Page 1 of 3

Have a 3rd party toy idea idea,Share it here.

PostPosted: Fri Nov 08, 2013 1:54 am
by Tsutsukakushi
Pretender Beast shell made for DOTM Universe Minicon Catilla.
http://tfwiki.net/wiki/Catilla_(DOTM)
Pretender Beast shell made for MMC Catilla http://wikialpha.org/wiki/images/d/d3/F ... erart2.jpg

Beast Wars Second Movie Majin Zarak http://tfwiki.net/wiki/Majin_Zarak Perhaps create a secondary swap out head for Tryticon,Since the beast modes look similar.

Beast Wars Neo Unicron. http://tfwiki.net/wiki/File:BWNeo-Unicron.jpg

Masterpiece Blitzwing. http://www.actionfigurepics.com/2013/03 ... -blitzwing

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sat Dec 07, 2013 10:29 am
by Stormrider
Is this a thread about 3rd party figures that we would like to see? If so my list:

Apeface
Snapdragon
Squeezeplay
Doublecross
Repugnus
Grotesque

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sat Dec 07, 2013 10:36 am
by Rated X
Classics style heads with noses and serious mouths to turn TF Prime/Animated molds into classics characters. Im specifically referring to the TFCC and Botcon figures that didn't get a new head, just a repaint of an ugly cartoony head. (Jackpot, Barricade) I firmly believe TFCC meant these to be "classics" figures but their budget issues prevent all their figures from getting new heads. And even though Slipstream got a new head, they made it too damn cartoony. I want one without the stupid pointy chin.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sat Dec 07, 2013 11:07 am
by guarayakha
3rd Party wishlist?

MP LioKaiser to scale with MP Starsaber =P~
http://transformerscharacters.net/2012/ ... -the-week/

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sat Dec 07, 2013 11:37 am
by synapse
IDW's Rung and Pharma.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sat Dec 07, 2013 9:34 pm
by xyl360
I've said it before and I'll say it again: BEAST WARS!!!

The third parties are beating G1/Classics to death. Time for a new continuity.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sun Dec 08, 2013 9:54 am
by TheGrognard
More fembots that aren't versions of Arcee and Blackarachnia.

Fembot combiner!

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sun Dec 08, 2013 5:11 pm
by Rumblebee357
Trypticon
Trypticon
Trypticon lol! and
Dai Atlas
Alpha Trion

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sun Dec 08, 2013 5:51 pm
by TheGrognard
Rumblebee357 wrote:Trypticon
Trypticon
Trypticon lol! and
Dai Atlas
Alpha Trion


I like your first three ideas!

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Sun Dec 08, 2013 6:19 pm
by Ginrai Minor
Horrorcons
Targetmastetrs(Japanese trilogy)
Starsaber
Victory Leo
Leokiaser
Raiden
Galvatron

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 10:22 am
by Crosscheck
How about a straight up clone of Generations Metroplex's rifle for those that got the retail version and want a second rifle?

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 12:26 pm
by Rated X
xyl360 wrote:I've said it before and I'll say it again: BEAST WARS!!!

The third parties are beating G1/Classics to death. Time for a new continuity.



I'm starting to get into Beast Wars myself. I just got a Cheetor on e-bay. With the new Rhinox, Waspinator, and the rumored Ratrap down the line, I think we should give Hasbro a chance before calling on third party companies to fill the gaps at huge prices. CGI graphics shows don't have a whole lot of characters to begin with so I'm sure Hasbro will pump out the entire season one cast within a couple years. (like they did with TF Prime) I'm also worried that 3rd parties might try to incorporate real "fur" to make the beast modes more lifelike. The thought of cuddly Transformers to me is just plain scary. :shock:

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 1:22 pm
by TheGrognard
non-Pretender Monstructor

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 3:01 pm
by xyl360
Rated X wrote:
xyl360 wrote:I've said it before and I'll say it again: BEAST WARS!!!

The third parties are beating G1/Classics to death. Time for a new continuity.



I'm starting to get into Beast Wars myself. I just got a Cheetor on e-bay. With the new Rhinox, Waspinator, and the rumored Ratrap down the line, I think we should give Hasbro a chance before calling on third party companies to fill the gaps at huge prices. CGI graphics shows don't have a whole lot of characters to begin with so I'm sure Hasbro will pump out the entire season one cast within a couple years. (like they did with TF Prime) I'm also worried that 3rd parties might try to incorporate real "fur" to make the beast modes more lifelike. The thought of cuddly Transformers to me is just plain scary. :shock:

:lol: did you know that there's actually 1 Transformer that actually does have hair? No surprise, it's a Beast Wars figure:
Image
That tail is actual doll hair. Pretty crazy, right?

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 5:54 pm
by Rated X
xyl360 wrote:
Rated X wrote:
xyl360 wrote:I've said it before and I'll say it again: BEAST WARS!!!

The third parties are beating G1/Classics to death. Time for a new continuity.



I'm starting to get into Beast Wars myself. I just got a Cheetor on e-bay. With the new Rhinox, Waspinator, and the rumored Ratrap down the line, I think we should give Hasbro a chance before calling on third party companies to fill the gaps at huge prices. CGI graphics shows don't have a whole lot of characters to begin with so I'm sure Hasbro will pump out the entire season one cast within a couple years. (like they did with TF Prime) I'm also worried that 3rd parties might try to incorporate real "fur" to make the beast modes more lifelike. The thought of cuddly Transformers to me is just plain scary. :shock:

:lol: did you know that there's actually 1 Transformer that actually does have hair? No surprise, it's a Beast Wars figure:
Image
That tail is actual doll hair. Pretty crazy, right?



Oh no, Im gonna have nightmares of a pink MLP repaint !!! :lol:


You ever seen this ?

http://www.youtube.com/watch?v=l4tx0EXq5-g

He did an awesome job, but damn it looks scary...

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 5:57 pm
by craggy
Rumblebee357 wrote:Trypticon lol!

is he some Japanese version, like Transformers Go! ;)

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 7:06 pm
by Tsutsukakushi
Rated X wrote:
xyl360 wrote:I've said it before and I'll say it again: BEAST WARS!!!

The third parties are beating G1/Classics to death. Time for a new continuity.



I'm starting to get into Beast Wars myself. I just got a Cheetor on e-bay. With the new Rhinox, Waspinator, and the rumored Ratrap down the line, I think we should give Hasbro a chance before calling on third party companies to fill the gaps at huge prices. CGI graphics shows don't have a whole lot of characters to begin with so I'm sure Hasbro will pump out the entire season one cast within a couple years. (like they did with TF Prime) I'm also worried that 3rd parties might try to incorporate real "fur" to make the beast modes more lifelike. The thought of cuddly Transformers to me is just plain scary. :shock:


How about using the thick,rugged plastic sculpted fur like the 1988 Animal pretenders used & what Beast Wars II Lio Convoy used.

If 3rd party companies start doing Beast Wars toy. The problems will arise within the fandom as to what correct scale these toys should be. Ideally they should be Legion of Commander size to be in proper cartoon scale but I know nobody wants this. I don't have a problem with the toys being Voyager or Leader sized,I kow other fans will complain to no end about this. Beast Wars II Lio Convoy,BW Megatron & BW Optimus Primal should get Eight or Nine inch 3rd party toys. While other Characters like Tigatron should get Voyager sized toys. I'd prefer these be billed as Masterpiece BW 3rd party toys so they can be a bit bigger in scale. If there billed as classics 3rd party toys,they'd have to be smaller,Which is something I just wouldn't buy into.

TheGrognard wrote:non-Pretender Monstructor


I suspose Some 3rd party company could create this idea. Then another 3rd party company can swoop in & create the Pretender shells for these toys. Maybe even find a way to make the pretender shells combine into a pretender Monstructor. While there at it,they can create another set of Dinosaurs Pretender shells for these toys.
I'd love to also see the Dinosaurs shells combine to form a pretender combiner.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 8:29 pm
by Mkall
I'd love to see the Monsterbots.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 10:18 pm
by xyl360
Rated X wrote:
xyl360 wrote:
Rated X wrote:
xyl360 wrote:I've said it before and I'll say it again: BEAST WARS!!!

The third parties are beating G1/Classics to death. Time for a new continuity.



I'm starting to get into Beast Wars myself. I just got a Cheetor on e-bay. With the new Rhinox, Waspinator, and the rumored Ratrap down the line, I think we should give Hasbro a chance before calling on third party companies to fill the gaps at huge prices. CGI graphics shows don't have a whole lot of characters to begin with so I'm sure Hasbro will pump out the entire season one cast within a couple years. (like they did with TF Prime) I'm also worried that 3rd parties might try to incorporate real "fur" to make the beast modes more lifelike. The thought of cuddly Transformers to me is just plain scary. :shock:

:lol: did you know that there's actually 1 Transformer that actually does have hair? No surprise, it's a Beast Wars figure:
Image
That tail is actual doll hair. Pretty crazy, right?



Oh no, Im gonna have nightmares of a pink MLP repaint !!! :lol:


You ever seen this ?

http://www.youtube.com/watch?v=l4tx0EXq5-g

He did an awesome job, but damn it looks scary...

Hehe, yep, I've seen that custom. It's pretty hardcore.

As for 3rd party items I'd like to see, I too would like Trypticon, however not specifically a Classics/Generations Trypticon. Instead, I want Planet X to do a WfC Trypticon :). That's not to say I wouldn't love to see both types of Trypticons because I would and I'd totally buy both versions :P.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 10:41 pm
by xyl360
Oh, and I know others have mentioned this before, but Gobots. Seriously. That would be AWESOME :D!

I'd kill for a proper "Classics" style Cy-Kill :P.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Mon Dec 09, 2013 10:49 pm
by Rated X
Of course I would prefer a Generations Trypticon, but I would gladly buy an FOC one because it's freakin Trypticon. I just hope he doesn't turn into a giant satellite looking thing like Genesis. I have no clue what he transforms into in the game.

Another idea I would like to see is something really simple. Probally a part Dr. Wu could pull off. Now that I have Toyworld Orion, I would love to see a simple piece that slides between the split chest and makes it look more G1. A simple front window with a red post in the middle that could be used for both robot and truck modes. It would slide right in from the top and you can push it out from the bottom during transformation. That would be awesome !

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Tue Dec 10, 2013 2:20 am
by Tsutsukakushi
Rated X wrote:Of course I would prefer a Generations Trypticon, but I would gladly buy an FOC one because it's freakin Trypticon. I just hope he doesn't turn into a giant satellite looking thing like Genesis. I have no clue what he transforms into in the game.

Another idea I would like to see is something really simple. Probally a part Dr. Wu could pull off. Now that I have Toyworld Orion, I would love to see a simple piece that slides between the split chest and makes it look more G1. A simple front window with a red post in the middle that could be used for both robot and truck modes. It would slide right in from the top and you can push it out from the bottom during transformation. That would be awesome !


In the FOC Video game Megatron found a damaged Trypticon & turned him into the Nemesis warlord space ship that we see in the TF Prime cartoon series. I'd buy a 3rd party FOC Trypticon that could transform from a T-rex then into a Nemesis warlord space ship.

I think That toyworld Orion Pax needs a alternate head with a face plate.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Thu Dec 12, 2013 2:34 am
by Tsutsukakushi
I'd like to see a 3rd party company create a Deluxe sized BH Hun-gurr that can combine with the other Four legion sized legs & arms Terrorcons. This at the very least will turn the current Hasbro 5.5 Inch BH Abonimus into a Eight inch sized combiner. This would be similar to the 1987 Abonimus toy scale.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Fri Dec 13, 2013 10:08 pm
by Scaleface
I would love to see Target masters of Knock and Skar for Doubledealer.

Re: Have a 3rd party toy idea idea,Share it here.

PostPosted: Thu Dec 19, 2013 2:40 pm
by Tsutsukakushi
I'd love to see a chest wing attachment add on piece for Energon Movie Bruticus Maximus. the 3rd party chest wing can plug into the circle hole spark where the energon spark crystals went. FP Should have done this a long time ago when they created the different team members & combiners parts. It's still not too late,they can always still do this. creating a chest wing for Bruticus would make it look complete & more Generation one.

What does everyone think of this idea. Can someone please email,twitter or facebook this idea to FP or another 3rd party company.