Page 18 of 23

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sat Jul 13, 2019 1:41 pm
by SGMLordMirage
Just received the add on parts for Prowl and Laserbeak. I have not applied any stickers yet, just wanted to show off a couple of pictures first.

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Mon Jul 15, 2019 8:23 pm
by SGMLordMirage
UPDATE!

So I applied most of the stickers to Prowl. Have to say not bad! For Laserbeak, not too bad, may add some paint to his blasters to highlight them. I need to take a better photo of Laserbeak, i will add that tomorrow. Overall not bad! In addition, I added the stickers to Ravage but he is in cassette mode inside Soundwave.

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Mon Jul 15, 2019 10:16 pm
by ZeldaTheSwordsman
Ooh, nice Transformers Jr. Soundwave and Prowl :P

ToyHax Newsletter - July 2019

PostPosted: Fri Jul 19, 2019 10:38 am
by ZeroWolf
Presenting Toyhax's July 2019 release!

We'll begin with this month's heavy hitter, our set for Siege Jetfire! Our blend of greeble, G1 and Macross styled details does this figure wonders:
https://toyhax.com/for-siege/2791-label ... tfire.html

Image

Did you like our upgrades for Siege Starsceram? Thundercracker and Red Wing now sport the same kind of additions:
https://toyhax.com/for-siege/2793-label ... acker.html
https://toyhax.com/for-siege/2794-label ... -wing.html

Siege Red Alert looks like a good old fashioned futuristic Lambo fire chief car:
https://toyhax.com/for-siege/2790-label ... alert.html

Siege Galaxy Optimus Prime new labels look like they should have been there all along:
https://toyhax.com/for-siege/2792-label ... prime.html

With a lack of reference material, some of the female Autobots have been difficult to work on. We think we pulled it off well with Greenlight:
https://toyhax.com/for-siege/2804-label ... trike.html

G2 Swoop inspired labels for Pteraxadon, and some much needed color breaks for Aimless:
https://toyhax.com/for-siege/2802-label ... xadon.html

Big Powered gets some big love:
https://toyhax.com/for-classics/2795-ta ... wered.html

FT Quietus looked a little sparse, so we came up with this:
https://toyhax.com/mp-scale/2805-labels ... ietus.html

Throughout all of this, we're continuing work on our cel-shaded line! CW Devastator is by far our favorite of the new editions:
https://toyhax.com/for-comb-wars/2803-l ... r-csw.html

Plus, we've now covered UT Runman/Bluzzing, XTB Ollie, XTB Boost, BC Grump and Ace Tumbler.
https://toyhax.com/mp-scale/2801-labels ... n-csw.html
https://toyhax.com/mp-scale/2799-labels ... e-csw.html
https://toyhax.com/mp-scale/2797-labels ... ype-a.html
https://toyhax.com/mp-scale/2798-labels ... ype-b.html
https://toyhax.com/mp-scale/2800-labels ... p-csw.html
https://toyhax.com/mp-scale/2796-labels ... r-csw.html

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Fri Jul 19, 2019 1:33 pm
by ZeldaTheSwordsman
Re: the Galaxy Upgrade set, G1ish Cel-shaded windows instead of white overlays for the windshield frames (and the frames of the faux windshields on the solder armor) = fail (and honestly, those feel esp. out of place on that mold). The Skyfire, Red Alert, and Greenlight sets look great, the you-know-what on the first two notwithstanding. The Aimless and Pteraxodon set is cool, adds some delightful touches.

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Fri Jul 19, 2019 2:23 pm
by Nathaniel Prime
Ironically, Red Wing is not only the best version of the Seeker mold in my opinion, but also wears the tetra fin thing better too (not that I needed one for my seekers, I prefer the battleship Galactica look).

I'm kinda iffy on Cell shades windows. I like them, but I also like regular windows so...

But Galaxy Upgrade Prime doesn't suit them at all. It would be like putting them on a Bayformer.

The rest of the sets are pretty sweet, especially Jetfire. ;)^

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Fri Jul 19, 2019 2:52 pm
by blackeyedprime
Cell shaded devestator may be worth giving a go, haven't combined mine yet (I've not decided how or where they are being displayed yet) but the stickers may set it out from my NBK.

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Fri Jul 19, 2019 2:55 pm
by The_Cryptid_Person
When Toyhax had a 40% off sale earlier, I grabbed the Fort Max and Trypticon sets, among others. I'll post pics when they've arrived and I've applied them. Seems the discount decreased after this update, but that makes sense - they've added some neat new things

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Fri Jul 19, 2019 6:52 pm
by ZeldaTheSwordsman
Nathaniel Prime wrote:I'm kinda iffy on Cell shades windows. I like them, but I also like regular windows so...

But Galaxy Upgrade Prime doesn't suit them at all. It would be like putting them on a Bayformer.
Exactly. Personally, I think that instead of the hideously out-of-place cel-sjaded windows they should have done stickers to color the cab and faux-cab window frames, and a behind-the-"glass" sticker for the chest windows that showed Cybertron Optimus' matrix compartment. They really phoned that set in.

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sat Jul 20, 2019 11:00 am
by Nathaniel Prime
ZeldaTheSwordsman wrote:
Nathaniel Prime wrote:I'm kinda iffy on Cell shades windows. I like them, but I also like regular windows so...

But Galaxy Upgrade Prime doesn't suit them at all. It would be like putting them on a Bayformer.
Exactly. Personally, I think that instead of the hideously out-of-place cel-sjaded windows they should have done stickers to color the cab and faux-cab window frames, and a behind-the-"glass" sticker for the chest windows that showed Cybertron Optimus' matrix compartment. They really phoned that set in.


Or just make a set that makes his arms blue. So many opportunities...

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sun Jul 28, 2019 8:52 pm
by The_Cryptid_Person
My big order arrived today! Started with Fort Max and *man* do those things need instructions. I think I did alright with the pictures on the webpage, but the numbering on later sets (pyro had it I think?) was sorely missed. Spent more time comparing window quantities and sizes than actually applying the darn things.
Didn't help that with the SDCC version half the sticker spaces were already covered by Hasbro's relatively unimpressive offerings... which I mostly left in peace since they were "premium exclusive" details

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Wed Jul 31, 2019 7:59 pm
by SGMLordMirage
Sweet, attach some pics if you get a chance. That’s one set I have been wanting to purchase!

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sun Aug 04, 2019 2:50 am
by The_Cryptid_Person
Anyone have thoughts on the Metroplex set? I'm thinking about purchasing it, but I'm unsure how many of the details are actually new versus how many just cover the Hasbro stickers

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Tue Aug 06, 2019 4:44 pm
by SGMLordMirage
Probably a late response @Latebrus-K to your post. I personally have not bought that set, kind of settled for the stickers he came with from Hasbro. Thought they are not bad, i guess it depends on what you prefer.

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Mon Aug 12, 2019 6:18 pm
by SGMLordMirage
Having read some thoughts about the set for the Galaxy Upgrade OP, i decided to buy them along with the set for Ironhide. I am good with both, to me they had alittle touch to them. I have the set for Cog but haven’t applied them yet, with the Jetfire set coming soon. Can’t wait for that one!
Thanks for looking,

UPDATE

Just finished Cog!

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Mon Aug 19, 2019 7:21 pm
by SGMLordMirage
Here he is with all stickers applied. Have to say this really enhances Jetfire, adding detail and color over all that white. I was planning on getting this set regardless but was able to snag it for 40% off. For my personal taste it looks awesome.

Thanks for looking,

SGM

Toyhax August 2019 Update - Tetrajets, Springer, Brunt, and More

PostPosted: Fri Aug 23, 2019 8:15 pm
by D-Maximal_Primal
We're ending summer with a well rounded release that hits all the bases!

Our first upgrade kit, featuring 3 tail fin accessories, makes proper tetrajets out of the Siege Rainmakers:
https://toyhax.com/for-siege/2807-parts ... akers.html

Siege Springer gets a brilliant set, to match the fantastic that he is:
https://toyhax.com/for-siege/2806-label ... inger.html

We've also got some pretty inspired sets for both Siege Brunt and Lancer:
https://toyhax.com/for-siege/2810-label ... ancer.html
https://toyhax.com/for-siege/2811-label ... brunt.html

TR Trypticon gets his very own Chief of Engineering with this conversion set for Siege Brunt, into Deadlift:
https://toyhax.com/for-siege/2812-label ... dlift.html

Adding to our line of Cel-Shaded windows, we've finally covered MP Bumblebee:
https://toyhax.com/for-masterpiece/2815 ... e-csw.html

Toyhax has made a comeback with MMPR! Check out our sets for Zeo Megazord and Super Zeo Magazord:
https://toyhax.com/labels-for-mmpr/2808 ... azord.html
https://toyhax.com/labels-for-mmpr/2809 ... azord.html

There have been lots of requests for labels for ZT Kronos, we've happily obliged with this beast of a set:
https://toyhax.com/mp-scale/2816-labels ... ronos.html

Lastly, PE Black Jinrai gets some long awaited additions:
https://toyhax.com/standard-scale/2814- ... inrai.html

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sat Aug 24, 2019 12:48 am
by Ultra Markus
still no skywarp?

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Tue Sep 10, 2019 12:24 pm
by SGMLordMirage
I decided to buy the stickers for Shockwave and Springer. My opinion, it makes them look a lot better, breaking up the solid colors and adding some detail.

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Tue Sep 10, 2019 7:28 pm
by ZeldaTheSwordsman
I agree with you about Shockwave, those actually look quite nice.
But I think the only sticker on Springer's sheet even quasi worth a damn is the chest one, although even that is tainted by being yellow. The greebling stickers are just as horrendously clashing and hideous and gratuitous on the SIEGE toy as they were on the original, maybe even a little moreso (Blurr and Hot Rod have the same problem). And the less said about the window stickers, the better.

Also, kill the Galaxy Upgrade Optimus sheet with fire.

On a more positive note, I like the Super Zeo Megazord sheet. It would be perfect if they made a replacement crown to go with it, but it's still a delight to have that available.

Toyhax September 2019 Update - G2 Sideswipe, Skywarp, Slamdance, and More

PostPosted: Fri Sep 27, 2019 5:43 pm
by D-Maximal_Primal
We're very excited to bring you our next ONE CENT promo set! It's the first set for the new Siege Omega, and focuses on upgrades and base details for Countdown. Act quickly, the promo price ends this weekend!
https://toyhax.com/for-siege/2830-label ... -base.html

This release sees sets for both the cartoon and toy accurate Refractor, featuring simulated leather, realistic camera details, vibrant chest labels and more:
https://toyhax.com/for-siege/2821-label ... or-g1.html
https://toyhax.com/for-siege/2822-label ... aktor.html

Finally, you can complete your collection of Siege Seekers with our tailfin and labels for Skywarp:
https://toyhax.com/for-siege/2825-parts ... ywarp.html

We've got some sets for Covert Clone Sideswipe covering his radical G2 Deco and beyond:
https://toyhax.com/for-siege/2823-label ... eyond.html
https://toyhax.com/for-siege/2824-label ... pe-g2.html

Siege Slamdance gets a throwback set with loads of 80s cassette details:
https://toyhax.com/for-siege/2827-label ... dance.html

As always, we take our sets for Micromasters seriously. Take a look at the Sports Car Patrol:
https://toyhax.com/for-siege/2826-label ... atrol.html

MP Sunstreaker can now join his brother in cel-shaded glory:
https://toyhax.com/for-masterpiece/2831 ... ndows.html

Due to popular demand, we've upscaled our set for Warbotron to fit the Jinbao oversized version:
https://toyhax.com/mp-scale/2829-labels ... -wb01.html

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Fri Sep 27, 2019 9:22 pm
by Hydrargyrus
Anyone reading this should take a look at the first link for Sideswipe. There’s a reason they said “and beyond.”

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sat Sep 28, 2019 6:22 am
by DMSL
I like Reprolabels/Toyhax, but i wish they would make more toy stages and offered those trimmed stages again. These 12" tall are great for Billy bookcases in width and depth but they are a little too tall. They really need to offer the trimmed versions again that are 11" for a much better fit.

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Thu Oct 17, 2019 1:09 pm
by SGMLordMirage
Decided to purchase the set for “Refraktor”. Doesn’t look too bad, making it look more like a camera, more so for the lens parts. Anyways still not a bad set to get, if that is your preference.

SGM

Re: Reprolabels (Toyhax): Discussion and Pictures

PostPosted: Sat Oct 26, 2019 2:59 am
by Rainmaker
The Stickerfixer isn't available for purchase, are there any alternatives?

:MAXIMAL: