IncrediPlugs (CW Extended)
Posted: Wed May 27, 2015 10:55 pmIncrediPlugs Presents: SweeperPlugs!
Sweeper Shoulder Joint
Sweeper Knee Connector
Sweeper Limb Binder
SweeperPLugs can be used with Gen Scourge, making it suitable to be used as limbs. However, Scourge figures are looser than standard figures that are designed to combine. So, the combiner is a bit fiddly, and unstable. However, you can see what is possible, given patience, and balancing it correctly. Of course available colors for the Sweeper plugs are blue, light silver, neon yellow, and black.
CLEAN SWEEP SET includes:
2 Sweeper Shoulder Joints, 2 Sweeper Knee Connectors, and 4 Sweep Limb binders
Price $30, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.
Please send your orders with your address, and color choice to scoffer75@gmail.com
**Once received, I will then send you the proper Paypal account to make payment to.
IncrediPlugs Presents: The BrutePlug!
BrutePlug can be used with FOC limbs. Of course available colors are blue, light silver, neon yellow, and black.
Set of 4 Brute plugs will be $20, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.
Please send your orders with your address, and color choice to scoffer75@gmail.com . I will then send you the proper Paypal account to make payment to.
IncrediPlugs Introduces***QuadPlay Ports!***
For use with the CW Motormaster / Ultra Prime mold
Simply fit the two above pieces around Motormasters thigh, and click them into place! You can then connect any CW limb into the provided port!
Price for a pair of left, and right ports is $10, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.
Please send your orders to: scoffer75@gmail.com. I will then send you the separate paypal account identifier to send payment to.
You may also like...
***IncrediPlugs!***
Would you like more options for your CW main bodies to merge with? Many of us collectors still have good previous series of TFs that we have relagated to storage. Specifically, there are unused combiner limbs, and drones just sitting around going to waste. There is no need for this.
Introducing IncrediPlugs! The IncrediPlug will allow you the value added joy of new combination possibilities by merging current line figures with figures that you have already invested in. Additionally, the IncrediPlug also has a 5mm port that will allow you to attach some smaller robots as weapons.
Note: IncrediPlug Classic will allow a CW body to merge with EP drones, Wing Saber, as well as E combiner limbs. It has full swivel articulation for the shoulders, but in the case of the drones, and Wing Saber, will not bend at the knee. However, the new IncrediKnee will!
Current Version of IncrediPlug Classic:
And Now Introducing the IncrediKnee!
This special plug allow the Knees to bend when using Drones, and / or Wing Saber
Note: it is recommended that you get the IncrediHeel to correct for balance issues when using Wing Saber as limbs
Current available colors:
Silver, Blue, Black, or Neon Yellow
The prices are:
Classic Pack
Set of 4 IncrediPlug Classics = $25
---
Full Limb Pack
Set of 2 IncrediPlug Classics + 2 IncrediKnees = $32.50
---
Ballance Pack
Set of 2 IncrediPlug Classics + 2 IncrediKnees + 2 IncrediHeels = $40.50
If you wish to purchase single pieces, the prices are:
1 IncrediPlug Classic = $7.50
1 IncrediKnee = $12.50
1 IncrediHeel = $5.00
Shipping and handling on all continental U.S. non-large orders = $5.95 USPS
For very large, or international orders, the shipping cost will be more.
Additionally, I am offering a separate "Limb as Weapon" IncrediPlug (LaW-IncrediPlug) that will allow for Energon Combiner limbs to be attached as weapons when the blue sections of Wingsaber are in arm mode. (note: *Please do not use a normal version IncrediPlug in this way (backwards). They are not designed for it, and may get stuck!*)
These LaW-IncrediPlugs are $5 a piece.
Note, and Reasoning for Prices: It takes a fair amount of cost to get started with a 3D printer, and maintain equipment. Not only is there the cost of the ABS plastic (plus shipping), but the power it takes to heat the plastic to 240 C, and keep the motors spinning. For instance, it takes roughly 2 hours to print one complete knee joint, then there is the labor of cleaning off the support plastic attached, trimming, and sanding before assembly. There is also the cost of the specialty screws, and springs with their shipping, depending on the quantity that is ordered. Also, while it is enjoyable to learn, it takes a lot of research, measuring, trial, and error to get things exactly right with the 3D model, and how those measurements translate into the plastic that the printer prints. You have to learn what makes things weak, or strong in a print. Something that measures one way on the computer, may end up with a different dimension in the print. I have a lot of scrap plastic that tells the tale of this trial, and error testing, all the way up to the success of the released models. The original IncrediPlug Classic is likely underpriced, but I wanted to use is as a learning tool, and test, and I thank those who Beta tested for me. It is my pleasure to create, and bring you the products that you want, and I try to make prices fair.
-----
And here is Ultra Prime with all current IncrediPlug models.
Please send your questions, or orders to: scoffer75@gmail.com. I will then send you the separate paypal account identifier to send payment to. Of course, I will answer questions here also.
Thank You very much!
-----------------
The bellow photos are using an earlier version of the IncrediPlug without the 5 mm small robot port, but the CW to E functionality is the same. New orders will include the 5mm port on the normal IncrediPlug.
***When hooking 3rd Party TFC limbs to an IncrediPlug, use extra care. The ratcheting joints on my TFC Uranos are extremely tight, and will cause extra strain on the IncrediPlug, like if you are bending the TFC's knee joint.
Necessary legal disclaimer: This is an adult collectors item for ages 16, and up. It is not for children bellow that age. This seller is not liable for any damages to any possession of the buyer. By purchasing these items from this seller, the buyer agrees, and consents to total responsibility, and liability for the buyer's self, the buyer's possessions, anyone who the buyer allows access to the purchased piece, or pieces, or any possession of anyone the buyer allows access to the purchased piece, or pieces, should damage occur to any possession, or property due to the purchased item(s). Or, as with all things that you care about, be careful.
Sweeper Shoulder Joint
Sweeper Knee Connector
Sweeper Limb Binder
SweeperPLugs can be used with Gen Scourge, making it suitable to be used as limbs. However, Scourge figures are looser than standard figures that are designed to combine. So, the combiner is a bit fiddly, and unstable. However, you can see what is possible, given patience, and balancing it correctly. Of course available colors for the Sweeper plugs are blue, light silver, neon yellow, and black.
CLEAN SWEEP SET includes:
2 Sweeper Shoulder Joints, 2 Sweeper Knee Connectors, and 4 Sweep Limb binders
Price $30, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.
Please send your orders with your address, and color choice to scoffer75@gmail.com
**Once received, I will then send you the proper Paypal account to make payment to.
IncrediPlugs Presents: The BrutePlug!
BrutePlug can be used with FOC limbs. Of course available colors are blue, light silver, neon yellow, and black.
Set of 4 Brute plugs will be $20, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.
Please send your orders with your address, and color choice to scoffer75@gmail.com . I will then send you the proper Paypal account to make payment to.
IncrediPlugs Introduces***QuadPlay Ports!***
For use with the CW Motormaster / Ultra Prime mold
Simply fit the two above pieces around Motormasters thigh, and click them into place! You can then connect any CW limb into the provided port!
Price for a pair of left, and right ports is $10, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.
Please send your orders to: scoffer75@gmail.com. I will then send you the separate paypal account identifier to send payment to.
You may also like...
***IncrediPlugs!***
Would you like more options for your CW main bodies to merge with? Many of us collectors still have good previous series of TFs that we have relagated to storage. Specifically, there are unused combiner limbs, and drones just sitting around going to waste. There is no need for this.
Introducing IncrediPlugs! The IncrediPlug will allow you the value added joy of new combination possibilities by merging current line figures with figures that you have already invested in. Additionally, the IncrediPlug also has a 5mm port that will allow you to attach some smaller robots as weapons.
Note: IncrediPlug Classic will allow a CW body to merge with EP drones, Wing Saber, as well as E combiner limbs. It has full swivel articulation for the shoulders, but in the case of the drones, and Wing Saber, will not bend at the knee. However, the new IncrediKnee will!
Current Version of IncrediPlug Classic:
And Now Introducing the IncrediKnee!
This special plug allow the Knees to bend when using Drones, and / or Wing Saber
Note: it is recommended that you get the IncrediHeel to correct for balance issues when using Wing Saber as limbs
Current available colors:
Silver, Blue, Black, or Neon Yellow
The prices are:
Classic Pack
Set of 4 IncrediPlug Classics = $25
---
Full Limb Pack
Set of 2 IncrediPlug Classics + 2 IncrediKnees = $32.50
---
Ballance Pack
Set of 2 IncrediPlug Classics + 2 IncrediKnees + 2 IncrediHeels = $40.50
If you wish to purchase single pieces, the prices are:
1 IncrediPlug Classic = $7.50
1 IncrediKnee = $12.50
1 IncrediHeel = $5.00
Shipping and handling on all continental U.S. non-large orders = $5.95 USPS
For very large, or international orders, the shipping cost will be more.
Additionally, I am offering a separate "Limb as Weapon" IncrediPlug (LaW-IncrediPlug) that will allow for Energon Combiner limbs to be attached as weapons when the blue sections of Wingsaber are in arm mode. (note: *Please do not use a normal version IncrediPlug in this way (backwards). They are not designed for it, and may get stuck!*)
These LaW-IncrediPlugs are $5 a piece.
Note, and Reasoning for Prices: It takes a fair amount of cost to get started with a 3D printer, and maintain equipment. Not only is there the cost of the ABS plastic (plus shipping), but the power it takes to heat the plastic to 240 C, and keep the motors spinning. For instance, it takes roughly 2 hours to print one complete knee joint, then there is the labor of cleaning off the support plastic attached, trimming, and sanding before assembly. There is also the cost of the specialty screws, and springs with their shipping, depending on the quantity that is ordered. Also, while it is enjoyable to learn, it takes a lot of research, measuring, trial, and error to get things exactly right with the 3D model, and how those measurements translate into the plastic that the printer prints. You have to learn what makes things weak, or strong in a print. Something that measures one way on the computer, may end up with a different dimension in the print. I have a lot of scrap plastic that tells the tale of this trial, and error testing, all the way up to the success of the released models. The original IncrediPlug Classic is likely underpriced, but I wanted to use is as a learning tool, and test, and I thank those who Beta tested for me. It is my pleasure to create, and bring you the products that you want, and I try to make prices fair.
-----
And here is Ultra Prime with all current IncrediPlug models.
Please send your questions, or orders to: scoffer75@gmail.com. I will then send you the separate paypal account identifier to send payment to. Of course, I will answer questions here also.
Thank You very much!
-----------------
The bellow photos are using an earlier version of the IncrediPlug without the 5 mm small robot port, but the CW to E functionality is the same. New orders will include the 5mm port on the normal IncrediPlug.
***When hooking 3rd Party TFC limbs to an IncrediPlug, use extra care. The ratcheting joints on my TFC Uranos are extremely tight, and will cause extra strain on the IncrediPlug, like if you are bending the TFC's knee joint.
Necessary legal disclaimer: This is an adult collectors item for ages 16, and up. It is not for children bellow that age. This seller is not liable for any damages to any possession of the buyer. By purchasing these items from this seller, the buyer agrees, and consents to total responsibility, and liability for the buyer's self, the buyer's possessions, anyone who the buyer allows access to the purchased piece, or pieces, or any possession of anyone the buyer allows access to the purchased piece, or pieces, should damage occur to any possession, or property due to the purchased item(s). Or, as with all things that you care about, be careful.
