Seibertron.com Energon Pub Forums

Posted: **Sat Apr 01, 2017 9:05 pm**

SureShot18 wrote:I do need a Rachet for the Lost Light shelf...I may just have to get RiD Rachet. And those stickers.

I am using my RiD Ratchet for my Lost Light shelf. He fits in perfectly

Posted: **Sat Apr 01, 2017 9:07 pm**

Let's be honest; this isn't just the best IDW Ratchet, but also the best CHUG Ratchet. This dude's pulling Triple duty here!

Posted: **Sat Apr 01, 2017 10:29 pm**

Kinda bummed out that they did not went with the skywarp deco for the jet mode to homage the proposed Skywarpatron for megatron. Feel like missed opportunity for something uniquely awesome. Then again i might get it for autobot megatron. :-D

: Skywarpatron.jpg (39.92 KiB) Viewed 31037 times

Posted: **Sat Apr 01, 2017 10:53 pm**

I need the ones for Prime & RiD Ratchet and RiD Thunderhoof. I think I am just gonna keep tabs on which ones I want and then go hog wild when my birthday comes around this summer.

Also how in the heck did they miss the top of Ratchet's head? He has a red stripe that both hasbro and Reprolables missed - its even on the packaging. (My personal pet peeve is when people miss either the headstripe on RiD/TFP Ratchet or the coloring on TFP/MTMTE Ratchet's beard plate. Not sure why it drives me crazy but it does.)

Posted: **Sun Apr 02, 2017 1:34 am**

Really liking the improved chest stickers for Megatron but I don't need much of the other ones. I've been actually covering up some of the excessive red on my figure and my factory stickers are still absoutely fine so I may pass on that set for now. And fffff-off to the autobot insignias. Stupid idw...

Posted: **Sun Apr 02, 2017 9:58 am**

DeathReviews wrote:I donno - the standard issue labels are already getting damaged under light handling. Putting more stickers on them could only lead to more shredding...

Reprolabels stickers usually stay on very well for years. Well mine has, sometimes even too well when I put one on crooked and try to move it. For some I have covered them with Future floor polish and they never come off after that.

Posted: **Sun Apr 02, 2017 3:12 pm**

Is your Rod not hot enough?
Have you been searching for a way to increase the heat of your Rod to impress your friends and family?
Well you can stop your fretting. There's a way to achieve a HOTTER ROD!

New from Reprolabels by ToyHax, it's the TH2234 Labels Set for TR Hot Rod!
In just a few simple steps you can increase the hotness of your Rod by 67%!

See what this satisfied customer had to say.

"Now that I tried Reprolabels TR Hot Rod set, my Rod is HOTTER THAN EVER! In fact My Rod is SO HOT,it could fry a chicken!

Works great for Alt modes too!

Front...

...and back!

Even the smallest of Rods will feel a significant increase in teh hottness!

FEEL THE HEAT!

From ToyHax.

Posted: **Sun Apr 30, 2017 5:15 pm**

If anyone has the sets for classics Windblade and TR Fortress, can anyone help with where I'm meant to put these stickers? I can't find them on the website instructions and I seem to have them left over.

Not the sword sheath ones, the red ones at the lower left.

And these ones for Fortress.

I know the prison bars and the knee caps, but what about the black ones?

Posted: **Mon May 01, 2017 8:24 pm**

Reprolabels are a MUST for my customs. Mainly for the

and

but I also use the spare ones from the sets I used for many of my customs.

Click on my sig below to see!

By the way, I have to apply the CW Devastator set. It will be a long endeavor.

Posted: **Sat May 13, 2017 5:11 am**

Before you worry about your Mom, you might want to have a look at this impressive update from Toyhax!

We have an enormous set of labels and parts to complete your Chaos on Velocitron box set, including new artwork from Dusty for Laser Optimus Prime's trailer and weapons for Fastlane!
http://toyhax.com/for-titans-ret/2299-p ... itron.html

Justin G. has created a true masterpiece of a set for MP SG Optimus Prime:
http://toyhax.com/for-masterpiece/2300- ... prime.html

We also have two vastly different sets for MP-36 Megatron, including a toy accurate take, and a massive alternate set to add cell shading to this great figure.
http://toyhax.com/for-masterpiece/2301- ... 1-toy.html
http://toyhax.com/for-masterpiece/2304- ... haded.html

The sets for Megatron are also available together at a discount:
http://toyhax.com/for-masterpiece/2305- ... -cell.html

While we're on the subject of MP toys, here's our set for MP Grapple!
http://toyhax.com/for-masterpiece/2313- ... apple.html

New TR sets, not the least of wich is Justin G.'s inspired Broadside labels:
http://toyhax.com/for-titans-ret/2314-l ... dside.html
http://toyhax.com/for-titans-ret/2309-l ... hadow.html

And a conversion set to turn TR Breakaway into Siren/Go Shooter:
http://toyhax.com/for-titans-ret/2312-l ... siren.html

Sets for the third party takes on Hoist (Artifex and Lorry):
http://toyhax.com/mp-scale/2306-labels- ... tifex.html
http://toyhax.com/mp-scale/2307-labels- ... lorry.html

Our first set for the new line of toys from Fans Hobby, is for Megatooth:
http://toyhax.com/mp-scale/2311-labels- ... tooth.html

We have subtle but effective new sets for Iron Factory's Soul Reaper, and KBB's MP10V:
http://toyhax.com/mini-scale/2308-label ... eaper.html
http://toyhax.com/standard-scale/2310-l ... mp10v.html

And finally, the last set in our ambitious line of labels for Playmates Voltron figures is for the Black Lion:
http://toyhax.com/mp-scale/2298-labels- ... -lion.html

Posted: **Sat May 13, 2017 5:15 am**

That Laser Prime part is calling to me~ I could totally just use it on the retail Voyager, too.

Valiant effort on Nautica, but... yeah, nothing can save that figure.

Holy heck though, that Breakaway to Siren set! :shock:

I suddenly feel a mighty need; why did we never think of this before?

Posted: **Sat May 13, 2017 5:16 am**

Aw, disappointed there's no TLK Prime stickers yet. :/

The toon shading set for MP Megatron looks neat. Not neat enough for me to want the figure though.

Posted: **Sat May 13, 2017 5:22 am**

Kurona wrote:That Laser Prime part is calling to me~ I could totally just use it on the retail Voyager, too.

Valiant effort on Nautica, but... yeah, nothing can save that figure.

Why? The figure looks fine to me. Out of the set only her and to a lesser extent Laser Prime look any good to me.

Also wasn't aware the shoulder kibble on that Prime mold could be tucked away.

Posted: **Sat May 13, 2017 5:31 am**

I still have the CW Computron and Devastator sets to apply.

But man, this feel like SO much work........

Posted: **Sat May 13, 2017 5:37 am**

Carnivius_Prime wrote:
Kurona wrote:That Laser Prime part is calling to me~ I could totally just use it on the retail Voyager, too.

Valiant effort on Nautica, but... yeah, nothing can save that figure.

Why? The figure looks fine to me. Out of the set only her and to a lesser extent Laser Prime look any good to me.

Also wasn't aware the shoulder kibble on that Prime mold could be tucked away.

Eh, as a toy she's okay - it IS the fantastic Blurr mold - but as a representation of the actual character she's crap.

And yeah, the shoulder kibble on Prime can be put down. It's one of the optional ways to differentiate him from other uses of the mold (ie Octone), along with folding away the wings and the side-of-the-head pylons.

Posted: **Sat May 13, 2017 5:53 am**

Kurona wrote:Eh, as a toy she's okay - it IS the fantastic Blurr mold - but as a representation of the actual character she's crap.

Ah right. I'm not an IDW fan so I just see a pretty retool of the Blurr mold that could stand next to Gen Arcee nicely. If only it weren't some costly boxset exclusive with figures I don't want.

And yeah, the shoulder kibble on Prime can be put down. It's one of the optional ways to differentiate him from other uses of the mold (ie Octone), along with folding away the wings and the side-of-the-head pylons.

Yeah I really wasn't aware. Just looking at toyhax stickers for the regular retail Prime at http://toyhax.com/for-titans-ret/2279-l ... prime.html and I like that a lot more than his 'official' configuration. Kinda wish I picked one up when I saw it for just £11 a lil while ago rather than it's usual £25. Then get those stickers (I admit the nod to movie Prime with the flames does appeal to me).

Posted: **Sat May 13, 2017 9:22 am**

Wow, that set for Shattered Glass Optimus is DARK. Me likey.

Posted: **Sat May 13, 2017 11:15 am**

I'm not a big fan of stickers, but those guns for Fastlane look nice.

Posted: **Sat May 13, 2017 12:21 pm**

Cobotron wrote:Is your Rod not hot enough?
Have you been searching for a way to increase the heat of your Rod to impress your friends and family?
Well you can stop your fretting. There's a way to achieve a HOTTER ROD!

I got my set back at start of the year and haven't applied them yet cos I got too lazy with my Hot Rod custom. I mostly bought it just for the higher contrast chest flame but I've always kinda liked the red/orange/yellow chevron things on the upper arms and legs too.

Posted: **Sat May 13, 2017 2:16 pm**

I was actually just thinking about putting Loudmouth on Breakaway (Although I do not have or want either).

Also, Nautica seems to have those kibble pieces on the undersides of her arms in the comics as well.

Posted: **Sat May 13, 2017 9:03 pm**

I like that they made better stickers for Laser Prime, but he ISN'T BURNING DOWN A FOREST

Posted: **Sun May 14, 2017 10:19 pm**

Black Bumblebee wrote:Wow, that set for Shattered Glass Optimus is DARK. Me likey.

I know, right?

I'm actually a bit let down by that sticker set though. Despite all the cool stuff they did... they missed the one major thing I really wanted and he needed: the massive shattered :SG-BOTS:

symbol on the sides of the truck mode. That was the one thing they needed to do, and they didn't do it, so I am a bit let down.

Posted: **Thu Jun 01, 2017 4:08 am**

We have a special surprise for you! Our new sticker set for TR Kickback just went online, and is priced at ONE CENT!
http://toyhax.com/for-legends/2315-labe ... kback.html

We've also completed a massive update of other TR sets, for Perceptor, Topspin, Quake, Kup and Krok:
http://toyhax.com/for-titans-ret/2316-l ... eptor.html
http://toyhax.com/for-titans-ret/2325-l ... -spin.html
http://toyhax.com/for-titans-ret/2320-l ... quake.html
http://toyhax.com/for-titans-ret/2319-l ... r-kup.html
http://toyhax.com/for-titans-ret/2318-l ... -krok.html

At long last, for those who opted on the UW version of Computron, we bring you this enormous (and very pretty) set:
http://toyhax.com/for-comb-wars/2323-la ... utron.html

On the 3rd party side, we have a set for FH Arch Enemy:
http://toyhax.com/mp-scale/2324-labels- ... enemy.html

A long overdue set for MMC Jaegertron:
http://toyhax.com/standard-scale/2322-l ... rtron.html

And finally, an absolutely brilliant set for GT J4ZZ:
http://toyhax.com/mp-scale/2317-labels-for-gt-j4zz.html

We're also continuing with our faction symbol promo, so you'll get a free mixed set for every $15 you spend!

Posted: **Thu Jun 01, 2017 6:18 am**

Still no TLK Prime flames.

Posted: **Thu Jun 01, 2017 8:31 am**

Give them chance. They needed to have the guy in hand to know the sizes to design. He's not been out that long. I'm gonna say the August update will have them.

Seibertron.com Energon Pub Forums

Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Toyhax.com May Update

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures

Toyhax.com June Update: Transformers Titans Return, Unite Warriors, More

Re: Reprolabels (Toyhax): Discussion and Pictures

Re: Reprolabels (Toyhax): Discussion and Pictures