Page 1 of 2
Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 4:49 pmby Blurrz
The garage kit maker
Renderform was hard at work, and he certainly didn't disappoint at the
Victoria Toy Fair this Sunday! Multiple add-ons were on display, including the to be released
RF-006 Bumblebee heads. Also shown was the upgrade to Takara Dark of the Moon
Vortex, a new 'Wrecker' head for
Grappel and new guns for any
Rodimus. Renderform will also be making missiles for
Universe Ravage and Shattered Glass Ravage. Seeker fans will be happy, as Renderform is dishing out new null-rays! My favorite from the show are the upcoming Decepticon/Autobot logo Shields and Swords. Check out all the fun below!
47 photos will be in Renderform's gallery in the
event page, which will be updated later.
Seibertron.com - The Ultimate Transformers Resource!
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 5:04 pmby Mkall
At first, I though that Grapple didn't need a new head.
Then I saw the truth...
I will buy everything shown here with no remorse.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 5:11 pmby Razorclaw0000
Same here. I can't wait for the the rest of RF-006, and a full set of seeker null rays, in every color, for every single seeker. $$$$$
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 5:31 pmby MINDVVIPE
those null rays are a bit oversized imo. Too long. Those shields and swords are pretty cool though.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 5:46 pmby Midnight_Fox
Definitely need the Ravage weapons(both styles), the Decepticon sword/shield set, and Nullrays.
Probably also the Rodimus guns.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 6:09 pmby alexison
Loving Goldbug, Bumper, and Hubcap…especially Bumper.
The null rays look good but I do believe they are a little long.
I have no need for the Erector really but the Hot Rod weapons look great. I am also really liking the sword and shields.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 6:11 pmby Blurrz
Oh, that's supposed to be Erector?
*whistle*
I must have misheard Renderform lolol!
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 6:14 pmby alexison
Blurrz wrote:Oh, that's supposed to be Erector?
*whistle*
I must have misheard Renderform lolol!
Hahaha
I'm still hoping he finds a way to put it on the TRU Mudflap figure.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 6:36 pmby Nemesor
Renderform's missed a trick with the null rays IMO. My biggest issue with the standard ones is that they are too big, they inhibit arm posability. Renderform's made them even bigger. They look nice, but I won't be buying any.
That said, the Melee weapons and energy shields are sweet, and hopefully I'll be able to get some, they remind me of the Brutes from WFC. Also, Bumper and Vortex heads are a must-have.
Pretty dang impressive despite my own reservations, it has to be said.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 6:57 pmby Heavy B
MUST TOUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 7:34 pmby Blackstreak
I would defintiely go for the Hot Rod guns, Ravage missiles, and seeker null rays.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 8:51 pmby GetRightRobot
I hope these upgrades are in box set. Honestly, I just cannot stand Renderforms ordering process. Some of these seem unnecessary or even unwanted. I have all the figures these upgrades are displayed with, if they come in a set, sweet, I'll buy, but I'm not jumping through hoops anymore for Venksta's stuff, even though it is a good product. Well, maybe for the Ravage missles, they are very nice.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 10:05 pmby Rated X
I love all this guys stuff. I just wish he would make it more available for people who want to buy it a year later. I got over 30 different seekers so I dont know if Im gonna jump on the null rays. Unless he makes them for Sunstorm, The Rainmakers, Purple clone, etc. But I dont think he will go that far. And exactly who is the new Grappel head supposed to be ???
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Sun Oct 16, 2011 10:05 pmby mattyc1007
Blurrz wrote:
I want that burger, how much?
It looks like pacman
Ontopic, digging the bee head molds
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 12:03 amby alexison
Rated X wrote: And exactly who is the new Grappel head supposed to be ???
amcgrath929 wrote: Erector
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 12:34 amby Joetx
I'm surprised neither Takara nor Hasbro ever thought of using either the Autobot or Deception sigils are shields. The idea was just underneath their noses.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 7:58 amby Prime Evil
Love Venksta's work, but with all the stuff coming out I'm gonna have to be picky.
No to Erector, Vortex head (I don't own that toy), Hubcap.
Yes to Bumper, Ravage+SG Ravage missiles, pick and choose on Seeker armaments, Hot Rod guns, and Hound gun.
Maybe on the sword and shields.
****'s gonna get real expensive in 2012!!
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 9:50 amby rpetras
I've been waiting a while for someone to do decent Null Rays for the seekers, but these are still too big.
I customized a few for the Screamer and Skywarp, but I still need them for the rest of the guys.
I'd rather buy them than have to build them.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 10:10 amby Prime Evil
rpetras wrote:I've been waiting a while for someone to do decent Null Rays for the seekers, but these are still too big.
I customized a few for the Screamer and Skywarp, but I still need them for the rest of the guys.
I'd rather buy them than have to build them.
You can also use the original null rays from any of the G1 seekers. They fit. I "had" them on Screamer. They looked good, but when standing next to SW and TC, they look small. Like the other two guys had more firepower and I can't have them showing up Starscream.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 11:10 amby DMSL
I already ordered the G1 Goldbug head kit for United Bee and i don't regret it, it looks brilliant.
The other stuff looks ok but not my cup of tea.
What i would like to see is a weapon kit for DOTM Roadbuster. I.e. snap-on armor and 3 guns for on the front of his carmode. In botmode the snap-on armor can become a backpack, the side guns can become like jet thrusters and the middle bumper gun could form a rifle.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 3:20 pmby Venksta
For those wanting the RFX-001 orange and red axes for the Knight Morpher Commander, along with the Sword and Shield sets, Hound gun, and HotRod guns, they will be available tomorrow night for ordering. The RFX-001 axes are limited to 150 each for orange and red. The other sets will have a limited amount available for Tuesday. I'll have more available next month, after the Goldbug kits finish shipping out.
Nemesor wrote:Renderform's missed a trick with the null rays IMO. My biggest issue with the standard ones is that they are too big, they inhibit arm posability. Renderform's made them even bigger. They look nice, but I won't be buying any.
For the "Super Nullifier"s shown above, I had a vision for a certain look, and am totally happy with how they turned out. I wanted my Starscream to have something powerful, but sort of sleek for his main weapon. I know people have wanted smaller nullrays, and there are actually quite a lot of alternatives available online, that have been around for awhile. Theres at least a couple you can get on Shapeways, and some customizers who make their own resin casted versions. So if anyone wants to replace the stock nullrays on their seekers, and wants a smaller design, you have a lot of options.
GetRightRobot wrote:I hope these upgrades are in box set. Honestly, I just cannot stand Renderforms ordering process. Some of these seem unnecessary or even unwanted. I have all the figures these upgrades are displayed with, if they come in a set, sweet, I'll buy, but I'm not jumping through hoops anymore for Venksta's stuff, even though it is a good product. Well, maybe for the Ravage missles, they are very nice.
You'd be surprised by how many people contact me and ask to make a ton of stuff. You might not need any of the new items I created, but there are a lot of people who have been wanting them. I just make what I want for myself, and if I feel producing the items, won't be too difficult, I make them available to others who might enjoy my work.
The easiest solution for ordering would be for me to sell directly to online retailers. But considering my prices are basically whole sale, you'd be paying double or more through the stores. If people would be ok with better process of ordering and paying more, I will gladly take up all the offers I've gotten from online retailers to carry my stuff. It also gives me less work to deal with customer service and processing orders myself.
Or I can make it more hard work for myself and offer them directly for cheap.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 3:49 pmby Mkall
I intend to get the long Nullray cannons for Starscream, Thundercracker and Skywarp only as they're the Big Three.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 4:09 pmby Rated X
amcgrath929 wrote:Rated X wrote: And exactly who is the new Grappel head supposed to be ???
amcgrath929 wrote: Erector
Well we all know why Erector is suddenly so popular now dont we ??? Accurate or not this set needs to come with a set of "wrecking balls" and a giant missle launching cannon for me to buy it.
As for the hound gun, Fansproject G3 trailer took care of that already. I would only pop on a more toy accurate gun if it comes with a shoulder missle launcher that actually looks good. The one hound comes with sucks, as it points downward and barely holds on.
Since Ravage comes with Hound, why not make it a set ??? The same could be done in G2 Colors for the Botcon Scorch/Ravage set.
1 gun
1 new rocket launcher
2 Ravage Missles
In addition, the Ravage missles would look better just a little bit smaller. Kind of bulky seems bigger than the G1 missles Im currently using. But I will still buy them anyways.
As for the null rays, the deal maker would be if he includes G1 style missles for the old launchers in jet mode and null rays for robot mode. In addition, a white "to be painted" set would be great for people who own the many CHMS repaints of this mold such as the Rainmakers and sunstorm.
As far as the ordering process, just fire up the old molds for new buyers and I have no problems. If we got the cash and are willing to wait 4 months, why not just hook us up ??? In the past he has expressed concerns to keep his sets rare for the benefit of collectors who want to own exclusive items. But in reality, we (collectors) live hundreds if not thousands of miles away from each other so bragging rights is pretty much thrown out the window. The friends who do get to see my collection in person have no clue which items are rare and which items came from wal-mart.
Either way I love his stuff and will continue to buy it.
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 4:10 pmby alexison
What kind of price are we looking at with these new sets Venksta?
Re: Victoria Toy Fair 2011 Coverage - Renderform
Posted:
Mon Oct 17, 2011 4:14 pmby GetRightRobot
Venksta wrote:GetRightRobot wrote:I hope these upgrades are in box set. Honestly, I just cannot stand Renderforms ordering process. Some of these seem unnecessary or even unwanted. I have all the figures these upgrades are displayed with, if they come in a set, sweet, I'll buy, but I'm not jumping through hoops anymore for Venksta's stuff, even though it is a good product. Well, maybe for the Ravage missles, they are very nice.
You'd be surprised by how many people contact me and ask to make a ton of stuff. You might not need any of the new items I created, but there are a lot of people who have been wanting them. I just make what I want for myself, and if I feel producing the items, won't be too difficult, I make them available to others who might enjoy my work.
The easiest solution for ordering would be for me to sell directly to online retailers. But considering my prices are basically whole sale, you'd be paying double or more through the stores. If people would be ok with better process of ordering and paying more, I will gladly take up all the offers I've gotten from online retailers to carry my stuff. It also gives me less work to deal with customer service and processing orders myself.
Or I can make it more hard work for myself and offer them directly for cheap.
Ah come one man, I didn't mean to sound like a dick or anything. This is just a thought, but a friend of mine started an E-Cig store with a website and online store. I helped him take photos for his product and in like 2 hours, we had over a hundred items for sale at the click of button. It's very simple. You are required to be a liscensed business and company (an LLC works fine) and that's it. If you are planning on selling to online retail websites, you would have to have these things anyways. NetworkSolutions.com is even better than GoDaddy and if you are modeling these things in Blender or AutoCAD or Maya 3DSM you, without a doubt, can handle a web page, especially a "follow the onscreen instructions" website. Christ I'll do it for you if you don't have the time. Your products rock, but you have to admit, your products are the only available that require so much.... maneuvering. And please consider a once-a-year product box set that includes one each of the Renderform offerings for 2011, 12, 13 and so on. Even if it was more expensive, I'd buy one, and I'm sure MANY others would too.