Page 1 of 1

Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 12:00 am
by El Duque
iGear have updated their facebook page with test shots of three new Seekers based on their modified MP mold. We see the recently announced Comic Ink exclusive G2 Ramjet, a dark green Seeker, and a purple translucent Seeker. Images mirrored below.


Image

Here's a few more from the weibo page of hamatoys:

Image

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 12:27 am
by Lapse Of Reason
I have no need for these, but I did recently acquire their three coneheads (Dirge, Ramjet, Thrust) and they are fantastic for a third party maker. I think my favorite is Dirge because the colors really pop.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 1:43 am
by necr0blivion
I will say I'm pleasantly surprised about a G2 Ramjet Masterpiece figure. Not at all surprised about the seeker clones, and only 50/50 on the Acid Storm version (since it's based off of a Classics figure).

I was under the impression that iGear would make their version of a Ghost Starscream, and it could still happen. But maybe it's time to move to other projects, because I already have a lot of MP Seekers/Coneheads. Course, that's like waiting for HasTak to make a new MP figure of a character that hasn't gotten the treatment yet.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 9:35 am
by Skullcrunchberries
I have to say, I like what iGear is doing with these but I'm not really interested. Just one more set for someone else to have, I suppose >:oP

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 10:06 am
by Scaleface
Air Warrior and Acidstorm?

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 10:40 am
by Rated X
Not the deco I was hoping for on Acid Storm. I wish they would have went with the deco CHMS used that was cartoon accurate.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 10:40 am
by Megatron Wolf
Ramjet is cool but im happy with my Skywarp

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 11:04 am
by Scaleface
I wish they made a Voyager sized toy.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 7:44 pm
by cannonfodder4000
Scaleface wrote:I wish they made a Voyager sized toy.


Aren't these Voyager sized? the originals were Ultra to Leader sized I think, and these have to be smaller, I might be wrong.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Sun Dec 25, 2011 7:47 pm
by LOST Cybertronian
cannonfodder4000 wrote:
Scaleface wrote:I wish they made a Voyager sized toy.


Aren't these Voyager sized? the originals were Ultra to Leader sized I think, and these have to be smaller, I might be wrong.


These are the same size as the official MP Seekers.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 11:43 am
by El Duque
iGear has posted more images and listed pre-orders for their three upcoming PP series Seekers: PP03J-G2, PP03R Rainforest, and PP03C Translucent Current. All three are listed as limited releases, and we already know that Comic Ink will have an exclusive version of the G2 Ramjet that will feature custom G2 style weapons. Images mirrored below.

Image

Image

Image

Image

Image

Image

Image

Image

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 11:59 am
by WolfDawg
I'm really digging G2 Ramjet. The others are pretty ho hum. I still don't get why they didn't give Acidstorm a deco similar to his Universe counterpart.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 12:30 pm
by Rated X
Ramjet's helmet being all black ruins the figure. Still cant see why they chose puke green for Acid Storm. Dont see the purpose in a translucent purple seeker. Skywarp's warping has always been portrayed as "clear" not purple. How about a purple clone instead ? Ive been wanting to buy at least one version of the new mold for for one of the more obscure characters, but they keep letting me down.

Acid Storm: puke green

Sunstorm: annoying red IDW fuselage

Icestorm: red dots all over his midsection

G2 Ramjet: all black helmet with no purple below the nose cone

G1 Coneheads: nose cones in jet mode are not black to match their black "nosecone helmets" in robot mode

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 12:36 pm
by BeastProwl
Rated X wrote:Ramjet's helmet being all black ruins the figure. Still cant see why they chose puke green for Acid Storm. Dont see the purpose in a translucent purple seeker. Skywarp's warping has always been portrayed as "clear" not purple. How about a purple clone instead ? Ive been wanting to buy at least one version of the new mold for for one of the more obscure characters, but they keep letting me down.

Acid Storm: puke green

Sunstorm: annoying red IDW fuselage

Icestorm: red dots all over his midsection

G2 Ramjet: all black helmet with no purple below the nose cone

G1 Coneheads: nose cones in jet mode are not black to match their black "nosecone helmets" in robot mode

I Understand alot of what your saying here. I Personally like the more realistic military green used for Acid Storm as apposed to bright popping neon green. I Don't like Icestorm or sunstorms decos either. I Don't get the point of the translucent purple seeker, aside maby as cutom fodder? That G2 paint scheme to me just seems :SICK:
In fact, Acidstorm's gotta be the only one I really like here...

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 12:49 pm
by wolverinetodd
I believe "Current" is supposed to be representing "Slipstream" of the Seekers. She was the purple seeker jet in "Transformers: Animated" whose name we learned after the series ended and was the only fembot of the group. However, from the looks of the robot mode of this possible "Slipstream," and the fact there doesn't appear to be any differences from the others, this purple translucent Seeker will be male.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 1:03 pm
by G1 Legacy
BeastProwl wrote: I Don't get the point of the translucent purple seeker, aside maby as cutom fodder?


My first thought regarding the purple transluscent seeker was as a "Unicron scanning" version just prior to being assimilated into either Cyclonus or one of the Sweeps....just my thought.

Oh and regarding the "Rainforest", I can understand why that color can turn some people off but I like the green, it looks like a realworld 80's era middle eastern or British repaint of American-Tech from that period. I wouldn't want my masterpiece to neccesarily share an identical paint scheme with it's deluxe class counterpoint etc. As discussed in a recent podcast episode the "masterpiece" quality seems to be gradually getting spread thin more and more. I have other figures higher on my want list at the moment but I wouldn't be opposed to getting a few of these in a couple of years...maybe at a Botcon dealer table lol.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 3:04 pm
by Skyfire77
G1 Legacy wrote:
BeastProwl wrote: I Don't get the point of the translucent purple seeker, aside maby as cutom fodder?


My first thought regarding the purple transluscent seeker was as a "Unicron scanning" version just prior to being assimilated into either Cyclonus or one of the Sweeps....just my thought.

Oh and regarding the "Rainforest", I can understand why that color can turn some people off but I like the green, it looks like a realworld 80's era middle eastern or British repaint of American-Tech from that period. I wouldn't want my masterpiece to neccesarily share an identical paint scheme with it's deluxe class counterpoint etc. As discussed in a recent podcast episode the "masterpiece" quality seems to be gradually getting spread thin more and more. I have other figures higher on my want list at the moment but I wouldn't be opposed to getting a few of these in a couple of years...maybe at a Botcon dealer table lol.


IMO, if it wasn't for the "Rainforest" code name, I'd think they were representing the green "Ultimate Doom" Seeker.

Image

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 3:26 pm
by Rated X
Skyfire77 wrote:
G1 Legacy wrote:
BeastProwl wrote: I Don't get the point of the translucent purple seeker, aside maby as cutom fodder?


My first thought regarding the purple transluscent seeker was as a "Unicron scanning" version just prior to being assimilated into either Cyclonus or one of the Sweeps....just my thought.

Oh and regarding the "Rainforest", I can understand why that color can turn some people off but I like the green, it looks like a realworld 80's era middle eastern or British repaint of American-Tech from that period. I wouldn't want my masterpiece to neccesarily share an identical paint scheme with it's deluxe class counterpoint etc. As discussed in a recent podcast episode the "masterpiece" quality seems to be gradually getting spread thin more and more. I have other figures higher on my want list at the moment but I wouldn't be opposed to getting a few of these in a couple of years...maybe at a Botcon dealer table lol.


IMO, if it wasn't for the "Rainforest" code name, I'd think they were representing the green "Ultimate Doom" Seeker.

Image



I can understand why people might like the green I-Gear chose, as it does look like a cold war Mig. For me personally though, it looks like puke. Plus at least the head and a few details should be done in black.

This is why I wanted the neon green cartoon accurate deco:

Image

Blacklights...no bachlor pad is complete without them ! ;)

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 3:44 pm
by Gauntlet101010
You know, there's a REAL good chance the colors will change on these on the final product, right? No sense feeling down about some of the details before we see the final product.

If I were collecting MP Seekers I'd be stoked. Although Takara's Starscream has always been a contender for Acid Storm, hasn't he? Oh, well, I guess it doesn't matter either way.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Mon Dec 26, 2011 4:16 pm
by Scaleface
I think "Current" is "Air Warrior".

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Tue Dec 27, 2011 10:08 am
by Rated X
Why is it BBTS sells everything else from I-Gear except the seekers ??? Being able to add it in my POL might tempt me to get one.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Tue Dec 27, 2011 11:23 am
by Gauntlet101010
Rated X wrote:Why is it BBTS sells everything else from I-Gear except the seekers ??? Being able to add it in my POL might tempt me to get one.

They don't seem to sell anything that approaches the KO category. I've only ever found KOs in their lots category.

But you may as well get it direct from iGear. It'd be cheaper.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Tue Dec 27, 2011 11:37 am
by Scaleface
That's probably right. BBTS isn't just another online store, they do exclusives with Hasbro, do they probably don't even want to come close to pissing them off. They recently moved all third party items to a completely seperate part of their store calling it "Transforming toys".

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Wed Dec 28, 2011 8:41 pm
by LOST Cybertronian
Gauntlet101010 wrote:But you may as well get it direct from iGear. It'd be cheaper.


When I bought the coneheads from TFSource, it was $80 cheaper for the trio than buying them from iGear.

Re: Prototype Image of iGear's Comic Ink G2 Ramjet Exclusive Plus Others

PostPosted: Thu Dec 29, 2011 3:20 am
by Dead Metal
Rated X wrote:Why is it BBTS sells everything else from I-Gear except the seekers ??? Being able to add it in my POL might tempt me to get one.

A couple years back Hasbro smacked them over the head for selling KOs.