The Energon Pub

Posted: **Wed Sep 28, 2011 2:40 pm**

In our second piece of third-party Sixshot news for the day, MasterMind Creations have revealed a prototype image of their upcoming homage, Terminus Hexatron. Up until now the figure has only been seen in a series of computer generated images. The prototype along with other upcoming MMC designs will be on display at this year's Victoria Ultimate Hobby and Toy Fair.

MMC is proud to announce to be a guest attendee to the 8th Victoria Ultimate Hobby and Toy Fair dated October 16th.

Prototype of Terminus Hexatron will make his debut in the show, attendees will be able to thoroughly see the first design of our Reformatted line. Along Hexatron there will be more our upcoming designs shown in the event.

Posted: **Wed Sep 28, 2011 2:52 pm**

El Duque wrote:In our second piece of third-party Sixshot news for the day, MasterMind Creations have revealed a prototype image of their upcoming homage, Terminus Hexatron. Up until now the figure has only been seen in a series of computer generated images. The prototype along with other upcoming MMC designs will be on display at this year's Victoria Ultimate Hobby and Toy Fair.

MMC is proud to announce to be a guest attendee to the 8th Victoria Ultimate Hobby and Toy Fair dated October 16th.

Prototype of Terminus Hexatron will make his debut in the show, attendees will be able to thoroughly see the first design of our Reformatted line. Along Hexatron there will be more our upcoming designs shown in the event.

wow... thas a nice protoform of (imnot)sixshot. can't really wait to see more.. oh wait first reply lol

Posted: **Wed Sep 28, 2011 2:55 pm**

Wow. I may actually have to buy two of these. I need to see how this looks out of protoform though

Posted: **Wed Sep 28, 2011 2:59 pm**

This fellas gonna be EPIC.

Posted: **Wed Sep 28, 2011 3:13 pm**

Oh hells yeah! I'm getting this one for sure....

Posted: **Wed Sep 28, 2011 3:21 pm**

An ambitious character to tackle and I think they are going to pull it off, wonderfully.

Posted: **Wed Sep 28, 2011 3:56 pm**

Oh hell yeah...MMC is startnig to show signs of being a legitimate player in the 3rd party market. This is a tough figure to take on and its looking very promising..

Posted: **Wed Sep 28, 2011 4:52 pm**

Is that a pin running through his knuckles? Poseable fingers??!! Even if it's four joined together, that's awesome. This guy is looking to be quite the figure. Really can't wait for this one.

Posted: **Wed Sep 28, 2011 5:13 pm**

DROOOOOOL! =P~

i believe it is a pin!

ive been wanting a good classics sixshot since 07 and it looks like ive found what ive been looking for. well done chaps, well done.

might i add casting the prototype in clear was a brilliant choice?

Posted: **Wed Sep 28, 2011 5:27 pm**

Looking good. Sixshot is my first G1 Transformer so I have high expectations for his remake. So far, I don't think that I will be disappointed

.

Posted: **Wed Sep 28, 2011 5:28 pm**

LiKwid wrote:Oh hell yeah...MMC is startnig to show signs of being a legitimate player in the 3rd party market. This is a tough figure to take on and its looking very promising..

one of many tough characters to take on actually. hells if they pull this off and the quality is as good looking as what the photo teases, I mean yes they did well with Knight Morpher and its different forms (Nemesis & Shattered Glass).

even the final colour (yes im uk) Voted here for Civil War shows an awesome concept

Posted: **Wed Sep 28, 2011 5:54 pm**

I'll wait for the second release of this that is a lot better than the first

Posted: **Wed Sep 28, 2011 6:12 pm**

Oh how badly I wish I could take the trip down to Vic for the showing of this... the one time something good comes of living on this godforsaken island and I more than likely can't make it.

Posted: **Wed Sep 28, 2011 7:35 pm**

Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Posted: **Wed Sep 28, 2011 8:05 pm**

monstergrotusque wrote:Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Make sure to take pics

.

Posted: **Wed Sep 28, 2011 8:51 pm**

amcgrath929 wrote:
monstergrotusque wrote:Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Make sure to take pics .

I'll be covering this on the 15th with a press pass, galleries will be up before midnight, hopefully. =3 Will probably be on the 16th if other parties show up too.

Posted: **Wed Sep 28, 2011 8:57 pm**

Blurrz wrote:
amcgrath929 wrote:
monstergrotusque wrote:Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Make sure to take pics .

I'll be covering this on the 15th with a press pass, galleries will be up before midnight, hopefully. =3 Will probably be on the 16th if other parties show up too.

Well there ya have it....i'm absolved of any and all responsibility's. Nice.

Now i can try and focus on winning the Lucky Draw Mastermind Cyclops repaint prize. Now that thing looks awesome!!

Posted: **Wed Sep 28, 2011 10:31 pm**

I'll take it! Put it in a box and send it to now, please. Thanks! ;)^

Posted: **Wed Sep 28, 2011 10:33 pm**

Blurrz wrote:
amcgrath929 wrote:
monstergrotusque wrote:Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Make sure to take pics .

I'll be covering this on the 15th with a press pass, galleries will be up before midnight, hopefully. =3 Will probably be on the 16th if other parties show up too.

Awesome! can't wait to see what your coverage unveils. Venksta is supposed to have some new goodies out as well.

Good luck on your lucky draw monstergrotusque. That would be an incredible figure to own.

Posted: **Wed Sep 28, 2011 11:11 pm**

Now thats bad ass !!! I want one...

Posted: **Thu Sep 29, 2011 3:34 am**

Blurrz wrote:
amcgrath929 wrote:
monstergrotusque wrote:Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Make sure to take pics .

I'll be covering this on the 15th with a press pass, galleries will be up before midnight, hopefully. =3 Will probably be on the 16th if other parties show up too.

Nice, looking forward to the coverage, since I can't make it myself.

On topic: OMG, looks awesome! I wish it was grey/white though, it's a bit hard to make out the details with clear plastic.

Posted: **Thu Sep 29, 2011 6:18 pm**

kirbenvost wrote:
Blurrz wrote:
amcgrath929 wrote:
monstergrotusque wrote:Very nice! I think i'll be heading too Victoria for this one. I keep missing this toy show dammit.

Not this time.

Make sure to take pics .

I'll be covering this on the 15th with a press pass, galleries will be up before midnight, hopefully. =3 Will probably be on the 16th if other parties show up too.

Nice, looking forward to the coverage, since I can't make it myself.

On topic: OMG, looks awesome! I wish it was grey/white though, it's a bit hard to make out the details with clear plastic.

I think that's the plan - use clear plastic as a proto to try to deter potential boot-legging/copycats

Posted: **Thu Sep 29, 2011 11:32 pm**

El Duque wrote:In our second piece of third-party Sixshot news for the day, MasterMind Creations have revealed a prototype image of their upcoming homage, Terminus Hexatron. Up until now the figure has only been seen in a series of computer generated images. The prototype along with other upcoming MMC designs will be on display at this year's Victoria Ultimate Hobby and Toy Fair.

MMC is proud to announce to be a guest attendee to the 8th Victoria Ultimate Hobby and Toy Fair dated October 16th.

Prototype of Terminus Hexatron will make his debut in the show, attendees will be able to thoroughly see the first design of our Reformatted line. Along Hexatron there will be more our upcoming designs shown in the event.

please can anyone going to this canadian convention. please bring a measuring tape & measure hexatron from head to toe. not toe to wings.
i'm curious to see how tall the robot mode is & what size level it belongs in. i'm hoping it's 9.5 inch leader sized.

BTW,This thing looks awesome.

Posted: **Thu Sep 29, 2011 11:41 pm**

deathy wrote:
El Duque wrote:In our second piece of third-party Sixshot news for the day, MasterMind Creations have revealed a prototype image of their upcoming homage, Terminus Hexatron. Up until now the figure has only been seen in a series of computer generated images. The prototype along with other upcoming MMC designs will be on display at this year's Victoria Ultimate Hobby and Toy Fair.

MMC is proud to announce to be a guest attendee to the 8th Victoria Ultimate Hobby and Toy Fair dated October 16th.

Prototype of Terminus Hexatron will make his debut in the show, attendees will be able to thoroughly see the first design of our Reformatted line. Along Hexatron there will be more our upcoming designs shown in the event.

please can anyone going to this canadian convention. please bring a measuring tape & measure hexatron from head to toe. not toe to wings.
i'm curious to see how tall the robot mode is & what size level it belongs in. i'm hoping it's 9.5 inch leader sized.

BTW,This thing looks awesome.

Why wait?

Posted: **Thu Sep 29, 2011 11:48 pm**

El Duque wrote:
deathy wrote:
El Duque wrote:In our second piece of third-party Sixshot news for the day, MasterMind Creations have revealed a prototype image of their upcoming homage, Terminus Hexatron. Up until now the figure has only been seen in a series of computer generated images. The prototype along with other upcoming MMC designs will be on display at this year's Victoria Ultimate Hobby and Toy Fair.

MMC is proud to announce to be a guest attendee to the 8th Victoria Ultimate Hobby and Toy Fair dated October 16th.

Prototype of Terminus Hexatron will make his debut in the show, attendees will be able to thoroughly see the first design of our Reformatted line. Along Hexatron there will be more our upcoming designs shown in the event.

please can anyone going to this canadian convention. please bring a measuring tape & measure hexatron from head to toe. not toe to wings.
i'm curious to see how tall the robot mode is & what size level it belongs in. i'm hoping it's 9.5 inch leader sized.

BTW,This thing looks awesome.

Why wait?

El Duque,Thanks for the link with size info.

8.5 is that measuring the robot mode properly from head to toe. or is is this measuring the toy in-properly from toe to wings like some guy at hasbro measure DOTM Ultimate optimus prime & said it was over 18 inches tall.

Some on-line TF fans are hoping the 8.5 Measurement of Hexatron is from head to toe. then theirs some on-line TF fans who think hextatron's 8.5 measurement is from toe to wings.

hopefully we get a definate answer at the canadian convention in a few weeks.

FWIW,I'm gonna give a solid guess & saw that 8.5 hexatron mesayrement is from head to toe.

The Energon Pub

MMC Terminus Hexatron Prototype Images

MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images

Re: MMC Terminus Hexatron Prototype Images