Page 296 of 629

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 9:45 am
by MadProject
found on Facebook, but the post indicate the TransformersOfficial Instagram as source.

Yellow Rampage confirmed
studio series devastator.jpg

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 9:47 am
by Sabrblade
MadProject wrote:found on Facebook, but the post indicate the TransformersOfficial Instagram as source.

Yellow Rampage confirmed
studio series devastator.jpg
Skipjack, you mean.

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 9:47 am
by Sentinel_Primal
Honestly, I'm fine with the red leg. Mostly because as much as the Rampage mold surprised me, it's still not good enough in my opinion to warrant owning two of it, especially for the purpose of a leg

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 9:57 am
by Hellscream9999
Skipjack looks amazing as a leg, which is great, cuz I love the figure, and can't wait to get rampage on display with skipjack as a leg for devs

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 11:27 am
by D-Maximal_Primal
I can't wait to start posing Devastator around, by the looks of it he has a waist swivel, and I want to see if we can get him into a quadrupedal stance.

Gosh he is the best thing I have seen this year. By far my most anticipated figure of the year

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 11:50 am
by SGMLordMirage
While this is nothing new, the big part is while I am finishing up my time in Virginia, my wife back in Missouri just picked up Studio Series 56 Shockwave at a Target for me. Gotta love having a wife who keeps a look out. Unfortunately they didn’t have Scavenger.


This will definitely be a good thing to look forward to when I return in March.

SGM

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 12:03 pm
by MadProject
Sentinel_Primal wrote:Honestly, I'm fine with the red leg. Mostly because as much as the Rampage mold surprised me, it's still not good enough in my opinion to warrant owning two of it, especially for the purpose of a leg


I am kinda lucky.
Since I still have to get the ones already released (I live in Italy and I have to get all my toys mostly from outer sites) I'll probably skip the red one and wait for this one.

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 2:46 pm
by Brutal brawl
I the second picture of overload in his robot mode theres a face in his hand. :michaelbay:

First Look At Transformers Studio Series Voyager Class Skipjack As Leg For Devastator

PostPosted: Sun Feb 09, 2020 3:36 pm
by ZeroWolf
Greetings Seibertronians! Hot from the reveal of Studio Series Devesator this weekend at Wonder Festival 2020 [Winter], fellow Seibertron user, MadProject, has pointed our optics over to the Transformers Official Instagram account who have sent out their own picture of Devy, with one major difference. In this picture, Devastator has a yellow leg. This is our first look at Skipjack, the new name for the yellow rampage, seen in the Revenge of the Fallen movie.

Image

Skipjack is a redeco of Voyager Class Rampage and is rumoured for release at some point in 2020.

Are you looking forward to getting a new leg for Devastator? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews!

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 4:47 pm
by Brokebot
As much as I hate the Bayformers, that actually looks interesting. Whether or not its interesting enough to burn cash on remains to be seen. >:oP

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 5:50 pm
by o.supreme
Since there are multiples of many of the RotF constrcticons, there's a potential for many more releases as alternate parts for Devastator. I'd still maybe like to see 2 alternate deluxes for the right arm giving us a 9 component Devastator instead of 8.

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 6:38 pm
by D-Maximal_Primal
He looks good with either a red or yellow leg.

I hope SS goes on long enough to give us a Demolishor in addition to Skipjack, and maybe through in a Payload and someone else in there too, alternate options.

Gosh I love this line

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 6:39 pm
by Emerje
First time I've noticed Hightower's head and neck being used as a thumb. Looks a little silly, mine might go thumbless or maybe I'll just pop his head off...

Hope it's possible to turn Scrapper over without affecting the elbow, otherwise his thumb and fingers end up reversed.

Emerje

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 6:41 pm
by D-Maximal_Primal
Emerje wrote:First time I've noticed Hightower's head and neck being used as a thumb. Looks a little silly, mine might go thumbless or maybe I'll just pop his head off...

Hope it's possible to turn Scrapper over without affecting the elbow, otherwise his thumb and fingers end up reversed.

Emerje

Hightower's hook is supposed to be attached behind his head to make a proper clawed thumb, it isn't in that images

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 7:45 pm
by no-one
Emerje wrote:First time I've noticed Hightower's head and neck being used as a thumb. Looks a little silly, mine might go thumbless or maybe I'll just pop his head off...
The combined duo are pretty flexible. I've seen quite a few combined arm options with one of Scrapmetal's "figures" turned around and used as a thumb or the treads/legs used as thumbs.

Even with the claw mounted the official way the head is still there looking derpy.

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 8:19 pm
by EvasionModeBumblebee
Since we have some visual confirmation of Skipjack, hopefully we’ll see him and Sentinel at NYTF. I’m looking forward to seeing Devastator in the more usual hunched-over pose.

Also tried recreating SS-49 Bumblebee’s pose on the box art!
B8AF162D-F75E-4632-94D2-F09D8D7C31BD.jpeg

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 9:33 pm
by skidflap
D-Maximal_Primal wrote:He looks good with either a red or yellow leg.

I hope SS goes on long enough to give us a Demolishor in addition to Skipjack, and maybe through in a Payload and someone else in there too, alternate options.

Gosh I love this line



Same here. If we do get Skipjack, I can have Bumblebee fighting Rampage as a display.

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 10:01 pm
by Emerje
I'm still trying to figure out how a giant yellow killer robot tractor got named after a tuna.

Emerje

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 10:04 pm
by Jelze Bunnycat
Emerje wrote:I'm still trying to figure out how a giant yellow killer robot tractor got named after a tuna.

Emerje


"Skipping Jackhammer" :P

Hasbro sometimes is a bit... oblivious when it comes to names?

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 10:27 pm
by Sabrblade
D-Maximal_Primal wrote:I hope SS goes on long enough to give us a Demolishor in addition to Skipjack, and maybe through in a Payload and someone else in there too, alternate options.
Redeco Hightower into Hook.

Retool Mixmaster into his alternate-headed version and name him after Quickmix.

Redeco Overload in purple and name him after Frontloader.

Redeco Scrapper in red and name him after Buckethead.

Redeco Scrapmetal (here's the fun one) in an all new blue and red deco with the name "Rumble" in honor of Cybertron Scrapmetal's Japanese name (and as a fun mockery of the FIRRIB/RIRFIB debate by giving him both colors). ;)

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Sun Feb 09, 2020 11:04 pm
by Jelze Bunnycat
Sabrblade wrote:Redeco Scrapmetal (here's the fun one) in an all new blue and red deco with the name "Rumble" in honor of Cybertron Scrapmetal's Japanese name (and as a fun mockery of the FIRRIB/RIRFIB debate by giving him both colors). ;)


:APPLAUSE:

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Mon Feb 10, 2020 6:52 am
by RK_Striker_JK_5
I so need and want those two final Constructicons. This might be the most ambitious combiner I've ever seen from Transformers, and from all appearances, unless there's something majorly bad, they'll have stuck the landing, too. Nice job, designers! :-D :michaelbay:

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Mon Feb 10, 2020 6:56 am
by JoeIsNotCool
My biggest concern is I don't think this will be able to hunch. I have Mixmaster coming in the mail so I can see how he connects to Scavenger then, but I am not sure if the head can angle up much more, he is already looking way down when standing up right. I really hope there is a way to make it work because Devastator needs to be on all fours.

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Mon Feb 10, 2020 7:12 am
by Rodimus Knight
Assuming overload is the red one, what kind of construction equipment is he supposed to be exactly?

Re: Transformers Studio Series Discussion (New 2018 Movie Line)

PostPosted: Mon Feb 10, 2020 9:10 am
by Sabrblade
Rodimus Knight wrote:Assuming overload is the red one, what kind of construction equipment is he supposed to be exactly?
An articulated frontloader.