Page 12 of 18
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Wed Apr 26, 2017 10:34 pm
by Ultra Markus
william-james88 wrote:I do find this better than the movie designs for Megatron in the first two films. I dont see why this wouldnt have worked in a film, same with that Optimus they have coming out.
i hear ya! micheal bay needs to take a few notes here
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Wed Apr 26, 2017 10:43 pm
by Deadput
william-james88 wrote:I do find this better than the movie designs for Megatron in the first two films. I dont see why this wouldnt have worked in a film, same with that Optimus they have coming out.
Eh it's easier sometimes to make a design look better in a static image compared to a moving scene but maybe change the head to the ROTF Megatron helmet which actually looks pretty great and this would be good design.
Also change the cannon to look a little less cartoony since right now it doesn't really fit with the rest of him. (In my opinion of course)
Prime 1 Studio Megatron Gold Edition – Transformers Generation 1 Pictures
Posted:
Sat Apr 29, 2017 12:01 am
by WreckerJack
Some images of Prime 1 Studio's Megatron Gold Edition statue have surfaced
via facebook. This statue will stand 23 inches in height and will include LED eyes. If you like Megatron but perfer the look of the live action films there is a
Prime 1 Studio Superior Megatron.
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat Apr 29, 2017 2:08 am
by Regimus Prime
Nice but, not a big fan of the gold. The regular colored version and the Optimus Prime are excellent though.
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat Apr 29, 2017 5:23 am
by Kurona
There we go; it was so obvious there was going to be a gold repaint of MP-36--
... oh, uh, it's the Prime 1 statue. huh.
Images of Prime 1 Studio MMTFM-11 Ironhide
Posted:
Sat May 27, 2017 4:42 am
by Va'al
Courtesy of Baidu user
漫城工作室, we have a whole truck load of images of the Prime 1 Studio Museum Masterline series Ironhide figure, from the first Transformers live-action movie! You can check out the 24-inch statue below with all its accessories, and find out more about it too.
Prime 1 Studio is proud to present MMTFM-11 IRONHIDE from Transformers (2007)
Autobots weapons specialist and Optimus Prime's old friend. He is old because he is hard. He's probably had enough replacement parts to build a small army, but Ironhide doggedly refuses to roll over and die for anyone.He'll fight to the bitter end and take down more than his fair share of Decepticons in the process.
Statue Features:
– 24 Inch tall
– LED light up function on head.
– LED light up function on both arms cannons.
– LED light up Function on Chest.
Exclusive version:
– Brawl Head
Edition Size:
Exclusive version: 500
Regular version: 1000
Retail Price: 1599$USD
– Production sample shown.
– Product details could be subjected to change without further notice.
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat May 27, 2017 5:15 am
by Carnivius_Prime
Looks awesome. Does 'Brawl head' mean the head of the Decepticon Brawl as some kinda trophy thing or is it a battle mask alternate head for Ironhide?
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat May 27, 2017 11:32 am
by Va'al
Carnivius_Prime wrote:Looks awesome. Does 'Brawl head' mean the head of the Decepticon Brawl as some kinda trophy thing or is it a battle mask alternate head for Ironhide?
Y'know, I thought it might be part of an upcoming figure, but now that you say that...
Images of Prime 1 Studio Transformers: The Last Knight MMTFTM-16 Optimus Prime
Posted:
Wed May 31, 2017 3:01 pm
by Va'al
Prime 1 Studio, over on
Facebook, has uploaded a whole new album of image about a whole new figure from the upcoming live-action movie Transformers: The Last Knight - Optimus Prime himself! The highly detailed non-transforming statue comes with faceplate and mouth headsculpts, removable and storable shield, poseable arms, Temenos sword, LEDs, base, and his new feature from the trailers: the arm spike. Check out some of the images below, and the full set
here!
Re: Images of Prime 1 Studio Transformers: The Last Knight MMTFTM-16 Optimus Prime
Posted:
Wed May 31, 2017 3:34 pm
by Carnivius_Prime
Holy... that thing is a frickin' masterpiece. I needs to win the lottery super like now!
Teaser for Prime 1 Studio The Last Knight Megatron
Posted:
Fri Jun 02, 2017 4:40 am
by Va'al
Coming shortly after their Transformers: The Last Knight Optimus Prime statue,
Prime 1 Studio have teased an accompanying figure to join the line: Decepticon leader Megatron, in his new live-action movie look! Take a look at the image mirrored below, and let us know what you think in the Energon Pub.
One of the most feared Decepticon is returning in the upcoming Transformers Movie "The Last Knight". We are excited to tease the perfect companion piece to The Last Knight's Optimus Prime release this week. This will look amazing when displayed together. What do you guys think ?
Please leave a comment below!
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Fri Jun 02, 2017 4:50 am
by Carnivius_Prime
Aw man. More very cool rich folk stuff.
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Fri Jun 02, 2017 7:47 am
by D-Maximal_Primal
That is gorgeous... I want it
Prime 1 Studio At Transformers: The Last Knight Event in Malaysia
Posted:
Fri Jun 02, 2017 2:24 pm
by Sigma Magnus
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Fri Jun 02, 2017 6:00 pm
by Sabrblade
What did they do to Primal's mouth?
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Fri Jun 02, 2017 8:12 pm
by Viollustre
Ye they went with the faceplate over the mouth. There are also going to be giant 10-foot-tall Bee and Prime statues displayed, but they weren't set up yet when I went.
There also was a display featuring toys from all the 5 movies, where in the miserable TLK section, I believe I have spotted the Taiwan TRU Lucky Draw Optimus Prime and Bumblebee!
Images of Prime 1 Studio Transformers: The Last Knight MMTFTM-17 Megatron
Posted:
Thu Jun 15, 2017 12:52 pm
by Sigma Magnus
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Fri Jun 16, 2017 4:12 am
by Big Grim
Gotta admit, I am loving this Megatron design. It's bloody gorgeous!
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat Jun 17, 2017 2:55 pm
by D-Maximal_Primal
Reasons why I need to be more attractive and in shape: I can work the corner to afford this badass piece of awesomeness
New Teaser for Prime 1 Studio Transformers: The Last Knight Onslaught
Posted:
Sat Jul 15, 2017 2:24 am
by Va'al
Via the official Instagram
account of Japanese company Prime 1 Studio, we have a new teaser for their movie line of licensed Transformers statues, moving to The Last Knight for a new character: Decepticon Onslaught! Check out the image mirrored below.
Teaser of the day for our Transformers fans!
#transformers #transformersthelastknight #thelastknight #teaser #prime1 #prime1studio
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat Jul 15, 2017 4:32 am
by Carnivius_Prime
Is cool but how do they choose who gets a figure cos this sure makes it seem like on-screen time isn't a factor.
Though nor did it to Hasbro when releasing several toys of Berserker who only appears for a five seconds in the film and doesn't get to go with the other 'cons.
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat Jul 15, 2017 6:52 am
by Palo_zfogs
Oh yeah! Some product representation of Onslaught. At last!
The teaser looks EXTREMELY awesome! Can't wait to see the whole figure! Whooooooo!
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sat Jul 15, 2017 9:55 am
by Evil Eye
This makes me very sad Onslaught didn't get to do anything. Even for a digital remold, that design is awesome. I'm extra angry due to the promise that "Nothing can prepare you for Onslaught" when in reality he ended up pulling a Glonk- doing absolutely nothing and dying. (Anyone who gets that reference gets a cookie.) Makes me wonder if there's some behind the scenes drama we don't know about.
Hopefully the Bumblebee movie will be successful enough that the "Decepticonvicts" will get their own spin-off where they actually get some development. I want some more Nitro Zeus goddamnit!
With regards to the statue itself, it looks amazing but I don't have the budget to be buying a hyper-costly, xbox hueg immobile statue of a character who did absolutely bugger all. Now, if it were a smaller, less expensive "build it yourself" resin garage kit I might buy it, mainly because of my love of modelling.
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sun Jul 16, 2017 10:57 am
by Palo_zfogs
Black Hat wrote:This makes me very sad Onslaught didn't get to do anything. Even for a digital remold, that design is awesome. I'm extra angry due to the promise that "Nothing can prepare you for Onslaught" when in reality he ended up pulling a Glonk- doing absolutely nothing and dying. (Anyone who gets that reference gets a cookie.) Makes me wonder if there's some behind the scenes drama we don't know about.
Hopefully the Bumblebee movie will be successful enough that the "Decepticonvicts" will get their own spin-off where they actually get some development. I want some more Nitro Zeus goddamnit!
With regards to the statue itself, it looks amazing but I don't have the budget to be buying a hyper-costly, xbox hueg immobile statue of a character who did absolutely bugger all. Now, if it were a smaller, less expensive "build it yourself" resin garage kit I might buy it, mainly because of my love of modelling.
Yeah, that was one of my main problems with the movie. They hyped the TLK Decepticons up until I even thought that at least one of the AOE Autobots was going to get killed by them. What happened actually was entirely opposite.
But then like you said, if all those "Punks" from TLK gets their own spin-off, it'll be FRIGGIN' awesome!
Re: Prime 1 Studio Museum Masterline Series Discussion
Posted:
Sun Jul 16, 2017 12:57 pm
by Sabrblade
Coupled with the early wave character choices of the TLK toyline, this just goes to show how both Hasbro and Prime 1 Studio evidently had no idea who was and who wasn't going to prominently featured in the movie, with both apparently choosing their selection of character product based on guesswork more than anything.