Page 1 of 3

MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:19 pm
by Razorclaw0000
Site sponsor BigBadToyStore.com has just listed MP-09 Masterpiece Rodimus Prime Version 02, stating:

BBTS wrote:This second release is to have corrected the flaws of the original version.

Please Note: We cannot accept returns or exchanges (from Pile of Loot or shipping returns) on the original version of the MP-09 for the updated version of the MP-09, we apologize for any inconvenience.


Why do not have additional details at this time, but it appears the controversial figure may be tweaked to address some of fans' biggest problems, like paint wear.

In the meantime, you can check out our MP-09 Rodimus Prime Gallery, one of the most comprehensive galleries of the figure so far!

Seibertron.com is your ultimate Transformers resource!

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:20 pm
by Razorclaw0000
What a kick in the dick.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:27 pm
by Powermaster Jazz
eh, I'm happy with mine.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:28 pm
by Bumblevivisector
Well, my being too broke to collect everything I want seems to have a silver lining! I'm actually happy enough about this that I apologize to everyone here who feels kicked...um...down there.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:28 pm
by Galvatrondestroyer
Wow..at least they're fixing this one...unlike Megs. Still, I'll wait to see some reviews before I pull the trigger on this type of purchase.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:30 pm
by robofreak
I'll buy this one. I'll have the money at that time.

Anyways, I think this is the one that should have come out the first time around.

Would have saved a lot of frustration.

You'd think all the product testing these things go through, they would have caught the flaws early on.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:30 pm
by Counterpunch
The problem was not with the quality; the problem was his price was $10 too cheap.

That's being fixed though.

Thank you Takara!

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:31 pm
by Motorthing
Quite happy to know I waited now - after Meg's "cosmic-rust" issue I've been weary of charging in to pick these up straight away, although to be fair Grimlock was totally fine.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:32 pm
by robofreak
Counterpunch wrote:The problem was not with the quality; the problem was his price was $10 too cheap.

That's being fixed though.

Thank you Takara!


Wait, what was original retail on the first run anyway?

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:32 pm
by Jelze Bunnycat
robofreak wrote:I'll buy this one. I'll have the money at that time.

Anyways, I think this is the one that should have come out the first time around.

Would have saved a lot of frustration.

You'd think all the product testing these things go through, they would have caught the flaws early on.


Some flaws only show with "rough play", something that can't really be done at the factories. With that, I'm gonna wait this out.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:35 pm
by paul053
What does this story tell us? When MP-10 comes out and if and only if you want to buy it, don't buy the first version but wait until second version.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:35 pm
by Nemesis Destron
I didn't get this one like most MP's but man what a $#!t sandwich a lot of fans had to choke down on...way to go Takara! :CON:

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:35 pm
by robofreak
JelZe GoldRabbit wrote:Some flaws only show with "rough play", something that can't really be done at the factories. With that, I'm gonna wait this out.



True about play. I missed the first run, so I'll go for this one.

I do want some reviews or a list of all the exact problems they are fixing.

I would like to know if they finally made that spoiler yellow plastic or if it's still painted.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:36 pm
by Sideswipe 00
robofreak wrote:
Counterpunch wrote:The problem was not with the quality; the problem was his price was $10 too cheap.

That's being fixed though.

Thank you Takara!


Wait, what was original retail on the first run anyway?



well to everyone who preordered got it for $200 everyone who else bought it, they got it for $209. But hopefully its not fragile or as fragile as the first version. I soo wanted him...but the with flaws did not justify the $200 price tag. I wonder when Hasbro is releasing theirs...

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:36 pm
by Counterpunch
I like that the news pic is a pic of his crotch.

Hot Rod indeed.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:39 pm
by Immortal Starscream
the only real issue with the origional release was the tolerances. The design has a very precise, low tolerance threshhold, while the factory has a very high tolerance threshold in the manufacturing process, which creates massive issues, such as the floppy vizor on some, while others are too tight to turn. that and takaras legendary quality controll issues. still love my microman acro emperor "sorry, these all come out of the factory broken" classic.

this however im guessing is Takaras release ofHasbro's version of the mold, which im also guessing if we dont see at botcon, we will see at sdcc. it was practicaly a given that Hasbro would tweak the mold so it could work and be sold in the american market.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 2:43 pm
by Sideswipe 00
Immortal Starscream wrote:the only real issue with the origional release was the tolerances. The design has a very precise, low tolerance threshhold, while the factory has a very high tolerance threshold in the manufacturing process, which creates massive issues, such as the floppy vizor on some, while others are too tight to turn. that and takaras legendary quality controll issues. still love my microman acro emperor "sorry, these all come out of the factory broken" classic.

this however im guessing is Takaras release ofHasbro's version of the mold, which im also guessing if we dont see at botcon, we will see at sdcc. it was practicaly a given that Hasbro would tweak the mold so it could work and be sold in the american market.


yeah cause this will have a $70-$90 price tag and quite a bit of parents will buy this for their kids. a few of my little cousins have Masterpiece Grimlock. And they are ages 5-11. Nothing broken (which is a big surprise actually lol) If they were given Masterpiece Hot Rod, he would be a pile of plastic pieces by the end of the day XD. (with the first version)

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 3:01 pm
by Razorclaw0000
Counterpunch wrote:I like that the news pic is a pic of his crotch.

Hot Rod indeed.


I did that just for you.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 3:05 pm
by NamelessOne
Razorclaw0000 wrote:What a kick in the dick.


This. Why did I bother giving these guys my money in the first place?!? :BOOM: :sad: :evil:

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 3:21 pm
by NTESHFT
Galvatrondestroyer wrote:Wow..at least they're fixing this one...unlike Megs. Still, I'll wait to see some reviews before I pull the trigger on this type of purchase.



What were some problems with Megs, other than couldn't keep his arm up due to the weight of the scope? I haven't noticed anything with mine.

I do plan on getting this one. I'll have the money for it by the time it comes out. But what do they plan on doing with the first version if this one is supposed to be way better?

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 3:48 pm
by --B--
Razorclaw0000 wrote:What a kick in the dick.



Perfect usage of this phrase.

I may be tempted to pick this up, but I always disliked the Rodimus Prime vehicle mode, so I may wait for the hasbro version.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 4:08 pm
by starfish
It wasn't just the spoiler and visor issues, though, there were tonnes of little glitches.

Some copies of the figure have major misalignment problems.

My own copy suffers from the fact that one of the leg joints is misaligned (I've tried repairing but to no avail), which means that the left leg is never quite lined up inside the body, which leads to a number of other issues - it means the right arm can't peg back onto the body in car mode, the left shin flap can't peg into the crotch, and the pipes on that side don't connect properly in car mode. And all this from the *slightest* manufacturing glitch!

That said, I know a lot of people who were always going to get two copies of this figure - one to display as Rodimus and one as Hot Rod, or one in robot mode and one in vehicle mode - so buying it twice isn't a major headache.

Besides which, don't we know already that the Hasbro version is going to come with an (as yet undisclosed) exclusive accessory? Rumours abound on a Targetmaster partner.

Whatever the outcome, I'll probably get the Hasbro version at some point down the line, just as I had always intended - the Takara one can stay in robot mode and donate his trailer to the Hasbro copy.

Thankfully the movie line doesn't interest me at all (shellformers and giant backpacks I can do without, thanks), so my Transformers budget is ready to be blown on a new Hasbro Roddy!

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 4:43 pm
by Kibble
NaM3L3sS wrote:
Razorclaw0000 wrote:What a kick in the dick.


This. Why did I bother giving these guys my money in the first place?!? :BOOM: :sad: :evil:

Thris. Glad I got to be a $200 guinea pig, though...

It's **** like this where I can almost understand the jackasses that pull the ol' switcharoo return jobs. Here it's almost actually tempting! They're not as stupid as Walmart, though, so I'm sure they'll be looking for this very thing.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 5:13 pm
by chuckdawg1999
I had to laugh at the little note about not taking back or exchanging any of the Rodimi from the first run.

Re: MP-09 Masterpiece Rodimus Second Version

PostPosted: Wed May 11, 2011 5:26 pm
by WeatherManNX01
Gotta say, I'm a bit annoyed.

If this released had come even just a year down the road, I'd be okay with it. But for Takara to fix it up so soon after initial batches went out, that's kinda hard to swallow.

I have learned one thing, though: Takara almost always does a second run. Probably worth it to wait in the future. *cancels MP-10 preorder*