Page 52 of 53

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Nov 26, 2015 9:11 pm
by william-james88
I know Decepticon Sunstorm, I didnt take it meaning anything else :) And I feel the same way. The idea here is not that these must be bought on site to finish a classic collection but rather for those who couldnt get the SDCC toys or didnt want to pay the high price tag (like myself).

So this set is two things to me:

1. A barely there placeholder for Classics Dinobots

2. An opportunity to get a whole set of the SDCC Dinos, including Slog, for cheaper and with exclusive heads.

And like I said, these toys might not be the dinos we want but hey are still beautiful looking toys.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Nov 26, 2015 9:17 pm
by Autobot N
william-james88 wrote:I know Decepticon Sunstorm, I didnt take it meaning anything else :) And I feel the same way. The idea here is not that these must be bought on site to finish a classic collection but rather for those who couldnt get the SDCC toys or didnt want to pay the high price tag (like myself).

So this set is two things to me:

1. A barely there placeholder for Classics Dinobots

2. An opportunity to get a whole set of the SDCC Dinos, including Slog, for cheaper and with exclusive heads.

And like I said, these toys might not be the dinos we want but hey are still beautiful looking toys.

Yeah, these Dinobots do look pretty good (except for the aforementioned Grimlock), though I do wish some G1-accurate Dinos were in my price range. And while I hope to pick these up at some point (provided I have extra money and no other things to get), I'm not going to deliberately search them out, as I do already have some Dinobots in my collection (the FOC Grimlock and the AOE Dinobots, minus Slog and Snarl).

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Nov 26, 2015 9:50 pm
by william-james88
Decepticon Sunstorm wrote:I do wish some G1-accurate Dinos were in my price range.


To be fair, a truly accurate G1 dino would have a copyright of Hasbro/Takara on them, just like the G1 toys had ;)

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Nov 26, 2015 9:54 pm
by fenrir72
william-james88 wrote:
Decepticon Sunstorm wrote:I do wish some G1-accurate Dinos were in my price range.


To be fair, a truly accurate G1 dino would have a copyright of Hasbro/Takara on them, just like the G1 toys had ;)


Not anymore mi amigo! Them bigbad KO makers from China got that in their corner. Only way you can tell is if you eyeball it personally.

Going rate for a boxed G1 JP Grimlock in Japan runs around 40000Y up

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Nov 26, 2015 10:04 pm
by william-james88
fenrir72 wrote:
william-james88 wrote:
Decepticon Sunstorm wrote:I do wish some G1-accurate Dinos were in my price range.


To be fair, a truly accurate G1 dino would have a copyright of Hasbro/Takara on them, just like the G1 toys had ;)


Not anymore mi amigo! Them bigbad KO makers from China got that in their corner. Only way you can tell is if you eyeball it personally.

Going rate for a boxed G1 JP Grimlock in Japan runs around 40000Y up


It was a joke, Tonto. And I wanst referring to the G1 molds. I said that a Classics Dinobot toy that would truly a homage to G1 would also have that copyright (aka not be a third party).

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Nov 26, 2015 11:08 pm
by fenrir72
william-james88 wrote:
fenrir72 wrote:
william-james88 wrote:
Decepticon Sunstorm wrote:I do wish some G1-accurate Dinos were in my price range.


To be fair, a truly accurate G1 dino would have a copyright of Hasbro/Takara on them, just like the G1 toys had ;)


Not anymore mi amigo! Them bigbad KO makers from China got that in their corner. Only way you can tell is if you eyeball it personally.

Going rate for a boxed G1 JP Grimlock in Japan runs around 40000Y up


It was a joke, Tonto. And I wanst referring to the G1 molds. I said that a Classics Dinobot toy that would truly a homage to G1 would also have that copyright (aka not be a third party).


Many pardons kimosabe :-P Heigh hoo Silver............ :lol:

Re: Written Review of Generations Platinum Dinobots Set (classic heads): Deco and QC issues breakdow

PostPosted: Thu Nov 26, 2015 11:27 pm
by fenrir72
william-james88 wrote:While the Platinum Dinobots set is still unavailable in the US, it has been available in other territories for a while, including Canada. It is even on sale at the time of writing this article at 100$ cdn (75$ US) at its exclusive retailer Toysrus. While it is unavailable online, there are still several boxes found in stores scanning the same discount (even if the price tag has not been changed).

Since I bought one set and had some problems with it, I wished to make a quick review on some points regarding this set going through each dinobot. Images of this Generations set, like the one below, can be found here.

Image

The main difference is the inclusion of the new classic styled G1 heads and that all five Dinobots being there at once (Slog had to be ordered off Amazon to complete the SDCC set) but there are other deco differences. In general, this Platinum Generations Dinobot set has less colour than the SDCC set except for the first one I will mention.


Slog:

Aside from the head, there is no visible difference between the deco of this release and the Amazon exclusive G1 deco release. I feel the plastic dino belly flap is improved simply by being positioned better in the box, which avoids creating unnecessary angles that go against the intended shape of the flap.


Strafe:

No picture has done this new head justice. He actually has a very long crest along his moving well past his head on from the front to the back (with the back being much longer). As for deco, the only paint on his arms is the yellow that appeared on the SDCC version (no green) and the back of the wings have nothing on them aside from the layer of chrome. There are differences in where the paint is applied on the chest where the Generations Platinum version has four dark grey/black triangles painted. What I find funny about the cover art is how toy accurate it is, and even includes the tails curved the same direction (a flaw still not corrected in this release), while the back shows a version of the toy with the tails pointing the right way.

Image

Image

Image


Grimlock:

This toy has some major quality issues. The robot forearms and shoulders split, where the molded halves connect, whenever they ate rotated. This can happen on either side or both (I returned a set for Grimlock and Slug and thus held two versions of each). One of the Grimlocks I had also had silver paint splotches on his red T-Rex heels and had a loose peg which made him unable to keep his robot feet connected to his forearms. As far as a difference with the SDCC version, this Grimlock lacks the red chrome and blue paint on his legs.

Image

Image


Snarl:

Snarl by far has the greatest difference with his SDCC self since all the gold chrome was replaced with standard silver chrome. There is no yellow found on this toy anywhere aside from he cover picture. Speaking of the box, the picture in the back depicts the translucent dino head having a silver streak across it but this is also absent from the final toy. The head is just clear plastic with red eyes.

Image

Image


Slug:

Slug also has no yellow or gold on him aside for his painted eyes. However, he does have the only tinted chrome on any of these dinobots, which is the blue on the dino's front legs, though the shade of blue will be different on any toy. I had one which had light blue on one leg and dark blue on the other. The tail joint is very tight and the plastic connecting the tail to the body is very weak. My first version crack while transforming and eventually fell off.

Image

So in general, while the deco is not as good as the SDCC Dinos (aside from Slog) and the quality is questionable on two, the heads are great (especially on Strafe) and the deco is still very nice with all the clear plastic and chromey goodness. We all had a lovely day together and I am overall very happy with this set. However, I did only pay 75$ US for it (plus taxes) and was lucky enough to get a replacement set.

PS: This is who is advertised on the back of the box:

Image



wj88

Those guys look Boss but, they are all so spikey. Are they made of hard or rubberized materials?

Re: Written Review of Generations Platinum Dinobots Set (classic heads): Deco and QC issues breakdow

PostPosted: Thu Nov 26, 2015 11:57 pm
by william-james88
fenrir72 wrote:
wj88

Those guys look Boss but, they are all so spikey. Are they made of hard or rubberized materials?


All the chromed bits are hard plastic (triceratop head, pteranodon wings, stegarausur back). The soft plastic is only on the same few parts that had soft plastic in the original AOE molds, like Slug's horns.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Fri Nov 27, 2015 1:31 am
by Rated X
You do know that you can make swoops tails straight with hot hot faucet water. Just hold em in the position you want them and let the hot water run on them for a few minutes.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Fri Nov 27, 2015 6:46 am
by Autobot N
william-james88 wrote:
Decepticon Sunstorm wrote:I do wish some G1-accurate Dinos were in my price range.


To be fair, a truly accurate G1 dino would have a copyright of Hasbro/Takara on them, just like the G1 toys had ;)

Well, I suppose there is Masterpiece Grimlock (which I had forgotten last night), which I do plan to get to start a Masterpiece collection, but it wouldn't fit in with any other Dinobots.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Fri Nov 27, 2015 7:58 am
by Gauntlet101010
I WISH these were just $100 in Canada. It was more like $200. Maybe my Toys R Us was just terrible with their prices.

Slog is only like the Amazon Slog in robot mode. Platinum Slog's arms aren't chrome. Also, the neck on SDCC's is slightly painted, this version is all clear with a fully painted head. There may be more, I don't have both in front of my right now. When you compare the two in-hand you can really tell the difference. I think your milage may vary with that large rubbery piece. My own was HEAVILY deformed because of the way it was jammed into the box. I've had it in Dino mode with a clear elastic around it to try and get it bent the right way for a while now and it's still not fully there. But it's close enough.

IMO, head aside, Swoop is better here than in the SDCC set. True he lacks some paint apps (including the back of the wings), but the red on this version really makes the shadows pop in comparison to SDCC's. Just add some Autobot stickers to complete the look and you're set.

Re: Written Review of Generations Platinum Dinobots Set (classic heads): Deco and QC issues breakdow

PostPosted: Fri Nov 27, 2015 7:59 am
by fenrir72
william-james88 wrote:
fenrir72 wrote:
wj88

Those guys look Boss but, they are all so spikey. Are they made of hard or rubberized materials?


All the chromed bits are hard plastic (triceratop head, pteranodon wings, stegarausur back). The soft plastic is only on the same few parts that had soft plastic in the original AOE molds, like Slug's horns.


Ouch! Thanks!

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Fri Nov 27, 2015 8:16 am
by william-james88
Rated X wrote:You do know that you can make swoops tails straight with hot hot faucet water. Just hold em in the position you want them and let the hot water run on them for a few minutes.


Yeah I did it last time: william-james-88-s-fixer-upper-thread-t102514s400.php#p1627645

I just found their apearance on the cover art a funny thing to mention, but I thank greatly you for helping me (and other who read this) in case any of us didnt know.


Gauntlet101010 wrote:I WISH these were just $100 in Canada. It was more like $200. Maybe my Toys R Us was just terrible with their prices.

Slog is only like the Amazon Slog in robot mode. Platinum Slog's arms aren't chrome. Also, the neck on SDCC's is slightly painted, this version is all clear with a fully painted head. There may be more, I don't have both in front of my right now. When you compare the two in-hand you can really tell the difference. I think your milage may vary with that large rubbery piece. My own was HEAVILY deformed because of the way it was jammed into the box. I've had it in Dino mode with a clear elastic around it to try and get it bent the right way for a while now and it's still not fully there. But it's close enough.

IMO, head aside, Swoop is better here than in the SDCC set. True he lacks some paint apps (including the back of the wings), but the red on this version really makes the shadows pop in comparison to SDCC's. Just add some Autobot stickers to complete the look and you're set.


Thanks for the info, I will go and correct it! Also, hey are only 100$ because of the current black friday sale week. They are usually 200$ but were 50% off from November 24 to December 3.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Sun Nov 29, 2015 8:43 pm
by D-Maximal_Primal
the movie designs don't look too bad with those heads and the paint looks decent, but I personally still think that these were meant for their movie heads and these just aren't as good (but the heads are amazing, just not with that body) :BOT:

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Tue Dec 01, 2015 4:21 pm
by william-james88
Well, if anyone wants to join me in the fun I am having, those dinos are now finally available in the states through BBTS:

http://www.bigbadtoystore.com/bbts/prod ... ode=retail

Image

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 03, 2015 11:19 pm
by william-james88
Anybody get their trypticons yet? I heard some horror stories online:

Image

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 03, 2015 11:30 pm
by -Kanrabat-
Lol Amazon! At least, all the times I dealt with them, that bullcrap never hapenned.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 03, 2015 11:33 pm
by fenrir72
william-james88 wrote:Anybody get their trypticons yet? I heard some horror stories online:

Image


WTFrak?!

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 03, 2015 11:38 pm
by D-Maximal_Primal
william-james88 wrote:Anybody get their trypticons yet? I heard some horror stories online:

Image

This might be considered abuse to animals :BOT:

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 03, 2015 11:50 pm
by william-james88
fenrir72 wrote:
WTFrak?!


It dethroned the previous winner of worse Amazon shipping of Platinum TFs ever:

Image

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Fri Dec 04, 2015 12:43 am
by triKlops
Damn and wow to both of those poor examples.
Real shame.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Fri Dec 04, 2015 8:22 am
by Agamemnon
william-james88 wrote:Anybody get their trypticons yet? I heard some horror stories online:

Image

I got mine. A little wear on the corners, but otherwise the outside box was in decent shape. It's not necessarily collector condition, but if I wanted a pristine outside box, I would have paid extra to get him from BBTS.

I've never owned Trypticon. I gotta say, for such a big guy with a simple transformation, he is a lot of fun to play with so far. I had him out last night with my son watching the football game. Good times!

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 31, 2015 10:29 am
by ScottyP
Got my Blaster/Perceptor set in yesterday. Will's news post from November is a great reference, and I won't go into gory detail on what he already has in regards to "how is this set different from previous releases." That'll just be summarized. That said, I've got some info to share to expand on the previously shared information.

So for Blaster, we've got:
  • Same darker/brown/tannish color with a slight metal flake/sparkle to the legs as found on SDCC 2010 release. Vintage and Takara TF Collection reissue have a color closer to silver or gray.
  • New copyright tampos, molded stamping same as SDCC 2010 release.

For Perceptor:
  • Completely neutered missile firing mechanism.
  • New slide accessories.
  • Pre-applied stickers that are identical to TRU Commemorative release. These differ from vintage and TF Collection reissues in that the silver backing is highly reflective, as opposed to the more matte silver of the vintage stickers.

Cassettes get weird, like cassettes do. The variations range from super minor (Ramhorn) to nonsense level ridiculous (Eject). How about a chart for these three, yes?
Image

Yes, that bottom-right-most cell is correct. This Platinum Edition Eject has a tampo, and you've seen it before, but never on Eject. It's Ratbat's. Platinum Eject:
Image

And here's SDCC 2009 Ratbat from the site galleries (though this is a sticker, you'll get the point):
Image
Transformers Universe - Classics 2.0 Ratbat (Reissue) Gallery

Lastly, a note on Platinum Steeljaw's weapons. They actually have the chrome stop to allow for a nice, smooth connection to the body of the tape. This is awesome! Here's one pictured next to a Platinum Ramhorn weapon:
Image
Which as you can see, this same feature disappointingly doesn't carry over to Ramhorn's weapons. I can't find myself lamenting Eject's guns being all chrome, since like most versions of the mold they don't stay in all that well anyhow.

So hope that helps any cassette collectors still on the fence with this one. There is one real, actual variant in here in Eject. Can't believe it took it being "in hand" for me to catch that!

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Dec 31, 2015 11:06 am
by william-james88
Thanks a bunch Scotty, both for the compliment and the extra info. I don't own Ratbat so I didnt know, what a totally odd but awesome variant here! What I find odd is how this blaster reissue is so close to the SDCC 2010 one. It really seems to have been the basis for this reissue and yet, they throw in Ratbat's detail as tampos?!

One thing I wanted to point out while I am in this thread (I had already told Scotty but I dont think I mentioned it here), it seems like thes platinums have the trend of keeping the old school embossed copyright marks, like writing Takara 1986 or such, and writing the updated copyright information (i.e. TOMY (since TOMY owns Takara)) as a stamp.

BUT the platinum coneheads no longer have their old embossed copyrights. Instead, while they still have a stamp, they have NEW indents where their old embossed copyrights used to be which writes TOMY instead of Takara (the accompnying japanese characters are also gone). So, and scotty please correct me if I am wrong, this would indicate that a lot more clean up was done on this mold giving Hasbro/TOMY an opportunity to even change the embossed copyright markings.

Re: Hasbro G1 Reissue releases for 2015 Generations/Platinum

PostPosted: Thu Feb 18, 2016 10:02 am
by o.supreme
Sorry for the necropost, but it is partially relevant.

OK...so the K-Mart near my home is closing. I don't know when, or how, but they have in stock at least 10 of the Insecticon Platinum sets. Starting at $79.99 (I saw the original postings, and how pretty much everyone rejected this set based on price point, understandably so). But now at 30% off because of the store closing, they are down to $56. Still pricey as many refer back to the set released at TRU that sold for @ $35. But the odd thing is...I look on eBay, and it seems these are selling for anywhere from $25-40. So...who in their right mind would even pay $56 for these? --Because the store is so close to my home (within walking distance) I'm going to check periodically. I would have liked to snatch them up to resell on eBay, but it looks like there is no shortage of them on the secondary market. They would literally have to get to 80% off (selling for $16.00) to be profitable. But I don't see that happening. If they ultimately don't sell by the time the store closes, they will probably get shipped to the only other store in my area, which is a good 20+ miles away.