This page contains affiliate links. We may earn commissions when readers interact with or purchase items through these links. For more information, see our affiliate disclosures here.

Tips and tricks

Post all your customized Transformers here. Whether it's a small mod or a true kitbash, we'd love to see it!

Tips and tricks

Postby Dead Metal » Sat Jul 25, 2009 9:26 am

Motto: "Don't do drugs, beer's cheaper anyway!"
Please use this thread for posting tips and tricks for repainting or painting Transformers toys in general. Anything you think might be helpful for others can go in here.
Or ask for tips and tricks on what you want to create if it hasn't been posted in this thread.
Image


Jeep! wrote:Why do I imagine Dead Metal sounding exactly like Arnie?
Intah-wib-buls?

Blurrz wrote:10/10

Leave it to Dead Metal to have the word 'Pronz' in his signature.
User avatar
Dead Metal
God Of Transformers
Posts: 13899
News Credits: 767
Joined: Tue May 01, 2007 5:18 am

Tips and Tricks

Postby Dead Metal » Sat Jul 25, 2009 9:29 am

Motto: "Don't do drugs, beer's cheaper anyway!"
Got tips or tricks for kitbashing Transformers?
then post them here anything you think might be helpful can go in here or request for a tip if you're stuck on a project!
Image


Jeep! wrote:Why do I imagine Dead Metal sounding exactly like Arnie?
Intah-wib-buls?

Blurrz wrote:10/10

Leave it to Dead Metal to have the word 'Pronz' in his signature.
User avatar
Dead Metal
God Of Transformers
Posts: 13899
News Credits: 767
Joined: Tue May 01, 2007 5:18 am

Re: Tips and Tricks

Postby Doubledealer93 » Sat Jul 25, 2009 5:44 pm

Motto: "A logical mind is a healthy mind."
Weapon: Double-Barreled, Armor-Piercing Particle Beam Cann...
i think its more of a tip :
movie megatron hands and fingers
i found that ROTF wheelie fingers work well for his hands
ROTF scalpel legs
and the fingers that are on the figure already ,just move em around.
and a little tip for ROTF prime fix, the little pegs that go into his chest get stress marks very easily and will break just as easily, so i found a fix that will do the trick.
drill holes in to where the pegs go towards the top of the little compartment
here are some pics, and please forgive any unclearness.
Image

Image

Image
Image

check out my collection thread, updated 2/25/13, and i kinda lost count, i have to count them again....
doubledealer93-s-collection-as-of-2-25-13-t84309.php
my tumblr: https://www.tumblr.com/blog/doubledealer93
My deviant art, loads more pics there--> http://doubledealer93.deviantart.com/
User avatar
Doubledealer93
City Commander
Posts: 3616
Joined: Sun May 04, 2008 3:19 pm
Location: Ohio
Strength: 10+
Intelligence: 10+
Speed: 4
Endurance: 10+
Rank: 10+
Courage: 5
Firepower: 1
Skill: ???

Re: Tips and tricks

Postby LiKwid » Sun Jul 26, 2009 10:01 pm

Motto: "When In doubt..Invert polarities!!!!"
Weapon: V-Lock Rifle, V-Lock Cannon
One thing I have found that helps alot is washing the figure before you start painting .. Getting dust and joint lubrication off a figure can be a huge help when doing a full paint job..
Counterpunch wrote:FP sure does provide some F'd up head.

Sell me your Beast wars stuff!!!!
Transformers Earth wars-SiNxBruticus
User avatar
LiKwid
Gestalt
Posts: 2103
News Credits: 8
Joined: Sun Jul 22, 2007 7:01 pm
Location: San Antonio Tx
Buy from LiKwid on eBay
Strength: 8
Intelligence: 9
Speed: 5
Endurance: 10
Rank: 10+
Courage: 10
Firepower: 6
Skill: 10

Re: Tips and tricks

Postby Doubledealer93 » Sun Jul 26, 2009 11:20 pm

Motto: "A logical mind is a healthy mind."
Weapon: Double-Barreled, Armor-Piercing Particle Beam Cann...
LiKwid wrote:One thing I have found that helps alot is washing the figure before you start painting .. Getting dust and joint lubrication off a figure can be a huge help when doing a full paint job..


i heard that rubbing alcohol works well with this and for a paint remover.
Image

check out my collection thread, updated 2/25/13, and i kinda lost count, i have to count them again....
doubledealer93-s-collection-as-of-2-25-13-t84309.php
my tumblr: https://www.tumblr.com/blog/doubledealer93
My deviant art, loads more pics there--> http://doubledealer93.deviantart.com/
User avatar
Doubledealer93
City Commander
Posts: 3616
Joined: Sun May 04, 2008 3:19 pm
Location: Ohio
Strength: 10+
Intelligence: 10+
Speed: 4
Endurance: 10+
Rank: 10+
Courage: 5
Firepower: 1
Skill: ???

Re: Tips and tricks

Postby Gutter Bunny » Mon Jul 27, 2009 10:18 am

Doubledealer25 wrote:
LiKwid wrote:One thing I have found that helps alot is washing the figure before you start painting .. Getting dust and joint lubrication off a figure can be a huge help when doing a full paint job..


i heard that rubbing alcohol works well with this and for a paint remover.


all you really need is soap and water for an initial wash.

alcohol can strip a factory paint job for you

castrol super clean can strip a botched repaint(i'm looking @ you ravage!)

I imagine you could use brake fluid for this also, but i'd be afraid it would warp the plastic...
Image
Gutter Bunny
Brainmaster
Posts: 1325
Joined: Fri Dec 22, 2006 1:56 am
Location: The last place you look...

Re: Tips and tricks

Postby Skyfire77 » Mon Jul 27, 2009 7:59 pm

Motto: "Science can't move forward without heaps!"
Weapon: Particle Beam Cannon
Yeah, brake fluid would be going overboard. I've never needed anything stronger than enamel paint thinner and a little elbow grease to get off paint and old stickers.

Mind you, thinner didn't help on the vinyl parts of my 2007 toys (Lil' Scorpy is still sticky almost a year later!), but I'll figure out something...
Image
User avatar
Skyfire77
Headmaster
Posts: 1127
News Credits: 2
Joined: Wed Jul 08, 2009 3:03 pm
Location: Bethel Park, PA
Strength: 8
Intelligence: 10+
Speed: 10
Endurance: 6
Rank: 7
Courage: 8
Firepower: 8
Skill: 10

Re: Tips and tricks

Postby Doubledealer93 » Sat Aug 01, 2009 1:28 pm

Motto: "A logical mind is a healthy mind."
Weapon: Double-Barreled, Armor-Piercing Particle Beam Cann...
what works for removing acrylic paint?
Image

check out my collection thread, updated 2/25/13, and i kinda lost count, i have to count them again....
doubledealer93-s-collection-as-of-2-25-13-t84309.php
my tumblr: https://www.tumblr.com/blog/doubledealer93
My deviant art, loads more pics there--> http://doubledealer93.deviantart.com/
User avatar
Doubledealer93
City Commander
Posts: 3616
Joined: Sun May 04, 2008 3:19 pm
Location: Ohio
Strength: 10+
Intelligence: 10+
Speed: 4
Endurance: 10+
Rank: 10+
Courage: 5
Firepower: 1
Skill: ???

Re: Tips and tricks

Postby Gutter Bunny » Sat Aug 01, 2009 8:18 pm

Doubledealer25 wrote:what works for removing acrylic paint?


are you wanting to strip the entire figure or just parts of it?

as described above: if you soak(overnight) the figure in castrol superclean you can then scrub off the offending paint-job with a toothbrush.

90% and 70% isopropyl alcohol and q-tips can strip a factory paint job so i would imagine it could take off the acryl as well. I'd certainly recommend trying it in an inconspicuous area first.
Image
Gutter Bunny
Brainmaster
Posts: 1325
Joined: Fri Dec 22, 2006 1:56 am
Location: The last place you look...

Re: Tips and tricks

Postby Doubledealer93 » Sat Aug 01, 2009 8:56 pm

Motto: "A logical mind is a healthy mind."
Weapon: Double-Barreled, Armor-Piercing Particle Beam Cann...
well when i went to a hobby lobby store it had acrylic paint remover. will it harm the plastic?
Image

check out my collection thread, updated 2/25/13, and i kinda lost count, i have to count them again....
doubledealer93-s-collection-as-of-2-25-13-t84309.php
my tumblr: https://www.tumblr.com/blog/doubledealer93
My deviant art, loads more pics there--> http://doubledealer93.deviantart.com/
User avatar
Doubledealer93
City Commander
Posts: 3616
Joined: Sun May 04, 2008 3:19 pm
Location: Ohio
Strength: 10+
Intelligence: 10+
Speed: 4
Endurance: 10+
Rank: 10+
Courage: 5
Firepower: 1
Skill: ???

Re: Tips and tricks

Postby Skyfire77 » Sat Aug 01, 2009 9:54 pm

Motto: "Science can't move forward without heaps!"
Weapon: Particle Beam Cannon
If it's for plastic models, it should be fine.

A cheaper alternative may be OxyClean. Works best on Tamiya paints, but if you've got some, try it!
Image
User avatar
Skyfire77
Headmaster
Posts: 1127
News Credits: 2
Joined: Wed Jul 08, 2009 3:03 pm
Location: Bethel Park, PA
Strength: 8
Intelligence: 10+
Speed: 10
Endurance: 6
Rank: 7
Courage: 8
Firepower: 8
Skill: 10

Re: Tips and tricks

Postby Doubledealer93 » Sun Aug 02, 2009 8:38 am

Motto: "A logical mind is a healthy mind."
Weapon: Double-Barreled, Armor-Piercing Particle Beam Cann...
sorry no oxyclean! but i will keep using the stuff i have now, thanks!
Image

check out my collection thread, updated 2/25/13, and i kinda lost count, i have to count them again....
doubledealer93-s-collection-as-of-2-25-13-t84309.php
my tumblr: https://www.tumblr.com/blog/doubledealer93
My deviant art, loads more pics there--> http://doubledealer93.deviantart.com/
User avatar
Doubledealer93
City Commander
Posts: 3616
Joined: Sun May 04, 2008 3:19 pm
Location: Ohio
Strength: 10+
Intelligence: 10+
Speed: 4
Endurance: 10+
Rank: 10+
Courage: 5
Firepower: 1
Skill: ???

Re: Tips and tricks

Postby JHand » Mon Aug 17, 2009 12:27 am

Hi. Sorry that I haven't been logged on here for over a year. Anyway, silly question: Does anybody use Reeves Acrylic Paints? I purchased a set of 12 some time ago and am in the middle of a second repaint. Furthermore, what brand of paints do some of you use for ya repaints?

Just looking for some feedback :???:
JHand
Mini-Con
Posts: 31
Joined: Sun Jun 24, 2007 12:14 pm
Alt Mode: Lamboghini
Strength: 3
Intelligence: 6
Endurance: 5
Courage: 4
Firepower: 2
Skill: 4

Re: Tips and tricks

Postby Gutter Bunny » Mon Aug 17, 2009 5:41 am

JHand wrote:Hi. Sorry that I haven't been logged on here for over a year. Anyway, silly question: Does anybody use Reeves Acrylic Paints? I purchased a set of 12 some time ago and am in the middle of a second repaint. Furthermore, what brand of paints do some of you use for ya repaints?

Just looking for some feedback :???:


I personally have been messing around with Tamiya acrylics. I havn't had any issue with them, and they clean up unbelievably easy.

I've heard great things about the Mr Color line from Gunze Sangyo. Unfortunately, my local hobby shops do not keep stock of them. When i inquired with one of the owners, they said that they are hard to keep in stock because Gunze only ships to the United States "once or twice". I'm not sure if he meant once or twice a year, once or twice a month, once or twice ever six months etc.

I'd be interested in trying some enamels but i haven't a clue how to go about cleaning them up. If anybody would like to shed some light on that for me it would be much appreciated. :???:
Image
Gutter Bunny
Brainmaster
Posts: 1325
Joined: Fri Dec 22, 2006 1:56 am
Location: The last place you look...

Re: Tips and tricks

Postby JHand » Mon Aug 17, 2009 11:55 am

Gutter Bunny wrote:
JHand wrote:Hi. Sorry that I haven't been logged on here for over a year. Anyway, silly question: Does anybody use Reeves Acrylic Paints? I purchased a set of 12 some time ago and am in the middle of a second repaint. Furthermore, what brand of paints do some of you use for ya repaints?

Just looking for some feedback :???:


I personally have been messing around with Tamiya acrylics. I havn't had any issue with them, and they clean up unbelievably easy.

I've heard great things about the Mr Color line from Gunze Sangyo. Unfortunately, my local hobby shops do not keep stock of them. When i inquired with one of the owners, they said that they are hard to keep in stock because Gunze only ships to the United States "once or twice". I'm not sure if he meant once or twice a year, once or twice a month, once or twice ever six months etc.

I'd be interested in trying some enamels but i haven't a clue how to go about cleaning them up. If anybody would like to shed some light on that for me it would be much appreciated. :???:



Thanks again for your response. I've heard of Tamiya paints, but have not really looked into them. I hear a lot about Testors or Citadel (from Games Workshop).
JHand
Mini-Con
Posts: 31
Joined: Sun Jun 24, 2007 12:14 pm
Alt Mode: Lamboghini
Strength: 3
Intelligence: 6
Endurance: 5
Courage: 4
Firepower: 2
Skill: 4

Re: Tips and tricks

Postby Skyfire77 » Mon Aug 17, 2009 9:33 pm

Motto: "Science can't move forward without heaps!"
Weapon: Particle Beam Cannon
Gutter Bunny wrote:
JHand wrote:Hi. Sorry that I haven't been logged on here for over a year. Anyway, silly question: Does anybody use Reeves Acrylic Paints? I purchased a set of 12 some time ago and am in the middle of a second repaint. Furthermore, what brand of paints do some of you use for ya repaints?

Just looking for some feedback :???:


I personally have been messing around with Tamiya acrylics. I havn't had any issue with them, and they clean up unbelievably easy.

I've heard great things about the Mr Color line from Gunze Sangyo. Unfortunately, my local hobby shops do not keep stock of them. When i inquired with one of the owners, they said that they are hard to keep in stock because Gunze only ships to the United States "once or twice". I'm not sure if he meant once or twice a year, once or twice a month, once or twice ever six months etc.

I'd be interested in trying some enamels but i haven't a clue how to go about cleaning them up. If anybody would like to shed some light on that for me it would be much appreciated. :???:



Gunze stopped shipping to the US early last year, saying it wasn't profitable anymore. Supposedly they restarted recently, but they're still hard to find in brick-and-mortar stores. There's a few online stores that carry it.
Personally, I've only ever used Testors on my models and 'Formers. Testors has their own thinner/brush cleaner for enamel. Enamels are a little trickier to use, you need to have plenty of ventilation when you're using them (otherwise... 8-} =P~ ), but I like the coverage better. Metallic colors especially look more realistic.
Image
User avatar
Skyfire77
Headmaster
Posts: 1127
News Credits: 2
Joined: Wed Jul 08, 2009 3:03 pm
Location: Bethel Park, PA
Strength: 8
Intelligence: 10+
Speed: 10
Endurance: 6
Rank: 7
Courage: 8
Firepower: 8
Skill: 10

Re: Tips and tricks

Postby Mykltron » Wed Aug 26, 2009 1:17 pm

Motto: "If I win again I'm still the champion. If you win HAH! that's just impossible.

Weapon: tea cup."
JHand wrote:Hi. Sorry that I haven't been logged on here for over a year. Anyway, silly question: Does anybody use Reeves Acrylic Paints? I purchased a set of 12 some time ago and am in the middle of a second repaint. Furthermore, what brand of paints do some of you use for ya repaints?

Just looking for some feedback :???:


I've been using Reeves for a while and I like them. I like that they come thick as toothpaste so you can adjust them to suite your needs.
Image

Why not take a look at My TF Repaints? Updated 23rd January 2015
User avatar
Mykltron
Guardian Of Seibertron
Posts: 5979
News Credits: 9
Joined: Sat Feb 09, 2008 5:43 am
Location: Nearby. Watching.

Re: Tips and tricks

Postby Grahf » Mon Oct 12, 2009 6:53 pm

Motto: "The only cure for stupidity is death."
I've always used Testors and Games Workshop acrylics. Most of the time I'll use Krylon Fusion and Krylon Primer. I know some people swear by Tamira paints, but all I use of theirs are the clear coats.

After everything has been painted I use a Matte or Gloss varnish depending on whatever the alt mode is. Finally, I leave panel lining as the last step. Having some kind of varnish seems to make the panel lining easier.
Image
Sometimes, just checking one more store isn't worth it

Maynard James Keenan wrote:Cold silence has a tendency to atrophy any sense of compassion.
User avatar
Grahf
Headmaster
Posts: 1066
Joined: Tue Aug 07, 2007 9:14 pm
Location: The Dethklok home for wayward kitties
Buy from Grahf on eBay

Re: Tips and tricks

Postby Heckfire » Sat Oct 24, 2009 9:24 pm

Motto: "Nothing is impossible, just improbable."
Weapon: "Claw" Flame-Throwers
GRRRRRR! OK, I need some advice from you more experienced TF/toy customisers: I've been repainting a couple of figs (ROTF Swerve into Windcharger and Road Rage, ROTF Gears into Crosscut, plus a little detail work on TFA Bandit Lockdown and a pseudo Onyx Primal redeco on regular Battymus Primal) and when I applied the sealant to keep the paint from coming off (especially bad on 'charger's shoulders after a couple of transformations), it started washing the paint off! And not just the paint I'd applied, the paint HASBRO applied, too...poor Crosscut's Autobot symbol melted before my eyes! My ex, an old vet at lead miniatures, thinks I sprayed too much on, but I also want to canvas some other minds as to what I may have done wrong and, more importantly, what you do/use when you're finishing up a paint job.

Also, on another minor note, I'm having problems getting paint to stick to Robot Heroes Arcee's head; the texture is tacky and comes off on my fingers, as well as mixes together horribly. Any tips?
"Grab a shovel, I'm one skull away from a Mouseketeer reunion." - Bender
"I've never seen anything this beautiful in the entire galaxy...all right, give me the bomb." —Ultra Magnus
Image
You got WRECK-ROLLED!
Heckfire
Vehicon
Posts: 398
Joined: Sun May 31, 2009 10:37 am
Strength: 4
Intelligence: 9
Speed: 5
Endurance: 4
Rank: 1
Courage: 7
Firepower: 6
Skill: 8

Re: Tips and tricks

Postby Skyfire77 » Sun Oct 25, 2009 9:31 am

Motto: "Science can't move forward without heaps!"
Weapon: Particle Beam Cannon
when I applied the sealant to keep the paint from coming off (especially bad on 'charger's shoulders after a couple of transformations), it started washing the paint off! And not just the paint I'd applied, the paint HASBRO applied, too.


Huh. I've had that happen before by applying bottle lacquer over not quite dry paint, but I've never has a problem with rattle-can stuff. Sounds like the solvent is too strong; what are you using?

Also, on another minor note, I'm having problems getting paint to stick to Robot Heroes Arcee's head; the texture is tacky and comes off on my fingers, as well as mixes together horribly. Any tips?


Wash it with warm water and dish detergent, then apply a two thin coats of acrylic paint as a primer.
Image
User avatar
Skyfire77
Headmaster
Posts: 1127
News Credits: 2
Joined: Wed Jul 08, 2009 3:03 pm
Location: Bethel Park, PA
Strength: 8
Intelligence: 10+
Speed: 10
Endurance: 6
Rank: 7
Courage: 8
Firepower: 8
Skill: 10

Re: Tips and tricks

Postby MutantDinosaur » Fri Oct 30, 2009 3:58 pm

Quick (maybe easy) question:

What's so great about gunmetal?

Many of the repaint/custom masters use gunmetal (enamel or acrylic), especially as a layer in metal-effect drybrushing. But it doesn't seem like it would fit in with a gradient scheme, as other colors used don't have that BLUE that gunmetal does (eg, silver, flat black, dark and light grays, etc). So what does it bring to the table?

Thanks!

MutantDinosaur
MutantDinosaur
Mini-Con
Posts: 31
News Credits: 2
Joined: Mon Sep 22, 2008 3:52 pm

Re: Tips and tricks

Postby Heckfire » Sun Nov 15, 2009 11:14 pm

Motto: "Nothing is impossible, just improbable."
Weapon: "Claw" Flame-Throwers
First off, an update on my previous question: it turns out I was using the wrong type of sealant, so once I switched to the proper type, I've had no more problems with melting Autobrands.

On a related note, however, I apparently got too strong of a paint remover and accidentally melted poor Cybertron Smokescreen's roof off, so, just in general, are there any simpler ways of removing unwanted paint, as well as a way of keeping paint from getting smeared and finger-printed in the first place?

Also, does anyone have any advice or tips on how to keep the original colors from showing through the paint? Case in point, I'm attempting to repaint TFA Activators Soundwave into Rumble, but all multiple coats do is make him look like he's got make-up caked on. It admittedly might just be a problem with the red paint I'm using, since the same thing happened with TFA Oil Slick's "tattoo," but any tips for a novice will be appreciated.
"Grab a shovel, I'm one skull away from a Mouseketeer reunion." - Bender
"I've never seen anything this beautiful in the entire galaxy...all right, give me the bomb." —Ultra Magnus
Image
You got WRECK-ROLLED!
Heckfire
Vehicon
Posts: 398
Joined: Sun May 31, 2009 10:37 am
Strength: 4
Intelligence: 9
Speed: 5
Endurance: 4
Rank: 1
Courage: 7
Firepower: 6
Skill: 8

Re: Tips and tricks

Postby IceWilly » Sat Dec 26, 2009 1:50 pm

Can anyone point me in the direction of some good tutorials for repainting? there is a lot of warhammer stuff online which is probably pretty relevant, but since transformers move around a bit there may be some specifics.

I have a simple airbrush I plan to use for larger sections and such, and I will be looking into decent smaller brushes for detailing.

The hobby shop guys I talked to recommended acrylic water based paintss and a Top loaded dual action air brush. Maybe the air brush is overkill, but I got it as a gift so I want to learn to use it.

My first project will be repainting ROTF superion into G1 colors and painting the Fans Project kit a bit as well.

Notable questions:
- How to prep the figures (with or without existing paint) Strip it all down? remove the paint apps with alcohol? Base coat over everything? no base coat, just paint?
- How to mask off ears I don't want touched, or for hard line edges? Painters tape? rubber cement?
- Should I be dis-assembling the transformers and painting the individual pieces on their own? Should I bother putting paint on ball joints?
- Clear coat everything?

Obviously I am totally in the dark, and need some good information to point me in the right direction.

thanks
IceWilly
Fuzor
Posts: 248
Joined: Wed May 30, 2007 1:03 am

Re: Tips and tricks

Postby Skyfire77 » Sun Dec 27, 2009 5:25 pm

Motto: "Science can't move forward without heaps!"
Weapon: Particle Beam Cannon
IceWilly wrote:Can anyone point me in the direction of some good tutorials for repainting? there is a lot of warhammer stuff online which is probably pretty relevant, but since transformers move around a bit there may be some specifics.

I have a simple airbrush I plan to use for larger sections and such, and I will be looking into decent smaller brushes for detailing.

The hobby shop guys I talked to recommended acrylic water based paintss and a Top loaded dual action air brush. Maybe the air brush is overkill, but I got it as a gift so I want to learn to use it.

My first project will be repainting ROTF superion into G1 colors and painting the Fans Project kit a bit as well.

Notable questions:
- How to prep the figures (with or without existing paint) Strip it all down? remove the paint apps with alcohol? Base coat over everything? no base coat, just paint?
- How to mask off ears I don't want touched, or for hard line edges? Painters tape? rubber cement?
- Should I be dis-assembling the transformers and painting the individual pieces on their own? Should I bother putting paint on ball joints?
- Clear coat everything?

Obviously I am totally in the dark, and need some good information to point me in the right direction.

thanks


Here's how I do it:
Gather up some small empty bottles (paint, pills, whatever). Take the torso apart (GO SLOW if there are any gimmicks containing springs, as they may launch themselves across the room), note which screw came from which hole, and put the parts you're not gonna paint into a bottle, then label it. Pins can be removed by tapping them out with a hammer and nail. You may want to use multiple bottles if there's a lot of screws. Alternately get a roll of double-sided tape and mark each screw individually. Either way make sure you remember what goes where. Trust me: mixing up or losing screws and other hardware is a major pain in the ass. Set the limbs aside for later.
You can strip the factory paint off the plastic parts with rubbing alcohol or paint thinner, then wash the parts in warm water and dish detergent, and let them air dry.
Okay, here's where things get tricky. Remember most parts on a TF are moving parts, and you will have issues if you put paint on too thick. Be very careful when painting, or, if you feel comfortable enough: Note any areas where parts will rotate or slide past each other while posing or transforming, and with a nail file or fine grit sandpaper very gently sand them down. You want to remove only about the thickness of two pieces of paper. This way once you paint and seal the parts, you should be back to the original dimensions, and you shouldn't have to worry about binding or paint-wear.
From here you can paint, detail and wash as you see fit. Go slow, and give the paint time to dry between colors; I can get away with as little as a half hour, depending on whether it's acrylic or enamel paint. Don't bother painting the balls or inside of the socket, the paint will just rub off, and worst case you may change the shape, causing the joint to become stiff. Once you're done painting, give it a day or two to dry completely, then seal the parts. I prefer Testors Dullcote in the rattle-can for robot part and non-car alt-modes (Carformers get Glosscote, natch), but use whatever you like. Set the torso aside and start on the limbs. Once you finish painting one limb, reassemble it, then move on to the next). Once everything is done, reassemble the figure, and transform and/or move all the limbs just to make sure everything works.

For your specific questions:

I've found that enamel or acrylic, most hobby paints cover well enough you don't need primer unless A) you're painting white something that was originally dark or B) the part is PVC (2007 Screamer's "fingers", Barricade's head, etc.).

You can use anything from post-it notes to tape (Scotch Pop-up Tape is a godsend!) to pin-stripe tape to silly putty to funtak to mask off parts, depending on what you're doing, or what effect you want.

Osprey publishing has a great book on airbrushing, as does Kalmbach.
Image
User avatar
Skyfire77
Headmaster
Posts: 1127
News Credits: 2
Joined: Wed Jul 08, 2009 3:03 pm
Location: Bethel Park, PA
Strength: 8
Intelligence: 10+
Speed: 10
Endurance: 6
Rank: 7
Courage: 8
Firepower: 8
Skill: 10

Re: Tips and tricks

Postby El Duque » Sun Jan 17, 2010 3:36 pm

Motto: "I ain't got time to bleed!"
Weapon: Gattling Gun
I'm working on my first repaint. Coverting a Universe Sunstreaker to Wheeljack using the Master Collectables upgrade set. I'm basically done painting and I'm pretty happy with my results. I still have all the parts unassembled and curing. My concern is the paint rubbing and chipping off especially at the interlocking tabs for the body panels. What do you guys do to prevent this?
User avatar
El Duque
Matrix Keeper
Posts: 9760
News Credits: 5749
Joined: Sun Apr 01, 2007 8:57 pm
Location: tornado alley

Next

Return to Customizations

Transformers and More @ The Seibertron Store

Visit our store on eBay
These are affiliate links. We may earn commissions when you purchase items or services through these links.
Visit shop.seibertron.com to buy "TRANSFORMERS GALAXIES #1 RI-A 1:10 IDW Comics 2019 1RIA (CA) Caltsoudas 211118C"
TRANSFORMERS GALAX ...
Visit shop.seibertron.com to buy "DUKE #1 Cvr A Image Comics 2023 1A GI JOE 0623IM806 (A/CA) Reilly (W)WIlliamson"
DUKE #1 Cvr A Imag ...
Visit shop.seibertron.com to buy "TRANSFORMERS #6 Cvr A Image Comics 2024 Skybound 0124IM319 6A (CA) Johnson"
NEW!
TRANSFORMERS #6 Cv ...
Visit shop.seibertron.com to buy "COBRA COMMANDER #1 Cvr B Image Comics 2024 1B 1123IM198 (CA) Aja (W) Williamson"
COBRA COMMANDER #1 ...
Visit shop.seibertron.com to buy "DUKE #1 Cvr F 1:100 Image Comics 2023 1F GI JOE 1023IM264 (CA) Jonboy 231222C"
DUKE #1 Cvr F 1:10 ...
Visit shop.seibertron.com to buy "TRANSFORMERS BACK TO THE FUTURE #1 RI-A 1:10 IDW Comics 2020 AUG200530 1RIA"
TRANSFORMERS BACK ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #15 Marvel Comics 1986 (CA) Trimpe (W) Budiansky 230926Q"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "Transformers ROBOTS IN DISGUISE #7 Cvr A IDW Comics 2012 7A (CA)Griffith 220709A"
Transformers ROBOT ...
Visit shop.seibertron.com to buy "Transformers REIGN STARSCREAM #4 RI 1:10 IDW Comics Movie Sequel 4RI 230323B"
Transformers REIGN ...
Visit shop.seibertron.com to buy "Transformers WAR'S END #1 Cvr A IDW Comics 2022 DEC210546 1A (CA) Hernandez"
Transformers WAR'S ...
Visit shop.seibertron.com to buy "TRANSFORMERS #5 Cvr A Image Comics 2024 Skybound 1223IM323 5A (CA) Johnson"
NEW!
TRANSFORMERS #5 Cv ...
Visit shop.seibertron.com to buy "TRANSFORMERS ESCAPE #4 Cvr A IDW Comics 2021 JAN210504 4A (CA) McGuire-Smith"
TRANSFORMERS ESCAP ...
Visit shop.seibertron.com to buy "Transformers VALENTINE'S DAY SPECIAL RI 1:10 IDW Comics DEC190657 231010I"
Transformers VALEN ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #18 Marvel Comics 1986 (CA) Trimpe (W) Budiansky 210422A"
THE TRANSFORMERS # ...
* Price and quantities subject to change. Shipping costs, taxes and other fees not included in cost shown. Refer to listing for current price and availability.
Find the items above and thousands more at the Seibertron Store on eBay
Transformers Podcast: Twincast / Podcast #346 - Gas Station Jamboree
Twincast / Podcast #346:
"Gas Station Jamboree"
MP3 · iTunes · RSS · View · Discuss · Ask
Posted: Saturday, March 23rd, 2024

Featured Products on Amazon.com

These are affiliate links. We may earn commissions when you purchase items or services through these links.
Buy "Transformers Titans Return Arcee Action Figure Set" on AMAZON
Buy "Transformers: Generations Power of the Primes Titan Class Predaking" on AMAZON
Buy "Transformers: Generations Power of The Primes Solus Prime Prime Master" on AMAZON
Buy "Transformers Generations Power of The Primes Deluxe Class Dinobot Snarl" on AMAZON
Buy "Transformers: Bumblebee -- Energon Igniters Nitro Series Optimus Prime" on AMAZON
Buy "Transformers Studio Series 13 Voyager Class Movie 2 Megatron" on AMAZON
Buy "Transformers Generations Power of The Primes Deluxe Terrorcon Rippersnapper" on AMAZON
Buy "Cyberverse Warrior Class Acid Storm" on AMAZON
Buy "Transformers Robots in Disguise Warrior Class Bumblebee Figure" on AMAZON
Buy "Transformers: Bumblebee – Energon Igniters Power Plus Series Bumblebee" on AMAZON
Buy "Transformers Generations Combiner Wars Deluxe Class Autobot Hound" on AMAZON
Buy "Transformers Generations Titans Return Autobot Hot Rod and Firedrive" on AMAZON