Page 483 of 624

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 12:05 pm
by chuckdawg1999
I have Red Alert and Ratchet and they're just as good as the original use of the molds if not better like in Ratchet's case. I was giving Hasbro a lot of slack with Slamdance because I liked the blue on Rain Dance, but if they can't even make sure a repaint in a set is 100% then there's a problem. Mine will be here tomorrow so we'll see.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 12:07 pm
by Microbot
My Red Alert has his right fist positioned backward... :evil: :evil:

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 1:23 pm
by RodimusConvoy13
Fun with a flight stand.

Image

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 1:25 pm
by william-james88
RodimusConvoy13 wrote:Fun with a flight stand.

Image


Does TC have decepticon symbols in his inner wings like Starscream?

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 1:32 pm
by RodimusConvoy13
william-james88 wrote:
RodimusConvoy13 wrote:Fun with a flight stand.

Image


Does TC have decepticon symbols in his inner wings like Starscream?


He does not. I was surprised by that.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 1:43 pm
by Flashwave
Umm, Eek? I transformed my Slamdance a few times last night and didnt notice any breakage, although there is a hitch in his leg trying to bend his foot, it could be related? Maybe there is flash in a joint and the tension is giving at the soft plastic arounf the metal pin?

*Carefully putsSlamdance on a shelf and never touches him again*

On a related note, I am now so torn about G2 Sideswipe. This is my first expsrience with the mold and I *Like* it but I'm not sure I *love* it. I am tempted to sell mine, but I think I want to see if the 3P guys do any Guns and the Bandolier. I wish we knew if there was a Sunstreaker coming for Siege2, I *might* be more inclined to circle back for Swipe then.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 5:07 pm
by Unicron Magnus
I think I'd actually be interested in the Seeker mold if it didn't have the fake F-15 cockpit slapped on the chest/plane rear. That's one thing that's always bugged me about "Cybertronian-mode" designs, the fake Earth-mode chunks slapped on, and "faux-parts" are already something I can't stand. This line seems to avoid that, for the most part.

(On that note, when was the last time we got a G1 Starscream that had an actual cockpit-chest? The Legends figure? And that's not even addressing the chest turbines, which I believe only the Masterpiece ever had actually folding up.) I don't mind Siegescream's chest turbines, since they could be interpreted as engines.

I know I'm nitpicking about a-million-and-a-half times too hard right now, but I wish that the seeker mold chest actually looked like something that could be the rear of a spaceship, even if that's not slavishly G1 enough.

I have literally no idea why I ranted so hard about this, but I'm really picky about G1 Starscreams for some reason.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 5:11 pm
by Stargrave
Unicron Magnus wrote:I think I'd actually be interested in the Seeker mold if it didn't have the fake F-15 cockpit slapped on the chest/plane rear. That's one thing that's always bugged me about "Cybertronian-mode" designs, the fake Earth-mode chunks slapped on, and "faux-parts" are already something I can't stand. This line seems to avoid that, for the most part.

(On that note, when was the last time we got a G1 Starscream that had an actual cockpit-chest? The Legends figure? And that's not even addressing the chest turbines, which I believe only the Masterpiece ever had actually folding up.) I don't mind Siegescream's chest turbines, since they could be interpreted as engines.

I know I'm nitpicking about a-million-and-a-half times too hard right now, but I wish that the seeker mold chest actually looked like something that could be the rear of a spaceship, even if that's not slavishly G1 enough.

I have literally no idea why I ranted so hard about this, but I'm really picky about G1 Starscreams for some reason.


Dude it’s cool, you’re in the right place. Starscream appreciators welcome :lol:

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 6:18 pm
by grimdragon2001
i got lucky with mine, no breaks

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 7:17 pm
by Triggerdick Megatron
"Transformers Generations War for Cybertron Deluxe WFC-S26 Autobot Alphastrike Counterforce 3 Pack - Final Strike Figure Series: Part 1."

The longest name for anything ever!

"Power of the Primes Optimal Optimus" and "Studio Series Bumblebee Optimus Prime" are rather short in comparison. :)

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 7:38 pm
by Sabrblade
Triggerdick Megatron wrote:"Transformers Generations War for Cybertron Deluxe WFC-S26 Autobot Alphastrike Counterforce 3 Pack - Final Strike Figure Series: Part 1."

The longest name for anything ever!

"Power of the Primes Optimal Optimus" and "Studio Series Bumblebee Optimus Prime" are rather short in comparison. :)
"Hasbro, Inc. Transformers Generations Combiner Wars Leader class Ultra Magnus Duly Appointed Enforcer of the Tyrest Accord (with Minimus Ambus)". :P

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 7:40 pm
by o.supreme
Just found Siege Jetfire at the larger Walmart in my area, the one I expected it to be at, if any store in my area were to get them. Thanks to Rodimus Prime for the tip to look in the Jurassic Park section ;)^ . This is the same store I've often criticized for going overboard with anti-theft devices (all their reissue Optimus Primes and Siege leaders have them) Oddly enough, Jetfire did not....

This doesn't happen often, but it was a little uncomfortable seeing my wife's eyes widen when she saw the price at checkout, probably should have explained that ahead of time :oops: .....(I usually do, just somehow forgot...), but that's OK, my work bonus next week should more then compensate

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 9:07 pm
by TFanPage101
I think everyone needs to contact Hasbro on this and set a recall, because there's no way it should be like that.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 10:03 pm
by william-james88
Unicron Magnus wrote:I think I'd actually be interested in the Seeker mold if it didn't have the fake F-15 cockpit slapped on the chest/plane rear. That's one thing that's always bugged me about "Cybertronian-mode" designs, the fake Earth-mode chunks slapped on, and "faux-parts" are already something I can't stand. This line seems to avoid that, for the most part.

(On that note, when was the last time we got a G1 Starscream that had an actual cockpit-chest? The Legends figure?.

We had a real cockpit chest G1 starscream in the cyberbattalion series from a couple years ago. Plus the combiner starscream uses a real cockpit in combined mode, which I found fun.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 10:30 pm
by matthewrex
Got my Slamdance and Skywarp sets in yesterday. Thankfully I'm not having the Slamdance ankle issue. Really cool sets overall! The Seeker collection is so cool. 7 of them all lined up!

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Fri Aug 16, 2019 11:04 pm
by Emerje
My Counterstrike sets finally shipped from Amazon, should be here Saturday.

Emerje

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 1:27 am
by -Kanrabat-
About Amazon's Slamdance, don't tell me it's GPS 2.0? :shock:

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 4:15 am
by Unicron Magnus
Seems like the Skytread mold is the real dud of this line, between this and the issues on the tank. Shame, because I feel like the Duocons are a neat concept.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 7:26 am
by sol magnus
Skywarp arrives TODAY! Not Monday as initially reported.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 7:42 am
by Vic Zanzibar
Unicron Magnus wrote:Seems like the Skytread mold is the real dud of this line, between this and the issues on the tank. Shame, because I feel like the Duocons are a neat concept.

The mold looks quite nice in robot mode though so even the dud of the line has merit. While I’m impressed that they made a rather aesthetic deluxe size robot mode Duocon, the Duocon gimmick probably needs to be applied to the voyager class to get decent vehicle modes out of it.

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 11:18 am
by Sentinel_Primal
I still wish that we had gotten little robot modes for the vehicles. Yeah, it would have been an engineering nightmare when it comes to the jet and probably would have resulted in Skytread not being released in this line due to the legends class being replaced, but I'd rather he match Battletrap's new gimmick from POTP because I feel like that added something new to the duocons

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 11:52 am
by Jelze Bunnycat
-Kanrabat- wrote:About Amazon's Slamdance, don't tell me it's GPS 2.0? :shock:


*takes a deep breath preparing to scream*

No, it's not. It's a tension related break, as described in the article as a really tight joint. That's a red flag right there, an overly tight joint means there's too much friction in a certain spot and the force required to move causes any weaker spots to give.

My Skytread has a similar issue (that left joint being tighter than the right, but not to the point of jamming), so it may be a tolerance issue with the mold itself, coupled with the plastic used. A bit disheartening, I was looking forward to getting him :(

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 12:41 pm
by SGMLordMirage
Finally got lucky and found the Seeker set at a local Target here in Virginia.

SGM

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 1:00 pm
by sol magnus
SGMLordMirage wrote:Finally got lucky and found the Seeker set at a local Target here in Virginia.

SGM

Nice. They're up the road in Maryland, too. Looks like I'm going to pass on them, but I still think they're great!

In other news, my Skywarp just hit the Amazon pick up box!

Re: Transformers War for Cybertron: Siege Discussion Thread

PostPosted: Sat Aug 17, 2019 3:09 pm
by Unicron Magnus
Vic Zanzibar wrote:
Unicron Magnus wrote:Seems like the Skytread mold is the real dud of this line, between this and the issues on the tank. Shame, because I feel like the Duocons are a neat concept.

The mold looks quite nice in robot mode though so even the dud of the line has merit. While I’m impressed that they made a rather aesthetic deluxe size robot mode Duocon, the Duocon gimmick probably needs to be applied to the voyager class to get decent vehicle modes out of it.

I'm alright with the current vehicles, but it's disappointing that the tank can't peg together fully without having to trim down the plastic.

(Edit: does Slamdance have the same problems? Or just the ankle?)