Seibertron.com Energon Pub Forums

Posted: **Fri Mar 28, 2014 2:47 am**

WHEELJACK REPAINT...

Wheeljack can be released as...

Sunstreaker (with some basic mods). Robot mode will be nearly dead on.

Runamuck and Runabout. Robot modes will be nearly dead on.

Marlboro Diaclone colors.

That's 4 repaints.

Posted: **Fri Mar 28, 2014 6:30 am**

parc.elohssa wrote:WHEELJACK REPAINT...
Wheeljack can be released as...
Sunstreaker (with some basic mods). Robot mode will be nearly dead on.
Runamuck and Runabout. Robot modes will be nearly dead on.
Marlboro Diaclone colors.
That's 4 repaints.

no... no he cant...

wheeljack can pretty much only have: slicer, cartoon/anime, diaclone

given the current status of the MP line they wouldnt retool a a mold to make a completely different character. sw and ss were both lambos, but it doesnt mean there wont be a new lambo mold just for sunstreaker.

and runabout/runamuck only have the generations mold in common. they have nothing to do with G1 wheeljack.

Posted: **Fri Mar 28, 2014 8:00 am**

Sabrblade wrote:
fenrir72 wrote:Btw, concerning the other post

posting.php?mode=quote&f=4&p=1560675#pr1560654

where'd that come from?
That link goes to a "post a reply" page.

masterpiece-mp-20-wheeljack-from-takara-tomy-t97846s300.php#p1560654

My bad.

Posted: **Fri Mar 28, 2014 9:17 am**

First-Aid wrote:So let the speculation begin. Outside of Megatron and Grimlock every mold has been repainted or has significant chance of being repainted. Who will he be repainted as?

Hasui said in his interview in January that the amount of sales for the latest MP cars has allowed Takara to develop figures that don't need to be repainted or remolded. Unless I am interpreting that incorrectly, I don't think we will necessarily see a repaint. Maybe just additional runs of MP Wheeljack.

Posted: **Fri Mar 28, 2014 9:24 am**

Stormrider wrote:I don't think we will necessarily see a repaint. Maybe just additional runs of MP Wheeljack.

id be very surprised if they didnt. they may not have to, but if theyve proven to sell, and multiple versions, why wouldnt they? its all about making money. its like apple saying they made enough with the iphone 24 so theyre not going to make a iphone 24YTJ.

certain versions like slicer? probably not as its pretty hideous. but i think a cartoon/anime accurate is highly likely. after seeing MP G2 sideswipe, anythings possible.

Posted: **Fri Mar 28, 2014 10:09 am**

If you were Takara, and you had to sell more than one version of a mold to turn a profit, the question was, what characters could be made from MP Wheeljack?

I am well aware that Runamuck and Runabout have nothing to do with Wheeljack. The question was what repaints could you get from this figure. A simple retool would be easy with Wheeljack to get Runamuck and Runabout. Aesthetically, their robot modes are SPOT ON. Look at the G1 Robots of these characters. The feet, hands, chest, arms...all the same. To pass Wheeljack as Runamuck, Runabout or Sunstreaker, all Takara needs to do is give him a new head, weapons and a different paint job. Same with the robot mode for Sunstreaker. The vehicle modes don't match. But, I think fans would rather have SOMETHING rather than NOTHING for these characters.

You also said..."they wouldnt retool a a mold to make a completely different character..."

Sure they would.

MP Smokscreen....MP Prowl....MP Streak

MP Optimus Prime...MP Ultra Magnus...

MP Starscream...MP Acidstorm...MP Thundercracker...MP Sunstorm...MP Skywarp

Wheeljack is one of my 5 top favorite characters. Even still...I will support every and any variation of this toy. I want the MP line to continue. I know we will never get every character as an original mold.

shajaki wrote:
parc.elohssa wrote:WHEELJACK REPAINT...
Wheeljack can be released as...
Sunstreaker (with some basic mods). Robot mode will be nearly dead on.
Runamuck and Runabout. Robot modes will be nearly dead on.
Marlboro Diaclone colors.
That's 4 repaints.

no... no he cant...

wheeljack can pretty much only have: slicer, cartoon/anime, diaclone

given the current status of the MP line they wouldnt retool a a mold to make a completely different character. sw and ss were both lambos, but it doesnt mean there wont be a new lambo mold just for sunstreaker.

and runabout/runamuck only have the generations mold in common. they have nothing to do with G1 wheeljack.

Posted: **Fri Mar 28, 2014 10:12 am**

I read somewhere that Takara had no plans to do a repaint of Wheeljack. Because the other molds sold so well. That is awesome.

But I agree with shajaki. Even though Takara said they didn't have to do a repaint of MP Wheeljack...I would be very surprised if they DID NOT do a repaint anyway. :-)

That's just the way the Transformers game is played. :-)

shajaki wrote:
Stormrider wrote:I don't think we will necessarily see a repaint. Maybe just additional runs of MP Wheeljack.

id be very surprised if they didnt. they may not have to, but if theyve proven to sell, and multiple versions, why wouldnt they? its all about making money. its like apple saying they made enough with the iphone 24 so theyre not going to make a iphone 24YTJ.

certain versions like slicer? probably not as its pretty hideous. but i think a cartoon/anime accurate is highly likely. after seeing MP G2 sideswipe, anythings possible.

Posted: **Fri Mar 28, 2014 11:16 am**

I'd probably consider getting Slicer. I really like that colourscheme. The MP line could definitely use more Decepticons too. (heck, a Prime inspired Dead End repaint with a new ugly head would be cool too, I love TFP Dead End and his gloriously hideous paint job)

I'm not bothered if they don't do that though, and happily surprised that the sales mean they don't feel the need to repaint and retool to make it worthwhile. In some cases it's justified, demanded even. If they'd made Prowl, but not Bluestreak or Smokescreen, people would have been asking about them. The retooling that each got was more than would have satisfied people, so it's actually pretty great that they went those extra yards to make those bots stand out. Likewise G2 Sideswipe and his add-ons. Long may this level of detail last in the MP line.

Posted: **Fri Mar 28, 2014 12:55 pm**

parc.elohssa wrote:You also said..."they wouldnt retool a a mold to make a completely different character..."
Sure they would.
MP Smokscreen....MP Prowl....MP Streak
MP Optimus Prime...MP Ultra Magnus...
MP Starscream...MP Acidstorm...MP Thundercracker...MP Sunstorm...MP Skywarp
Wheeljack is one of my 5 top favorite characters. Even still...I will support every and any variation of this toy. I want the MP line to continue. I know we will never get every character as an original mold.

i think youre missing my point. these arent prime or generations we're talking about. those lines, its ok to squeeze whatever you can out of every mold, even if it only marginally fits or not at all. but they havent done that with any MP figure yet.

the only MP repaint/retools weve gotten so far (the ones you listed) are ones that completely made sense, because their original counterparts had the same repaint/retools.

runamuck and runabout only share a similar transformation with wheeljack but are different cars and different looking robots. trying to get r&r out of that mold just seems like to hard of a squeeze.

and sunstreaker would need to have every car piece replaced to make the lambo. and with that excessive retooling, its would probably just make more sense to make him his own mold.

and given the current trend, im safely assuming we will get the entire season one (and probably two) cast, with original molds where its needed.

Posted: **Tue Apr 01, 2014 4:59 pm**

If posted already my apologies but here are pics of the actual Lancia Stratos 539. Brrrrrrrrr gives shivers on my legs. The Ark really knew what alternative modes to choose.

Possible Malboor WJ(hopefully)

Posted: **Tue Apr 01, 2014 5:16 pm**

Always had a soft spot for the Lancia Stratos

Posted: **Tue Apr 01, 2014 7:59 pm**

MightyMagnus78 wrote:Always had a soft spot for the Lancia Stratos

Me too. One of my favorite Autobot car alt modes.

Posted: **Wed May 21, 2014 4:41 am**

New photos of MP-20 Wheeljack:

From: https://www.facebook.com/pages/TF-Upgrader

I can't wait anymore!

Posted: **Wed May 21, 2014 6:33 am**

Cyberpath wrote:New photos of MP-20 Wheeljack:

From: https://www.facebook.com/pages/TF-Upgrader

I can't wait anymore!

http://www.seibertron.com/transformers/news/hires-scans-from-generations-2014-volume-1-mp-wheeljack-bumblebee-ultra-magnus-star-saber/30262/

Posted: **Sat May 24, 2014 10:35 am**

Where's the best/cheapest place to preorder Wheeljack?

Posted: **Sat May 24, 2014 11:15 am**

Hero wrote:Where's the best/cheapest place to preorder Wheeljack?

Well, regarding best/cheapest place, unfortunately you're kind of late, he's already sold out on Ami Ami, HLJ, and Anime-Export. ($44-51) The MP figures sell like hotcakes.

Still available for pre-order on Robotkingdom for $60, but I have no experience with them.

And then there are the American sites: $70 on Captured Prey. $80 on BBTS & TFsource.

These are the ones I know of.

Posted: **Sat May 24, 2014 5:39 pm**

Anyone know why they're so pricey on TFS and BBTS?

Posted: **Sat May 24, 2014 6:27 pm**

Drift082111 wrote:Anyone know why they're so pricey on TFS and BBTS?

Because those are sites based in the United States, so their higher prices account for importing.

Whereas sites like Ami Ami, Anime-Export, and HLJ are based in Japan, so their prices are closer to the domestic Japanese prices.

RobotKingdom, however, is based in Hong Kong.

Posted: **Sun May 25, 2014 11:48 am**

Sabrblade wrote:
Drift082111 wrote:Anyone know why they're so pricey on TFS and BBTS?
Because those are sites based on the United States, so their higher prices account for importing.

Whereas sites like Ami Ami, Anime-Export, and HLJ are based in Japan, so their prices are closer to the domestic Japanese prices.

RobotKingdom, however, is based in Hong Kong.

and sometimes but not always, it tends to even out anyways with the shipping cost.

what sucks though, is buying imported items, in the states, shipped to canada. their prices are hiked due to the importing, and shipping is almost double what americans pay to ship domestically. so ive been triny to limit my online shopping for imported items in american based stores.

Posted: **Mon May 26, 2014 4:53 am**

Finally another MP update from Hasui:

MP-20 ホイルジャックの彩色版テストショットが来たので、MP-17 プロールと一緒に撮影してみました。ホイルジャックの彩色は、まだ調整が必要ですが製品に近しい状態の物を他のMPと一緒に並べられるのは嬉しい限りです。

I think he said that Wheeljack's colours still require adjustments.

Looks great though!

Posted: **Mon May 26, 2014 5:14 am**

He looks like a freakin awesome 3rd Party large Deluxe! Want!

Cyberpath wrote:Finally another MP update from Hasui:

MP-20 ホイルジャックの彩色版テストショットが来たので、MP-17 プロールと一緒に撮影してみました。ホイルジャックの彩色は、まだ調整が必要ですが製品に近しい状態の物を他のMPと一緒に並べられるのは嬉しい限りです。

I think he said that Wheeljack's colours still require adjustments.

Looks great though!

Posted: **Mon May 26, 2014 6:38 am**

Takara Tomy Transformers Masterpiece designer Shogo Hasui has tweeted a new image of the upcoming MP-20 Wheeljack figure, next to MP-17 Prowl, showing the scale of the two and a look at the not-yet-finalised colours. Thanks to Seibertron.com user Cyberpath for the tip, and check out the image below!

Posted: **Mon May 26, 2014 7:19 am**

Looking great. I like the rear view mirrors, nice touch. If only his ears lit up!

Posted: **Mon May 26, 2014 9:02 am**

I never owned a g1 Wheeljack before, so I am happy that I finally will get one!
I think they are doing him justice the way he looks. Minor nitpick: I wish the upperlegs and lowerarms were gray instead of black, like in the cartoons, but this is nice as well.

Posted: **Mon May 26, 2014 10:02 am**

Nice! If these are the final colors, I'm glad the windshield isn't as dark as originally shown. Looks excellent, can't wait for this guy!

Seibertron.com Energon Pub Forums

Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Official Takara Tomy Transformers Masterpiece MP-20 Wheeljack Discussion

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Colours Test Shot - Takara Tomy Transformers Masterpiece MP-20 Wheeljack

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy

Re: Masterpiece MP-20 Wheeljack from Takara Tomy