Seibertron.com Energon Pub Forums

Sentinel_Primal wrote:

RodimusPrimeUkraine1 wrote:

Sentinel_Primal wrote:That's awesome! Already decided that regardless of the name they give him, he's gonna be my collection's Sentinel Prime

What are we talking about?

DK-3 aka Blue Trailbreaker

Thank you I was so confused. I probably missed this reveal!

RodimusPrimeUkraine1 wrote:

Sentinel_Primal wrote:

RodimusPrimeUkraine1 wrote:

Sentinel_Primal wrote:That's awesome! Already decided that regardless of the name they give him, he's gonna be my collection's Sentinel Prime

What are we talking about?

DK-3 aka Blue Trailbreaker

Thank you I was so confused. I probably missed this reveal!

It's in the link that was posted before my comment. Technically falls more into leak than reveal though

Sentinel_Primal wrote:That's awesome! Already decided that regardless of the name they give him, he's gonna be my collection's Sentinel Prime

That's quite clever actually

ZeroWolf wrote:

Sentinel_Primal wrote:That's awesome! Already decided that regardless of the name they give him, he's gonna be my collection's Sentinel Prime

That's quite clever actually

He hits two outta three major points for Animated Sentinel, truck mode and a shield, he's just missing the Chin

Thanks to a heads up from Nemesis Primal, we have news that the next Transformers Generations Selects figure may have just been revealed to us. This news comes courtesy of Entertainment Earth, who is preparing for San Diego Comic Con and is teasing many of the exclusives for the convention. Among them is the transformers exclusive, who, while in a small and grainy look, appears to be the rumored blue Trailbreaker repaint AKA DK3, another member of the Diaclone repaint club. While we don't get a good look, it is enough of a tease to get our appetites up, and we imagine a full reveal will be happening very soon.

This figure will likely begin as a SDCC exclusive before ending up on other fan channels, as other SDCC Selects figure have in the past.

Check out the images below, and let us know what you think in the comments section below!

Dark Knight 3 or Donkey Kong 3: You decide!

Oh sweet, another figure that doubles as a Diaclone Homage AND Shattered Glass character!

https://tfwiki.net/wiki/Trailbreaker_(SG)

Hey, Flatline.

I have some saved up for a selects Cyclonus, but I've never used Hasbro Pulse. Do they have shipping for U.S.? I can't seem to find him on any website other than the not sure are trustworthy ones, and TF sites like TF Source. Where do you think I should get my Cyclonus? I don't even want to pay $3 of shipping because I'm a spoiled child.

RodimusPrimeUkraine1 wrote:I have some saved up for a selects Cyclonus, but I've never used Hasbro Pulse. Do they have shipping for U.S.? I can't seem to find him on any website other than the not sure are trustworthy ones, and TF sites like TF Source. Where do you think I should get my Cyclonus? I don't even want to pay $3 of shipping because I'm a spoiled child.

If I remember correctly, if you want free shipping on Pulse as an American citizen you'll have to pay for a yearly membership. If not, you pay for shipping.

If you're Canadian, order a paperclip or a titan and it's 30$US for shipping either way.

Anyway, if you really want a thing, you'll pay for it with all the fees. If not, skip the thing and use your money for something else. It's that simple.

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:I have some saved up for a selects Cyclonus, but I've never used Hasbro Pulse. Do they have shipping for U.S.? I can't seem to find him on any website other than the not sure are trustworthy ones, and TF sites like TF Source. Where do you think I should get my Cyclonus? I don't even want to pay $3 of shipping because I'm a spoiled child.

If I remember correctly, if you want free shipping on Pulse as an American citizen you'll have to pay for a yearly membership. If not, you pay for shipping.

If you're Canadian, order a paperclip or a titan and it's 30$US for shipping either way.

Anyway, if you really want a thing, you'll pay for it with all the fees. If not, skip the thing and use your money for something else. It's that simple.

I though of that. If I skip, I'm picking up a Sweep to satisfy my figure lust and fill the Scourge spot.
The real question is: Is there another site or store I can get a Selects Cyclonus for without charging shipping?

RodimusPrimeUkraine1 wrote:

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:I have some saved up for a selects Cyclonus, but I've never used Hasbro Pulse. Do they have shipping for U.S.? I can't seem to find him on any website other than the not sure are trustworthy ones, and TF sites like TF Source. Where do you think I should get my Cyclonus? I don't even want to pay $3 of shipping because I'm a spoiled child.

If I remember correctly, if you want free shipping on Pulse as an American citizen you'll have to pay for a yearly membership. If not, you pay for shipping.

If you're Canadian, order a paperclip or a titan and it's 30$US for shipping either way.

Anyway, if you really want a thing, you'll pay for it with all the fees. If not, skip the thing and use your money for something else. It's that simple.

I though of that. If I skip, I'm picking up a Sweep to satisfy my figure lust and fill the Scourge spot.
The real question is: Is there another site or store I can get a Selects Cyclonus for without charging shipping?

Not without Prime or paying for Premium membership with Hasbro Pulse. Even TF Source has flat rate shipping now, if I recall. That or you have to spend 100 bucks.

sol magnus wrote:

RodimusPrimeUkraine1 wrote:

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:I have some saved up for a selects Cyclonus, but I've never used Hasbro Pulse. Do they have shipping for U.S.? I can't seem to find him on any website other than the not sure are trustworthy ones, and TF sites like TF Source. Where do you think I should get my Cyclonus? I don't even want to pay $3 of shipping because I'm a spoiled child.

If I remember correctly, if you want free shipping on Pulse as an American citizen you'll have to pay for a yearly membership. If not, you pay for shipping.

If you're Canadian, order a paperclip or a titan and it's 30$US for shipping either way.

Anyway, if you really want a thing, you'll pay for it with all the fees. If not, skip the thing and use your money for something else. It's that simple.

I though of that. If I skip, I'm picking up a Sweep to satisfy my figure lust and fill the Scourge spot.
The real question is: Is there another site or store I can get a Selects Cyclonus for without charging shipping?

Not without Prime or paying for Premium membership with Hasbro Pulse. Even TF Source has flat rate shipping now, if I recall. That or you have to spend 100 bucks.

Than I'll have to get the old chug one. It's fine, I just wish it had two hands....Can I fix that somehow?

RodimusPrimeUkraine1 wrote:

sol magnus wrote:

RodimusPrimeUkraine1 wrote:

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:I have some saved up for a selects Cyclonus, but I've never used Hasbro Pulse. Do they have shipping for U.S.? I can't seem to find him on any website other than the not sure are trustworthy ones, and TF sites like TF Source. Where do you think I should get my Cyclonus? I don't even want to pay $3 of shipping because I'm a spoiled child.

If I remember correctly, if you want free shipping on Pulse as an American citizen you'll have to pay for a yearly membership. If not, you pay for shipping.

If you're Canadian, order a paperclip or a titan and it's 30$US for shipping either way.

Anyway, if you really want a thing, you'll pay for it with all the fees. If not, skip the thing and use your money for something else. It's that simple.

I though of that. If I skip, I'm picking up a Sweep to satisfy my figure lust and fill the Scourge spot.
The real question is: Is there another site or store I can get a Selects Cyclonus for without charging shipping?

Not without Prime or paying for Premium membership with Hasbro Pulse. Even TF Source has flat rate shipping now, if I recall. That or you have to spend 100 bucks.

Than I'll have to get the old chug one. It's fine, I just wish it had two hands....Can I fix that somehow?

Universe mold Cyclonus vs Combiner wars Cyclonus: Which is better?

RodimusPrimeUkraine1 wrote:Universe mold Cyclonus vs Combiner wars Cyclonus: Which is better?

Better for what?

Because comparing a standard deluxe figure against a big voyager that is also a combiner torso is like comparing apples and tennis balls.

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:Universe mold Cyclonus vs Combiner wars Cyclonus: Which is better?

Better for what?

Because comparing a standard deluxe figure against a big voyager that is also a combiner torso is like comparing apples and tennis balls.

Good point. As a Cyclonus in general.

RodimusPrimeUkraine1 wrote:

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:Universe mold Cyclonus vs Combiner wars Cyclonus: Which is better?

Better for what?

Because comparing a standard deluxe figure against a big voyager that is also a combiner torso is like comparing apples and tennis balls.

Good point. As a Cyclonus in general.

I'd say Universe, but he's tiny compared to now on the strength of him only ever having to be Cyclonus and not merge into Grand Guignol or WTF.

sol magnus wrote:and not merge into Grand Guignol or WTF.

CW would be Galvatronus, UW would be Grand Galvatron.

sol magnus wrote:

RodimusPrimeUkraine1 wrote:

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:Universe mold Cyclonus vs Combiner wars Cyclonus: Which is better?

Better for what?

Because comparing a standard deluxe figure against a big voyager that is also a combiner torso is like comparing apples and tennis balls.

Good point. As a Cyclonus in general.

I'd say Universe, but he's tiny compared to now on the strength of him only ever having to be Cyclonus and not merge into Grand Guignol or WTF.

Is there a way to give him a second hand? Cause that's almost a dealbreaker for me.

RodimusPrimeUkraine1 wrote:Is there a way to give him a second hand? Cause that's almost a dealbreaker for me.

You mean on the deluxe, making for the left hand to be able to hold something, right?



Simple. DRILL THE HOLE. Start with a very small hole in the center of the hand. Go in a second time with a slightly bigger drill. Then finish with the 11/64 drill.

If you want your "perfect" Transformers, you do the work.

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:Is there a way to give him a second hand? Cause that's almost a dealbreaker for me.

You mean on the deluxe, making for the left hand to be able to hold something, right?



Simple. DRILL THE HOLE. Start with a very small hole in the center of the hand. Go in a second time with a slightly bigger drill. Then finish with the 11/64 drill.

If you want your "perfect" Transformers, you do the work.

Is just drilling a hole insane enough to work and not make it worse? If it is I have no issues!

RodimusPrimeUkraine1 wrote:Is just drilling a hole insane enough to work and not make it worse? If it is I have no issues!

Practice first on some scrap transformers and use a standard weapon with a 5mm peg as a gauge.
Look up my customs to see the result of that technique I'm using so often.

-Kanrabat- wrote:

RodimusPrimeUkraine1 wrote:Is just drilling a hole insane enough to work and not make it worse? If it is I have no issues!

Practice first on some scrap transformers and use a standard weapon with a 5mm peg as a gauge.
Look up my customs to see the result of that technique I'm using so often.

Thank you.

o.supreme wrote:

sol magnus wrote:and not merge into Grand Guignol or WTF.

CW would be Galvatronus, UW would be Grand Galvatron.

Yeah, I know I just didn't want to type out to different names.

Clearer image of DK-3. Really liking how his colors look