Seibertron.com Energon Pub Forums

AFTRHR wrote:

Rodimus Prime wrote:

Rysquad wrote:Opened my Battleslash and Roadtrap today.

Holy moly I'm impressed.

Great figure in Battletrap mode.

And the engineering.. I hope there are more Duocons in this line. Flytread and Skywheels?

Got pics?

And aren't they Skytread and Flywheels?

I'm assuming he's saying that Flytread and Skywheels be the name of the two components of Flywheels similar to Battleslash and Roadtrap. Maybe he's using Skytread's names as part of Flywheels because he's the trademarked name.

Yep. I want to end up with Flywheels..

Wolfman Jake wrote:I wonder what Hasbro has planned for a theoretical reuse of the PotP Optimus Prime mold. Would they just do another black repaint in the same line to get a "Nemesis Prime" use out of the mold? It would be kind of fun to have a "Nemesis Orion Pax" figure because of that. I'd like to see instead a retool into Ultra Magnus, though admittedly, that would be a VERY extensive retool. The truck cab could be left largely untouched, but an entirely new trailer would be needed, and they'd have to do at least some resculpting of the Orion Pax robot parts. Or, and I know this is hard to believe, Hasbro might just leave well enough alone and not try to cash in on a double-dip on this mold?

Here's something crazy.

"Who did Dion become?"

Use it for Dion to Ultra Magnus!

The evolution gimmick is right now involves Primes but you could make the case that Optimus chose Ultra Magnus but the Matrix itself had other ideas.

For Leader Class

In CW, they double-dipped on Megatron (Armada Megatron) and Thundercracker (Starscream and Skywarp) and used Ultra Magnus for TR Powermaster Optimus Prime.

In TR, same story with Blaster (Soundwave), Sixshot (Quickswitch), Powermaster Optimus Prime (Magnus Prime), and maybe less so with Skyshadow (Overlord).

Dang it i was gonna skip Rodimus Unicronus, but you guys are making me want him

I know Walmart is the place to find Wave 2 right now but here are the Target DPCIs:

POTP Prime Masters

Alchemist Prime 087-06-8339

POTP Legends

Battleslash 087-06-7027
Tailgate 087-06-7028
Roadtrap Tailgate 087-06-7029

POTP Deluxe

Moonracer 087-06-8343
Cutthroat 087-06-7062
Blot 087-06-7063
Sinnertwin 087-06-7064

POTP Voyager

Hun-Gurr 087-06-8360
Elita-1 087-06-8359
Inferno 087-06-8958

POTP Leader

Rodimus Unicronus 087-06-8365

As far as this Rodimus goes, I think it would have been more interesting if they had left the Symbol off altogether, since he's basically a creation/possession of Unicron. It just seems to me like he shouldn't have a group affiliation.

Rodimus Knight wrote:As far as this Rodimus goes, I think it would have been more interesting if they had left the Symbol off altogether, since he's basically a creation/possession of Unicron. It just seems to me like he shouldn't have a group affiliation.

When you purchase the toy, you can imagine whatever you like, I'm sure retro labels or some other 3P company will make replacement stickers for either SG, or for those that want no faction at all.

The simple fact is for the purpose of marketing the toys, there are only 2 factions -Good & Bad, and all get marketed under one or the other. All past Unicron toys have all been labeled as Decepticon, despite him not being so in fiction. I think only Takara would occasionally throw in a 3rd faction (Blendtrons etc...), but that was very rare indeed.

william-james88 wrote:

Hotconvoy wrote:Dang it i was gonna skip Rodimus Unicronus, but you guys are making me want him

SAME!

I found him today at the Walmart in Vadnais Heights, MN on my lunch break. He looks so good in this black, purple, and gray deco! When I was driving back to work, ACDC's "Back in Black" came on the radio. I found that very a propos. I can't wait to get off work so I can go home and open him up!

From regular toy reviewer and fellow Seibertronian Chuckdawg1999, we have a video review of the latest Prime Masters to hit retail, Alpha Trion with Landmine Pretender armor and Alchemist Prime with Submarauder Pretender armor. Chuck shows us the differences between Alpha Trion/Landmine who's retooled from Vector Prime/Metalhawk, as well as giving us a good look at the new mold of Submarauder. Check out the review below and let us know what you think of the latest Prime Masters to hit retail!




BONUS!
After our post of a silent review of Power of the Primes Elita One-1 (which you can see here), we now have a talkie video review of the fembot jet from YouTube. courtesy of Baltmatrix! Please enjoy!

I still need to open up Battletrap, but Tailgate is a cutie. :pI might prefer his T30 look -- but this one will do!

Just got alchemist and Alpha Trion, super fun little dudes. I went looking for Prime, saw him yesterday but didn't have the funds. Today he was gone, so I was sad until I saw these prime masters! The details on all of the masters is so nice, every time I really look them over I see new things. Skullgrins prime master has wheels sculpted onto the sides of his legs. Saw that today.

Nice, Aces! All I'm seeing today are Op & Roddy....

Rysquad wrote:

D-Maximus_Prime wrote:Neat news about Blastoff having a clear Megatronus. But I hate individual -master guys since they don't really have a place to go. Rodimus Prime will go with LG-63 G2 Megatron's dragon dude, Thunderwing is with Nitro Zeus, and Scorponok with Tidal wave, but finding more guys to pair these guys with kinda sucks.

I kinda want to buy more Nitros for guys like Scorponok.

I have put serious thought into hunting down more Nitros to slap heads on, like Apeface, Overboard, and one to actually keep his regular head

ZeroWolf wrote:I'm liking elita 1 more every time I see her, especially the gundamesq shoes of hers.

Same. Elita may be the repaint/retool, but she has killed it. She's fantastic.

And as for Rodimus Unicronus, screw everything, he is SG Rodimus Prime to me, and I will guy the labels to make sure he stays that way.

Quick thoughts on Roadtrap and Battleslash:

Battleslash isn't so bad. Helicopter mode is just convincing enough, aside from the big socket on the front, but I'm sure it could be explained away as a canon or something. Bot mode isn't terrible, proportions are alright.

Roadtrap is every bit as fidgety as Legends Wheelie in vehicle mode. You get a side panel in place and the back part splits, you get that part together and half the front window pops up. Pretty frustrating even with the built in locks inside the front wheels that are supposed to keep everything together. Bot mode is alright, his legs look stumpy thanks to the windows, but standing him next to Bumblebee the leg joints are all in the same place. Annoying alt mode aside, he's OK.

Their vehicle interaction with Prime Masters is very questionable since they can only sit with their knees bent the wrong way. Feels more like they were meant to be powered up by the PM spark modes rather than ridden by the bot modes.

As Battletrap he's pretty nice. Hands look awkward, but not terrible. He's free of kibble which is a huge plus when compared to Centuritron (the closest thing to Battletrap in Generations). His knees are fine, they're covered and go further down his leg than they look like they do in pictures. I'm not crazy about the official transformation of his back so I like to reassemble the top of the helicopter on his back keeping the propellers functional, though extended on a pair of bars, but I like the way they can be pivoted for hovering and such. I'm happier with him every time I play around with him.

Really looking forward to Flywheels and optimistic for a potential Landcross in the future.

Emerje

Great to hear your thoughts on Battletrap, Emerje -- I might have to open up them duocons tonight.....

Today was a great day for me. I managed to snag both Voyagers and Rodimus! I'm relieved to say no breakage on evil Roddy's exhaust pipes. Hun-Gurrr is cool and his torso mode may have just become my favorite ever. Elita looks fantastic in robot and torso modes. BUT... I cannot fully transform her into jet mode. The nose cone section just does NOT line up with the four pegs it's supposed to attach to. I spent a good hour trying to fiddle/force it into place with no luck. Has anyone else had an issue with this?

Nevermind. I finally got it to work. It's difficult, but if you press in at the correct angles in the right sequence, the nose cone will just barely fit into place. And for anyone wondering, Elita's legs do properly fit together in jet mode. No more gap.

Lore Keeper wrote:Nevermind. I finally got it to work. It's difficult, but if you press in at the correct angles in the right sequence, the nose cone will just barely fit into place. And for anyone wondering, Elita's legs do properly fit together in jet mode. No more gap.

Wait, are you saying that Elita has no thigh gap? RUDE!

Wolfman Jake wrote:

Lore Keeper wrote:Nevermind. I finally got it to work. It's difficult, but if you press in at the correct angles in the right sequence, the nose cone will just barely fit into place. And for anyone wondering, Elita's legs do properly fit together in jet mode. No more gap.

Wait, are you saying that Elita has no thigh gap? RUDE!

She's THICC... Just the way I like it!
Also, for everyone that was disappointed about Abominus not having dragon head knees (I was one of them), it turns out they would not work with many limb bots due to their front kibble. It was a necessary sacrifice to keep the Scramble City compatibility intact.
Picture for reference: https://www.instagram.com/p/BfPdJ6MhTkZ/

Looking HAWT, Elita-Prime!

Lore Keeper wrote:

Wolfman Jake wrote:

Lore Keeper wrote:Nevermind. I finally got it to work. It's difficult, but if you press in at the correct angles in the right sequence, the nose cone will just barely fit into place. And for anyone wondering, Elita's legs do properly fit together in jet mode. No more gap.

Wait, are you saying that Elita has no thigh gap? RUDE!

She's THICC... Just the way I like it!
Also, for everyone that was disappointed about Abominus not having dragon head knees (I was one of them), it turns out they would not work with many limb bots due to their front kibble. It was a necessary sacrifice to keep the Scramble City compatibility intact.
Picture for reference: https://www.instagram.com/p/BfPdJ6MhTkZ/

I don't have to have scramble city compatibility, but practically, out of all the combiner wars line, I think the dragon knees would only work with the Dead End / Breakdown molds. I still don't care and am hoping for third party Abominus thigh fillers with adjustable dragon heads

Thanks to our very own Cobotron, we now have pictures of the highly anticipated Transformers Power of the Primes Elita One -1 and Hun-Gurrr fully combined! While we've seen pictures of both of them in their torso modes before, we haven't seen many pictures with any limbs attached- and in the case of Elita-1, this is the first time most of us have seen her with ANY limbs attached. Cobotron uses the Combaticons as limbs for Abominus to great effect, and the G2 Aerialbots for Elita-1 (no official name for her gestalt mode seems likely to happen) in spectacularly garish G2 fashion. He also shows off Elita-1 with Botcon Tigatron, and Combiner Wars Wheeljack, Quickslinger and Rook as limbs.


















What do you think? Are you more excited for the rest of the Terrorcons to show up now? Itching for Moonracer and Wave 4's Firestar to give Elita-1 some more fembot limbs? Let us know below!

Where's Elita's combiner head?

I'm blown away by Hungerr/Abombinus there were SOO MANY little touches they did to that mold they *didn't* have to do. The automorphing with the fins, the *extra* fins on the shin panels!

As for Elita Uno it's amazing how much a deco/color layout changes the figure. I couldn't stand starscream in Torso mode... but somehow... I'm fine with hers. Her thigh/wrist also being white with the red/maroon gauntlet does subtle wonders for breaking up that "hulk forearm".