Seibertron.com Energon Pub Forums

News Credits: 5749 · by **El Duque** » Fri Sep 02, 2011 11:22 am

Site sponsor TFsource has just sent us some new high quality in-hand images of FansProject CA-04 Causality Stormbomb. Additionally it looks like the fine folks at FansProject have included a replacement set of blades/claws for CA-03 Thundershred, due to all the QC issues fans were experiencing.

CA-04 Causality Storbomb is in-stock and ready to ship, orders can be placed by clicking here.

News Credits: 5 · by **Doctor McGrath** » Fri Sep 02, 2011 11:25 am

Good call on FP's part to include the replacement weapon. Now, people can hop back over to the "All Hail FansProject" train. :lol:

by **Burnin12** » Fri Sep 02, 2011 11:40 am

Ha Ha I all ready had bought a used second Thundershred because I all ready busted a tab off a claw and could never had the long pinchers in alt mode. I'm going to have 3 times the blades now!!! Kinda Awesome since I really don't mind having 2 Thundershreds anyway!

Kind of odd we're just now getting the "official images" now though. I all ready got my shipped notification from BBTS and I'm sure I'm not the only one.

News Credits: 11 · by **kirbenvost** » Fri Sep 02, 2011 11:46 am

Say what, replacement weapon? Man, I am out of the loop. First I heard of problems with it. Lucky for me, I dont even have my Thundershred yet! :lol:

These pics are looking a little washed out, but no doubt he's awesome. Once I get some Decepticon symbols on there.

News Credits: 23 · by **Prime Evil** » Fri Sep 02, 2011 11:57 am

REPLACEMENT WEAPONS?!?! Awwww gee thanks FP. I was able to modify my original set, but definite appreciate looking out for those that have a busted one. Now THAT'S customer service.

FansProject = For the Eternal Win

News Credits: 1 · by **Sodan-1** » Fri Sep 02, 2011 11:57 am

Are we to assume that the whole new shuriken weapon means that the blades have been redesigned? If not, then what's the point? Goes to show though that even on the rare occassion FansProject's quality lets you down their fan service has got our backs.

Stormbomb is looking very awesome! Nice work indeed. I wonder if we'll have to wait another month for Backfiery incase there are any issues with Stormbomb.

News Credits: 335 · by **Down_Shift** » Fri Sep 02, 2011 1:02 pm

What other issues are people having with Thundershred? My arms are ridiculously loose, but no issues with the claws on my end. The legs also don't connect to the pegs in alt mode.

News Credits: 5749 · by **El Duque** » Fri Sep 02, 2011 1:06 pm

Down_Shift wrote:What other issues are people having with Thundershred? My arms are ridiculously loose, but no issues with the claws on my end. The legs also don't connect to the pegs in alt mode.

A lot people have had either the pegs break off the end of the claws where they insert into the gauntlets or had teh gauntlets stress and crack. Mine are super tight, but I've experienced no damage.

News Credits: 335 · by **Down_Shift** » Fri Sep 02, 2011 1:32 pm

El Duque wrote:
Down_Shift wrote:What other issues are people having with Thundershred? My arms are ridiculously loose, but no issues with the claws on my end. The legs also don't connect to the pegs in alt mode.

A lot people have had either the pegs break off the end of the claws where they insert into the gauntlets or had teh gauntlets stress and crack. Mine are super tight, but I've experienced no damage.

Oh ya, I forgot about the claws. Mine are as tight as a nun on Sunday.

by **NTESHFT** » Fri Sep 02, 2011 2:17 pm

Hey- I never doubted them for a micro second! Can't wait til mine comes in.

News Credits: 187 · by **GetRightRobot** » Fri Sep 02, 2011 2:29 pm

I have had no problems with my claws, but I will take another set, I can try out a chroming technique I've recently learned about. How bout TFSource.com? You shipped mine yet? :BANG_HEAD:

by **conbot3** » Fri Sep 02, 2011 2:33 pm

Just placed an order for stormbomb :grin:

, just have to contact repro labels for a set of stickers to be made.

Website · by **Leviathan** » Fri Sep 02, 2011 3:35 pm

I can't wait till I get this. Really happy about the replacement weapons, the port on one of Thundershed's blades broke. made me sad. It happened on the day I got it to, which made me even more sad. Now, I wonder if FP is going to re-release these guys in the colors of the e-Hobby Takara Insecticon clones. I think they would look good in the red colors. and I would love it if they did their own version of the Deluxe Insecticons. That would make me, and many others, extremely happy. That way, I would have a complete set of Insecticons.

Website · by **DMSL** » Fri Sep 02, 2011 3:40 pm

My Thundershred had gauntlets that were ridiculously tight. You had to click the blades in and then you coulden't get them out. I tried pulling hard and snapped one peg off. I then used some tools to press the others out from the inside and managed to salvage two blades. I contacted TFsource and they sent me two replacement blades which is awesome.

I used a disposable file, cut it to size with a hobby knife and then i used that on the slots in the gauntlets. Now they still are rather tight but you can easily remove them and they don't break.

I just ordered my Stormbomb from TFsource and can't wait to get it and see what Fansproject have done with the replacement blades. If they are redesigned i hope they will fit in the gauntlets.

News Credits: 14 · by **DecepticonFinishline** » Fri Sep 02, 2011 4:16 pm

That's great about the replacement blades... But... I still have a small piece of plastic in the wrist gauntlet part... :/

by **necr0blivion** » Fri Sep 02, 2011 4:31 pm

Can anyone verify if the replacement pieces are just a copy of the original or if they were tweaked to fit better with the first Insecticon?

Website · by **RK_Striker_JK_5** » Fri Sep 02, 2011 4:43 pm

El Duque wrote:
Down_Shift wrote:What other issues are people having with Thundershred? My arms are ridiculously loose, but no issues with the claws on my end. The legs also don't connect to the pegs in alt mode.

A lot people have had either the pegs break off the end of the claws where they insert into the gauntlets or had teh gauntlets stress and crack. Mine are super tight, but I've experienced no damage.

Same here. The new blades will be cool, but not necessarily needed.

News Credits: 6 · by **BeastProwl** » Fri Sep 02, 2011 5:08 pm

Why does everything Fan'sProject make turn to gold, and are worth it's weight in it?
LOL Kinda weird, but funny, my mom came in and looked at him and said,
"Okay, what's with bondage man?"
I laughed my ass off.

by **The Dude** » Fri Sep 02, 2011 9:33 pm

Hmmm... Stormbomb is looking better and better. However, NOT BUYING unless it's confirmed that these pegs are looser than the ones on Thundershred. I didn't buy Thundershred because of all this peg-breaking craziness, but I really want him.

News Credits: 187 · by **GetRightRobot** » Fri Sep 02, 2011 9:49 pm

This is starting to feel like a smear campaign. I have NEVER had a single problem with anything Fansproject has made, which includes, 3 City Commander upgrades (Nemesis, Magnus, DIA), Protector Upgrade, Sidearm, Blesser, Warbot Defender, CrossFire Munitioner, Explorer, Warcry, Flameblast, and Thundershred. I don't mean to sound all defensive, but this is the first I've heard of any QC issues from Fansproject. Perhaps I've been lucky, or that I am a little more careful when handling pricier figures, but that has been my experience.

News Credits: 1 · by **Kung Fu Man** » Fri Sep 02, 2011 10:25 pm

Regarding the topic subject...holy heck does that look awesome. The double chain flail adds a *lot* to this toy's look, and the overall design still keeps the "Bombshell" appearance.

I may get one of these next pay day.

News Credits: 5 · by **Doctor McGrath** » Fri Sep 02, 2011 11:40 pm

GetRightRobot wrote:This is starting to feel like a smear campaign. I have NEVER had a single problem with anything Fansproject has made, which includes, 3 City Commander upgrades (Nemesis, Magnus, DIA), Protector Upgrade, Sidearm, Blesser, Warbot Defender, CrossFire Munitioner, Explorer, Warcry, Flameblast, and Thundershred. I don't mean to sound all defensive, but this is the first I've heard of any QC issues from Fansproject. Perhaps I've been lucky, or that I am a little more careful when handling pricier figures, but that has been my experience.

This.

by **FullMetalGeth** » Sat Sep 03, 2011 6:24 am

amcgrath929 wrote:
GetRightRobot wrote:This is starting to feel like a smear campaign. I have NEVER had a single problem with anything Fansproject has made, which includes, 3 City Commander upgrades (Nemesis, Magnus, DIA), Protector Upgrade, Sidearm, Blesser, Warbot Defender, CrossFire Munitioner, Explorer, Warcry, Flameblast, and Thundershred. I don't mean to sound all defensive, but this is the first I've heard of any QC issues from Fansproject. Perhaps I've been lucky, or that I am a little more careful when handling pricier figures, but that has been my experience.

This.

This x2.

by **Rated X** » Sat Sep 03, 2011 9:15 am

My Shrapnel and Bombshell are still sitting in my pile of loot at BBTS. I want to get all 3 together. So I am not aware of any quality issues at this point. Common sense is not to force something in a hole. Exactly what "pegs" are the referring to on Shrapnel ??? Pegs on his body transformation or just on his weapons ??? If you have to sand it a little, so be it. I dont plan on giving my Shrapnel the "Freddy Kruger" look anyways. Ill probally put the claws on his back pointed upwards to give it the most G1 look possible. Thinking about using the ninja weapons for my Junkions since it makes more sense for G1's sake.

News Credits: 5749 · by **El Duque** » Sat Sep 03, 2011 10:33 am

More in-hand images here.

Can't wait for this guy to arrive, my POL is in "warehouse" purgatory at BBTS, which is starting to annoy me. When I first started using them my shipment would be out the door the same day I hit the ship button, now it's usually at least two days. Oh well, they still have outstanding customer service so I guess that makes up for it.