Seibertron.com Energon Pub Forums

[BW] Rainmaker wrote:Aw yeahhh

also there's a bit of hair/plastic coming off on Grax's arm

That shows how manly he is.

I remember loving these as a kid, but look at that impressive articulation. Hardhead had a grand total of 6 points of articulation (shoulders, wrists, and toes) and all were required for transformation. These guys have slightly more in that they have elbows and knees. So happy for the updates that are coming. It's also hard to go Takara screen accurate on their updates since I fell in love with the toys, not the characters since I'm American and didn't know about the comics until much later. These toys and their bios are the only thing I really know about them (Rebirth doesn't count). I always loved how Mindwipe looked like a cross between Ratbat and Soundwave. Not to mention transformers with cockpits!

in spite of not being too fond of animal transformers (the concept bugs me) these guys were amongst my faves. Had weird wolf and mindwipe and I struggle to recall if I ever had seen skullcruncher in the shops as a kid.

weird wolf is still in quite a good condition. Mind wipe got quartered in an epic battle or two.

We gave you a taste of Galvatron in the new Titans Return line, so we decided to head back in time - time being the key word - to 2006 and the one and only e-Hobby exclusive that represents in plastic form Galvatron II!

The character is an alternate timeline version of the original reformatting of Megatron, in the Takara release of the toy colour scheme, a triumphant Unicron's servant who rules over Earth, but forced once more to complete the Chaos-Bringer's task of destroying Cybertron - as seen in Marvel's Transformers comics. The toy in the gallery below is the only official version of this character, and includes new stickers, new Japanese sound clips, and a Creation Matrix in green diecast. Check it out!

e-Hobby Exclusives Galvatron II (164 images) - Miscellaneous

Love this dude especially his new soundclips and his pimp Flavor Flav style matrix.

I shoulda bought this guy when he was new, but I opted Mr.Purple. Also, it bugs me how Mr.Purple is constantly mistaken for the E-Hobby version of the two when this fella is actually the exclusive

He has the purple Galvatron's retooled face, right?

MaverickPrime wrote:He has the purple Galvatron's retooled face, right?

Yes he does, which I didn't know until I opened my sealed Galvatron II yesterday. I was expecting the unaltered face, but should've have known it'd be the other. Sticker placement was a little confusing since the instructions were a little different from the original.

I really wanna get a G1 Galvatron, I don't know what it is, but while the first time I saw it I was repelled by how inaccurate it was, over time, I've come to be really enchanted by his design, specially after I learned he actually had hips AND knees that could move!
At first I thought "hey, I'll try to get the beautifully accurate purple one!" But I've come to terms with the grey toy, so really, all I want is one in good condition, regardless of the colors.

Used to love him as a kid. Having missed out on the first year releases home and ultra manus were my leaders till PM Optimus prime came along.

Seeing him shot in such details makes me ponder as to how I handled the disconnect between the cartoon and toy.

his leg joints did indeed mean he was amongst the most articulated toys of his day. Also did quite enjoy his gun mode as ridiculous as it was.

For those unaware, the new sticker decals included with the Galvatron II figure are based on an appearance of Galvatron as seen in this TV Magazine story page by Studio OX:



Though, at the time of this image's publishing, the Galvatron II character hadn't existed yet (he wouldn't exist until Simon Furman's creating him for Marvel G1 in 1990) so this early appearance of Galvatron fighting alongside Megatron, at a point that preceded both the 1986 movie and season 3, was either an intentional ruse meant to avoid spoiling Megatron's upgrade into Galvatron, or a case of the Japanese artists and writers honestly being unaware at the time that Megs and Galvy were supposed to be the same character, which is possible but we simply don't know.

With this e-HOBBY release taking inspiration from the pre-Movie Japanese appearances of Galvatron, one can think of the early Galvatron appearances as now being appearances of Galvatron II instead. Retcons!

The vintage Galvatron needs no matrix on a chain, since his is on the inside.

If you don't get that joke, see http://www.seibertron.com/transformers/ ... rive/35820

We have another treat for you all, Seibertronians, as site owner Seibertron has taken out some Platinum Edition toys to show off. This time? Decepticon purple space t-rex Trypticon! Along with Full Tilt and Brunt, the ship/base/muncher wanders into the Platinum line, with a tweaked deco, a new box, comparison shots with original G1 version - stay tuned for more on that too...

With the current Titans Return iteration of the same character at retail - whose gallery you can find here - this is the best time for a dive into recent nostalgia, before the main event. Check out the sample images below, and click on any of them to access the full gallery!

Platinum Edition Trypticon (182 images) - Miscellaneous














Platinum Edition Full-Tilt (70 images) - Miscellaneous






Platinum Edition Brunt (27 images) - Miscellaneous

While photographing the HasLab crowdfunded War for Cybertron Trilogy UNICRON, I decided it was best to also knock out galleries for Platinum Unicron with Kranix as well as Encore Unicron of Light with Bug. I figured when else was I going to transform all of these Unicrons again in the near future? Platinum Unicron is the newest release of the "G1" styled Armada Unicron with a lighter shade of "blue" for the planet mode parts and includes Kranix which is essentially the same deco as the version which came with the 2011 Amazon exclusive Unicron. The Encore "Unicron of Light" figure is meant to be an homage of the Lucky Draw release, of which we had the pleasure of photographing WAY back in 2010 (courtesy of fellow Seibertronian JRFitzpatrick7). Without further ado, check out the highlights below of Encore Unicron of Light and Platinum Edition Unicron!

---

Transformers Encore Unicron of Light (139 images) - Supreme Class
























Transformers Encore Dead End (66 images) - Mini-Cons












Platinum Edition Unicron (142 images) - Supreme Class




























Platinum Edition Kranix (69 images) - Mini-Cons, Supreme Class

Green Unicron is really cool, but it suffers from some severe mold degradation. 'Tis what happens when its the latest release of a most that's been used so much. Still, it's really cool to have what is essentially a "Good Guy Unicron toy", what with this not actually being Unicron himself but an energy doppelganger made up of Mini-Cons.

Platinum Edition Unicron, on the other hand, I was more than happy to skip. Lazy reuse of the Amazon deco, but made worse with that baby blue. Say what one will about what shade of blue/gray Unicron is, we can all agree that he isn't that shade. So glad they did not use it for the HasLab figure.

Still, it is cool that you got his eyes changed from red to green. Nice work.

Sabrblade wrote:Green Unicron is really cool, but it suffers from some severe mold degradation. 'Tis what happens when its the latest release of a mold that's been used so much.

Surprisingly, my Green Unicron feels more stable than the Platinum Unicron. It's easily the worst of my bunch (though Energon Unicron hasn't faired that well either). My Platinum Unicron suffered from the right side of the crotch piece constantly falling off as well as one of the planet maw shell wing pieces on his back.

Sabrblade wrote:Platinum Edition Unicron, on the other hand, I was more than happy to skip. Lazy reuse of the Amazon deco, but made worse with that baby blue. Say what one will about what shade of blue/gray Unicron is, we can all agree that he isn't that shade. So glad they did not use it for the HasLab figure.

I absolutely agree. It's a really bad blue. The Amazon one is a weird blue also. I don't know what color I think Unicron's planet mode should be, but it's not any of those for sure. I still am not a big fan of the shade used for HasLab Unicron either. I wish they had done something unique with it that had a bluish gray swirly sheen to it or something. Just something unique so that it looked grayer in some lights and bluer in other lights.

Sabrblade wrote:Still, it is cool that you got his eyes changed from red to green. Nice work.

That was the big draw for Platinum Unicron. He came with the green eyes ... but it's too bad that the LED light is still red instead of green. The pics of his head opened up was me trying to fix the light up feature. Out of the box, mine didn't work. I have no idea what I did to fix it, but when I reassembled the head the lights worked. I'm assuming there was a pinched wire or something.

One peculiar oddity about Platinum Unicron is that they changed the orientation of the batteries for just that release. Every other Unicron I have had the batteries facing the same direction, but just Platinum Unicron has the batteries so one is facing positive up and the other is facing negative up.

Seibertron wrote:

Sabrblade wrote:Platinum Edition Unicron, on the other hand, I was more than happy to skip. Lazy reuse of the Amazon deco, but made worse with that baby blue. Say what one will about what shade of blue/gray Unicron is, we can all agree that he isn't that shade. So glad they did not use it for the HasLab figure.

I absolutely agree. It's a really bad blue. The Amazon one is a weird blue also. I don't know what color I think Unicron's planet mode should be, but it's not any of those for sure. I still am not a big fan of the shade used for HasLab Unicron either. I wish they had done something unique with it that had a bluish gray swirly sheen to it or something. Just something unique so that it looked grayer in some lights and bluer in other lights.

My ideal shade would be a nice halfway between the blue of the Amazon and HasLab Unicrons and the gray of Welcome to Transformers 2010 Unicron.

I can't believe I have that same stand, and I still can't quite get Unicron of Light on it. It's a gorgeous Unicron, the only one I really need

could you image the haslab unicron coming in the armada, unicron of light and the dark unicron colors

D-Maximal_Primal wrote:I can't believe I have that same stand, and I still can't quite get Unicron of Light on it. It's a gorgeous Unicron, the only one I really need

You might just need to tighten the screws, though trust me I had to play around with them so that they would sit properly and not topple over. I got it to work for my galleries, but I dont know about leaving them on a shelf on those stands unless you superglued the base of the legs of one of the stands in place.

Ultra Markus wrote:could you image the haslab unicron coming in the armada, unicron of light and the dark unicron colors

I can definitely imagine it! I'd really like to get Haslab Unicron in the Energon black color scheme. It's my favorite and it is different enough that I think its fair to people who thought this was a one and done thing.

Seibertron wrote:

Ultra Markus wrote:could you image the haslab unicron coming in the armada, unicron of light and the dark unicron colors

I can definitely imagine it! I'd really like to get Haslab Unicron in the Energon black color scheme. It's my favorite and it is different enough that I think its fair to people who thought this was a one and done thing.

It's my favorite too

love the overhead view of the 5 planets...

they look like synchronized swimmers...

Seibertron is revving up gallery production again! As always, they're the most comprehensive, striking galleries around, and this time, he's going all the way back to G2! Given that the just released Legacy line has a Leader class figure of the Autobot commander Optimus in an updated version of his G2 form (which you can see a gallery of here), it seemed only natural to create galleries of the bot who inspired it.

In these new galleries, we not only get Legacy Leader Prime's inspiration, 1995's G2 Laser Optimus Prime (and all his light-up gimmick glory) , but we get a couple of rare redecos of the mold. The rarest version of that G2 mold is Laser Ultra Magnus, released by e-hobby back in 2006. The Laser Ultra Magnus figure came in a box meant for Laser Prime, and even included his stickers. It used the tooling of the original redeco of the mold, RID Scourge, but was a completely different deco based on G1 Ultra Magnus' inner robot. The next is of Year of the Goat Optimus Prime, a partially translucent plastic version of the mold released in 2015 in the Platinum Edition line (which still included the light up electronic features).

And now on to the galleries! Please click on any picture below to feast your eyes on all this G2 and G2 inspired goodness.

Generation 2 Laser Optimus Prime (123 images) - Laser Rods (Illuminators)


















Generation 2 Laser Ultra Magnus (90 images) - Laser Rods (Illuminators)


















Platinum Edition Year of the Goat Optimus Prime (107 images) - Miscellaneous

And yet, still no Power of the Primes

Anyway, gonna go look at that Laser Magnus gallery