Seibertron.com Energon Pub Forums

ZeldaTheSwordsman wrote:I would like to see him updated with G1 aesthetic instead of Aligned, and with CW ports and TR and WFC base connectors, but I specifically mentioned T30 because that already exists and is what the pics from this reveal advertise Scamper as being able to connect to.

Yeah that's why I said it would be easy for Hasbro to rerelease that one. No extra engineering needed. And it would make massive profits for them.

Autobot N wrote:That sure looks like an Omega Sentinel to me

Yeah, it does on the left, middle and right are regular Omega Supreme. Also interesting that the file is dated as November, could be hearing something about that soon if it's happening.

I like the folder titled "TRA_ARMADASTA...OLD_V2" Which I assume means Armada Starscream mold version 2. I'm just surprised they internally refer to it that way.

Another folder is named "GENERATIONS - GATE D...ATE". Speculate away on that one.

OK, back to the actual news, does Slammer just sit there? There's only one useful peg hole where it's sitting and it doesn't really match up with anything on him.

Emerje

Rodimus Prime wrote:

ZeldaTheSwordsman wrote:T30 Metroplex reissue or riot.

Don't You mean "peacefully protest?"

Scamper looks great and that is an amazing feature (especially after the failure to do the same with SIEGE Brunt). However, this feature makes the need for another reissue of T30 Metroplex all the more urgent because with him costing what he does on eBay right now... most who don't already have him won't be able to take advantage of it - unless there's a reissue.

Yeah, reissuing Metroplex would be a good selling point for Scamper (not to mention Metroplex) and it wouldn't even require any new engineering. Personally I believe the figure needs an update though. Maybe in 2 years for its 10th anniversary?

Wow I only thought they were putting out Slammer right now, I hadn't heard about them releasing scamper on his own. That's pretty cool.

Rodimus Knight wrote:

Rodimus Prime wrote:

ZeldaTheSwordsman wrote:T30 Metroplex reissue or riot.

Don't You mean "peacefully protest?"

Scamper looks great and that is an amazing feature (especially after the failure to do the same with SIEGE Brunt). However, this feature makes the need for another reissue of T30 Metroplex all the more urgent because with him costing what he does on eBay right now... most who don't already have him won't be able to take advantage of it - unless there's a reissue.

Yeah, reissuing Metroplex would be a good selling point for Scamper (not to mention Metroplex) and it wouldn't even require any new engineering. Personally I believe the figure needs an update though. Maybe in 2 years for its 10th anniversary?

Wow I only thought they were putting out Slammer right now, I hadn't heard about them releasing scamper on his own. That's pretty cool.

Funny guy. But you're right, it was a screwup. Scamper is the little black car that came with Generations Metroplex, right? I wouldn't mind seeing him get a deluxe update.

Rodimus Prime wrote:

Rodimus Knight wrote:

Rodimus Prime wrote:

ZeldaTheSwordsman wrote:T30 Metroplex reissue or riot.

Don't You mean "peacefully protest?"

Scamper looks great and that is an amazing feature (especially after the failure to do the same with SIEGE Brunt). However, this feature makes the need for another reissue of T30 Metroplex all the more urgent because with him costing what he does on eBay right now... most who don't already have him won't be able to take advantage of it - unless there's a reissue.

Yeah, reissuing Metroplex would be a good selling point for Scamper (not to mention Metroplex) and it wouldn't even require any new engineering. Personally I believe the figure needs an update though. Maybe in 2 years for its 10th anniversary?

Wow I only thought they were putting out Slammer right now, I hadn't heard about them releasing scamper on his own. That's pretty cool.

Funny guy. But you're right, it was a screwup. Scamper is the little black car that came with Generations Metroplex, right? I wouldn't mind seeing him get a deluxe update.

Put a new head on Siege G2Covert Clone Sideswipe from the Amazon set and you have a reasonable deluxe Scamper.

It's funny to me to see Pipes in another "coming soon" type of promo when my Puffer and Road Rage Ranger arrived in the mail yesterday.

Glarryg

Glarryg wrote:It's funny to me to see Pipes in another "coming soon" type of promo when my Puffer and Road Rage Ranger arrived in the mail yesterday.

Glarryg

Getting my Pipes either today or tomorrow

Really loving Slammer's "chainsword" made out of the tank threads.

Not completely surprised, but within 3 days getting Rodimus from Amazon, the trailer has been sold...
All said and done, between the Amazon sale, then taxes, selling fees, etc., I ended up with Roddy, the matrix, rifle, and sword for $35.
I'm more than happy with this.

Meanwhile on Pulse: *crickets*

Rtron wrote:Really loving Slammer's "chainsword" made out of the tank threads.

I want to see them plugged directly into arms. Whether you're talking about Evil Dead, Sealab 2021, or Chainsaw Man, chainsaw hands are the dream.

Rodimus Prime wrote:

william-james88 wrote:please take pics next time, would love to see how fully stocked your shelves are.

Well it's really just leader class. Everything below that is crickets. A couple of SS deluxes, no more. But I'll take a few tomorrow. I'm going to start checking both stores regularly for Tigatron, since I was late for the preorders. If I see Blaster, he will be an in-hand decision.

Pick up Blaster even if you don't want it. I'm sure you'd be able to send it to a needy home.

I only want a T30 Metroplex reissue IF they fix the hips. If they're not going to do that then forget it. I am a bit disappointed that they made the effort for Slammer to combine with Metroplex, but not Sixgun from Siege.

I got Jackpot yesterday, the head is garbage, to be honest, I would've liked to have gotten the Puffer Night Ranger Road Ranger set.

Sowndwave76 wrote:Not completely surprised, but within 3 days getting Rodimus from Amazon, the trailer has been sold...
All said and done, between the Amazon sale, then taxes, selling fees, etc., I ended up with Roddy, the matrix, rifle, and sword for $35.
I'm more than happy with this.

I'm really happy this worked out for you.

Got a little DIY tip for Jackpot's wonky noggin.

I popped his head off, and since mine was not well-glued, I was able to pry apart the left and right halves with little trouble. (The gap in his chin is a great leverage point.) The sides of his head are held together by two pegs, the smaller of which is contributing to the misalignment. (His face is a very tiny piece of plastic slotted in between; gotta make sure you don't lose it when disassembled.) I snipped off the smaller peg and carefully trimmed less than a millimetre of plastic from the rear edge of the cup for his neck-ball to create the tiniest bit of wiggle-room for realigning the left and right sides. I was able to get the front of his helmet to line up a bit more evenly, and after carefully gluing everything back together, I also repainted the silver portions on his forehead. (Mine was a shade darker on one side than the other, making the unevenness even more obvious.) It's not a perfect fix. The asymmetry of the molds is still clear when viewing the back of his head, but the front doesn't look nearly as janky as when I first unpacked him.

I still don't get how Hasbro's QC could blow it this badly, but at least now I can look at Jackpot without feeling he was a wasted purchase.

william-james88 wrote:

Sowndwave76 wrote:Not completely surprised, but within 3 days getting Rodimus from Amazon, the trailer has been sold...
All said and done, between the Amazon sale, then taxes, selling fees, etc., I ended up with Roddy, the matrix, rifle, and sword for $35.
I'm more than happy with this.

I'm really happy this worked out for you.

Thanks, man!
I appreciate you!!!

Overcracker wrote:Well, they are a pretty cool duo.
Not $50 cool though.

And either I’m doing something wrong, or the clearance of the tires and the arm panels is nonexistent. The front tires scrape against the panels in truck mode, and Road Ranger’s chest seems to protrude a bit too low past the tires and hits the ground.

Never picked up Huffer, so don’t know if he had the same issues.

1AC1EC4B-F6C2-4118-A47B-59BD733DDF1A.jpeg

AFF2A3D4-B9CC-49DE-BDE7-7E07D7623B48.jpeg

174FAD37-229F-4BF4-A760-D986FB704F21.jpeg

I remember some people having an issue with huffer bowing in the middle causing not all the wheels to roll. Not sure if that's related to your issues, I never really noticed anything on my copy.

Overcracker wrote:Well, this just arrived:

A05FE518-84B1-43C9-9559-32F58C6B365E.jpeg

So they were captured by the decepticons and tied to the rails?

chuckdawg1999 wrote:

Overcracker wrote:Well, they are a pretty cool duo.
Not $50 cool though.

And either I’m doing something wrong, or the clearance of the tires and the arm panels is nonexistent. The front tires scrape against the panels in truck mode, and Road Ranger’s chest seems to protrude a bit too low past the tires and hits the ground.

Never picked up Huffer, so don’t know if he had the same issues.

1AC1EC4B-F6C2-4118-A47B-59BD733DDF1A.jpeg

AFF2A3D4-B9CC-49DE-BDE7-7E07D7623B48.jpeg

174FAD37-229F-4BF4-A760-D986FB704F21.jpeg

I remember some people having an issue with huffer bowing in the middle causing not all the wheels to roll. Not sure if that's related to your issues, I never really noticed anything on my copy.

The Huffer mold does have enough clearance when everything is tabbed in correctly. You are likely missing something in the transformation. The arms have to be lined up just right and tab in multiple places to the rest of the truck.

ShadowBlaze wrote:I still don't get how Hasbro's QC could blow it this badly, but at least now I can look at Jackpot without feeling he was a wasted purchase.

I'm pissed off enough about it that I e-mailed Hasbro customer service. This is their reply (get ready):

Response By Email (Rochonda) (12/06/2021 11:40 AM)
Hi Dan,

Thank you for reaching out regarding your recent purchase of the Transformers War of Cybertron Jackpot figure. We understand the figure may be slightly different from the packaging images, this does happen from time to time as the packing artwork may vary. We assure you that your Jackpot figure will function fully as intended.

If you have additional concerns, please contact Hasbro Consumer Care.

I hope you have a fun day!

Kind regards,

Rochonda
Global Consumer Care Representative

First, I can't believe Hasbro had the balls to reply with that, and second, I'm torn on whether to bother replying to it.

It is a poor response from a support perspective, but technically it is true, and legal, (The messed up mold head does not effect the toys functionality) which is all they care about. Unfortunately it needs to get to the ear of one of the actual designers, The best they could probably do is give you a full refund. There is no way to fix it, unless Hasbro were to spend thousands of dollars to recast the mold and send everyone who purchased a new head.

I finally got Kingdom Tigatron this past weekend! Quick question, but is the robot mode’s “loin cloth” articulation just a vestigial feature? It doesn’t seem to do anything for the conversion between modes.