Seibertron.com Energon Pub Forums

[Jelze Bunnycat]

I wonder if it would be a repaint/remold of the upcoming Combiner War figures. Especially with the line about them being Cybertron's only hope. Combining into one big bot could stack the odds plenty in your favor. Any way just some wishful thinking.

As a rule of thumb, no current line molds can be used by the club. It's all a matter of availability: FunPub can't use any mold that Hasbro is already using for the production of their own figures. Thrilling 30's and older are fair game, with the caveat of the state of the tooling (UT molds are very much a risk as FunPub has stated some have deteriorated pretty badly at this point).

[Amelie]

I personally somehow see the words "Renegades", "Thief" and "Muscle" as being big clues here....

Thief - Swindle
Muscle - Brawl
Bounty Hunter - Vortex
Loose Cannon - BlastOff
The Boss - Onslaught.

I actually made this prediction to JelZe in a chat a while ago, before the clues.

[Rodimus Prime]

I personally somehow see the words "Renegades", "Thief" and "Muscle" as being big clues here....

Thief - Swindle
Muscle - Brawl
Bounty Hunter - Vortex
Loose Cannon - BlastOff
The Boss - Onslaught.

I actually made this prediction to JelZe in a chat a while ago, before the clues.

I suggested these a couple of pages ago as well, and I hope it's true. A set made of an actual team (much like 2011's Stunticons set) would be better than a bunch of different characters scraped together.

[Jelze Bunnycat]

I personally somehow see the words "Renegades", "Thief" and "Muscle" as being big clues here....

Thief - Swindle
Muscle - Brawl
Bounty Hunter - Vortex
Loose Cannon - BlastOff
The Boss - Onslaught.

I actually made this prediction to JelZe in a chat a while ago, before the clues.

I suggested these a couple of pages ago as well, and I hope it's true. A set made of an actual team (much like 2011's Stunticons set) would be better than a bunch of different characters scraped together.

Here's my counterpoint: What's the use of the Combaticons for the BotCon set? We all know FunPub's penchant for the obscure and not-so-obvious, plus, if we did get them, I highly doubt they'd use the FOC molds. It would be just a glorified Bruticus gift set, even more glorified than the G2 decos. And nobody would want that for BotCon...

And pre tell, when did Vortex jump from Interrogator to Bounty Hunter?

[Rodimus Prime]

Here's my counterpoint: What's the use of the Combaticons for the BotCon set?

That all depends on the backstory and how well it would incorporate the characters.

We all know FunPub's penchant for the obscure and not-so-obvious, plus, if we did get them, I highly doubt they'd use the FOC molds.

I wouldn't want the FoC molds used. Who says they have to be molds that were used for previous incarnations of the characters? I keep going back to the TFA Stunticons of 2011. They were molds from the same line, but of 5 different characters. I do concede 1 point, though: The Combaticons might not be obscure enough to be in the set, especially since they were featured in FoC.

It would be just a glorified Bruticus gift set

And? The 2011 set wasn't a Menasor gift set. This doesn't have to be.

And pre tell, when did Vortex jump from Interrogator to Bounty Hunter?

It doesn't exactly have to be "bounty hunter." I see him as more the loose cannon. Him or Brawl. Besides, there was no bounty hunter in the Combaticon lineup, so someone has to change. If the Combaticons were to be the characters.

[Sabrblade]

In an attempt to veer away from GotG comparisons, as that movie likewise borrowed an existing concept, this could also be like "The A-Team in space" (which GotG basically was as well), or "Han and Chewie with three more rogues". In fact, one could use Star Wars characters in these roles:

The Thief - Han
The Muscle - Chewie
The Bounty Hunter - Boba Fett
The Loose Cannon - Lando
The Boss - Jabba the Hutt

[Mindmaster]

Will have to see what characters are getting the treatment before deciding if I want to get in on this set. Had to miss out on 2014 due to financial reasons, and it's a possibility I might, once again, miss out on this year, too.

[Mkall]

I'm wondering is "The Boss" is actually Boss. He looks like he could be done from Generations Drift/Blurr:

[Sabrblade]

Honestly, I really hoping that the characters are not all from the same team/world. Given that the story's set in Axiom Nexus of all places, I would hope for Fun Pub to take full advantage of that setting by giving us one of the most wildly diversely creative sets ever, full of different characters each from who-knows-where that are brought together as a ragtag band of misfits.

Like (as I suggested before), a G1 dude, a Beast Era dude, a Unicron Trilogy dude, a Movieverse dude (from a mold the Club can use), and an Animated dude. Five outlaws, each wanted from a different world for different reasons.

Having them all come from the same existing team and world would just feel so underwhelming to me by comparison, what with the story being set in a place limited only by one's own imagination.

[jamarmiller]

if they do an ELITA 1 they better tell me now so I can cancel that third party one

[Sabrblade]

if they do an ELITA 1 they better tell me now so I can cancel that third party one

What existing mold would it be made from that you'd be willing to have it made from?

[jamarmiller]

Arcee , the backpack would make it an easy remold, you could practially remold that piece into anything and have a new vehicle. then of course a new head

[Jelze Bunnycat]

Arcee , the backpack would make it an easy remold, you could practially remold that piece into anything and have a new vehicle. then of course a new head

Too recent, plus the limit of pieces retooled is 1, usually the head. 2007 Thrust had retooled wings, but no new head, so it was still within said limit. Maybe next year.

[jamarmiller]

that makes me very happy to hear ! as Id rather see a mass retail version. Hopefully Hasbro does it then instead

[Jelze Bunnycat]

that makes me very happy to hear ! as Id rather see a mass retail version. Hopefully Hasbro does it then instead

There already is a Classics Elita-1, though she's a mere redeco:


Left: BotCon 2009 Elita-1
Right: Cybertron Thunderblast

[Sabrblade]

Three more Tweets - https://twitter.com/BotCon

We're ready whenever you all are to put the rough for page 1 of the comic! Just need those last couple dozen retweets.

We are here. We... are waiting.

Oh. And looks like you're gonna learn the artist on the comic as well!!!

[Emerje]

Combaticons? No thanks. They won't do the FOC figures because they're all deluxe class when the last time they did five deluxe figures they were accompanied by a Voyager, otherwise the last two sets have been three deluxe and two Voyagers. Since this appears to be a five figure set we can probably expect three deluxe and two Voyagers (the muscle and the loose canon if going with the GotG thing) again.

I don't know why anyone would want a repeat of the BotCon Stunticon set. I'd rather have Transformers that don't transform than combiners that don't combine. It's an especially bad idea at a time when we have some really cool combiners coming out. Plus there's a really good chance that Hasbro will be using the Combaticons for CW so they'd be off limits anyway.

And really, a combiner box set featuring Axiom Nexus had better be an updated Nexus Prime considering the nature of both.

Emerje

[Sabrblade]

250 retweets achieved! Comic page 1 preview should be on its way!

[Sabrblade]

https://twitter.com/BotCon/status/550828625831141376

Preview of page 1 from Timelines Issue 11: Cybertron's Most Wanted! Available at BotCon 2015! http://BotCon.com

[Mindmaster]

https://twitter.com/BotCon/status/550828625831141376

Preview of page 1 from Timelines Issue 11: Cybertron's Most Wanted! Available at BotCon 2015! http://BotCon.com

So we can confirm that one of the figures uses Springer as a base mold. Maybe Windblade?

[Sabrblade]

So we can confirm that one of the figures uses Springer as a base mold. Maybe Windblade?

Windblade's probably too new to use, so that might just be Windblade herself.

The Springer mold, however, is a definite possibility. Could be one of the five outlaws, could be an at-show exclusive, or it could just be Springer himself.

[jamarmiller]

that makes me very happy to hear ! as Id rather see a mass retail version. Hopefully Hasbro does it then instead

There already is a Classics Elita-1, though she's a mere redeco:


Left: BotCon 2009 Elita-1
Right: Cybertron Thunderblast

yeah, I throw up every time I see that one too, Thanks for bringing last nights dinner back up

[SW's SilverHammer]

https://twitter.com/BotCon/status/550828625831141376

Preview of page 1 from Timelines Issue 11: Cybertron's Most Wanted! Available at BotCon 2015! http://BotCon.com

Now my question is, how does mechagodzilla fit into all of this

[Seibertron]

that makes me very happy to hear ! as Id rather see a mass retail version. Hopefully Hasbro does it then instead

There already is a Classics Elita-1, though she's a mere redeco:


Left: BotCon 2009 Elita-1
Right: Cybertron Thunderblast

yeah, I throw up every time I see that one too, Thanks for bringing last nights dinner back up

[Sabrblade]

Awesome!

All we need now are toys of Lancer and Greenlight.