos the bike and the plane?

Image

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 3:54 pm
by Emerje
The bike goes with Action Master Axer, the plane is Predator Snare.

Emerje

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 4:23 pm
by -Kanrabat-
I'm pretty sure this thing is not a transformers. But I'm really curious what the hell that thing is. The seller want 30$CAN for it and I think it's WAY too much money for that UFO.

Image

Image

So, my TF wizards, who the fok is this guy?

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 4:31 pm
by ArmadaPrime
-Kanrabat- wrote:I'm pretty sure this thing is not a transformers.

He's legit! That's Sizzle, one of the G2 Laser Rods- though a little mistransformed, he seems to be kneeling down.
The laser rods had a gimmick wherein there was an LED that could light up either their engine blocks or their fists (to glow through a clear plastic sword)- whether or not that gimmick is intact will probably affect the toy's value quite a bit. Can't say I know whether he'd be worth the price though!

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 4:41 pm
by -Kanrabat-
ArmadaPrime wrote:
-Kanrabat- wrote:I'm pretty sure this thing is not a transformers.

He's legit! That's Sizzle, one of the G2 Laser Rods- though a little mistransformed, he seems to be kneeling down.
The laser rods had a gimmick wherein there was an LED that could light up either their engine blocks or their fists (to glow through a clear plastic sword)- whether or not that gimmick is intact will probably affect the toy's value quite a bit. Can't say I know whether he'd be worth the price though!


So IT IS!
Very interesting. Jeezz, the incompetence of people trying to transform things....
So, it's clear it does not have the sword.
I'll offer 15$CAN because of that and I'll see if he bite. Because it's around 15$CAN plus 15$CAN for shipping from the UK.

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 8:38 pm
by Jelze Bunnycat
-Kanrabat- wrote:
ArmadaPrime wrote:
-Kanrabat- wrote:I'm pretty sure this thing is not a transformers.

He's legit! That's Sizzle, one of the G2 Laser Rods- though a little mistransformed, he seems to be kneeling down.
The laser rods had a gimmick wherein there was an LED that could light up either their engine blocks or their fists (to glow through a clear plastic sword)- whether or not that gimmick is intact will probably affect the toy's value quite a bit. Can't say I know whether he'd be worth the price though!


So IT IS!
Very interesting. Jeezz, the incompetence of people trying to transform things....
So, it's clear it does not have the sword.
I'll offer 15$CAN because of that and I'll see if he bite. Because it's around 15$CAN plus 15$CAN for shipping from the UK.


A word of warning though: in addition to the LED the Laser Rods have the same waist gimmick with the rubber band as G.I. Joe figures. I'm pretty sure you know where I'm going with this.

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 8:41 pm
by -Kanrabat-
JelZe GoldRabbit wrote:A word of warning though: in addition to the LED the Laser Rods have the same waist gimmick with the rubber band as G.I. Joe figures. I'm pretty sure you know where I'm going with this.


WHAT?

Make the thing in gold and clear plastics while we're at it!
Sigh... Even at 15$, it won't be worth the trouble.

Thanks for the warning.

Re: The Official Part(s) Identification Topic

PostPosted: Wed Mar 08, 2017 8:46 pm
by william-james88
Kanrabat, that thing's been on Kijiji for years, I have stayed away. The price is nonsense and I didnt think it was worth the trouble of writing in and trying to get it for a decent amount (like 5-10$) .