Hasbro Transformers Combiner Wars Fan-Built Poll - Nemesis Revealed: Galvatronus

Makes sense, they've been using that image of Galvatronus in the bottom corner from the start.

Limbs don't appear to be important. Both arms are the same vague jet and the legs both appear to be Dragstrip.

Emerje

i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

yay,, more repaints.. exactly what this line needs.

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

TimothyR wrote:yay,, more repaints.. exactly what this line needs.

To be fair, there aren't that many repaints. Most stuff's been remolded as well as repainted. And it was clear this was going to be a recolor from the start.

If this messes up the comics, I'll be very upset.

TimothyR wrote:yay,, more repaints.. exactly what this line needs.

Yay, more whining, exactly what this forum needs.

Repaints have been a big part of Transformers since Day One. If you don't like them, find a new hobby.

Nemesis Maximo wrote:If this messes up the comics, I'll be very upset.

The comics are only written to promote the toys. They can re-write the fiction to accomodate the toys, just as they have since the first TF comics were written to promote a new line of toys consisting of a bunch of unrelated toys from different lines.

TimothyR wrote:yay,, more repaints.. exactly what this line needs.

I don't get these kinds of complaints. Over in the Protectobot thread, people come up with ideas for who Hot Spot could be redecoed into, and which limbs could be redecoed into which characters said Hot Spot redecos could combine with, and people are loving those ideas.

Yet, in this thread, an actual official combiner redeco is forthcoming, and the exact opposite reaction is given?

This fandom, I swear.

TimothyR wrote:yay,, more repaints.. exactly what this line needs.

I hope that was sincere...if it was, I agree.

If not...

The more repaints = the more combinations.

The more combinations = the more play value for kids.

More play value for kids = the more they want it = more sales.

For customizers it doesn't matter, they'll just paint or mod parts.

Good. My wallet needs a break.

Wake me up when Bruticus is released.....

Metroplex79 wrote:

TimothyR wrote:yay,, more repaints.. exactly what this line needs.

I hope that was sincere...if it was, I agree.

If not...

The more repaints = the more combinations.

The more combinations = the more play value for kids.

More play value for kids = the more they want it = more sales.

For customizers it doesn't matter, they'll just paint or mod parts.

You think children are buying these? At $17 a limb?

Last I checked children do not have jobs and parents generally do not shell out $125 a pop for combiners. Especially four in six months.

Good thing their parents have jobs.

So, Hasbro gave fans a fan built combiner. That could have been created without Hasbro's help?

Speculating all Hasbro is going to do is put everything in a gift set. Maybe give all of the toys a gloss shiny finish.

Thinking, Hasbro is probably going to recolor a few CW Aerialbots as Decepticon seekers. Then use a few Stunticons in different characters colors.

Can only assume the Galvatronus Nemesis characters is the one that fights the CW Optimus and his mixed CW limbs.

Burn wrote:

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

Also don't think the votes count.

Think Hasbro is well aware of some fans that will try their hardest to vote over One Thousand times in these Voting polls. Hasbro will not allow a few fans who vote Thousands of times to override fans who votes Once with these polls.

In the end, don't think any of these fan submitted votes get counted or acknowledged. Think Hasbro picks the winner well in advance.

Sabrblade wrote:

TimothyR wrote:yay,, more repaints.. exactly what this line needs.

I don't get these kinds of complaints. Over in the Protectobot thread, people come up with ideas for who Hot Spot could be redecoed into, and which limbs could be redecoed into which characters said Hot Spot redecos could combine with, and people are loving those ideas.

Yet, in this thread, an actual official combiner redeco is forthcoming, and the exact opposite reaction is given?

This fandom, I swear.

To be fair, for the money they are charging us for this stuff Hasbro has no real reason why they cannot provide a new mold for each figure other than the fact that they want to maximize their profits for their shareholders. It is the "old" saying, run your business by creating a product for the least amount of money and charge the most you can. The problem is that you eventually cross the line with quality. And the way some of this stuff is made anymore is kinda pathetic. I really like the detail they can get with laser cut molds, but everything else has gone to hell. I mean, you have unpainted parts on some of these figures, which is inexcusable for $16 a pop. A lot of the molds in G1 were original, or at least reduxed from Micromaster stuff, so really there is no reason why they do this other than to get at much money out of you as possible while spending the least amount to do so. The movie money created a monster with Hasbro, and now their investors expect the same dividends every single year. And this is why we get the price increases we get, especially in non-movie years.

Tsutsukakushi wrote:

Burn wrote:

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

Also don't think the votes count.

Think Hasbro is well aware of some fans that will try their hardest to vote over One Thousand times in these Voting polls. Hasbro will not allow a few fans who vote Thousands of times to override fans who votes Once with these polls.

In the end, don't think any of these fan submitted votes get counted or acknowledged. Think Hasbro picks the winner well in advance.

They get money by you loading that app on your phone by selling your data. Whether they actually count these votes is speculation, but it would not surprise me if it just a gimmick. In reality, picking one from three or four preset attributes is not really a good voting process. In my OP, they should have skipped this nonsense and just give us Bruticus or one of the season three G1 combiners, like Computron.

shockblast2 wrote:

Tsutsukakushi wrote:

Burn wrote:

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

Also don't think the votes count.

Think Hasbro is well aware of some fans that will try their hardest to vote over One Thousand times in these Voting polls. Hasbro will not allow a few fans who vote Thousands of times to override fans who votes Once with these polls.

In the end, don't think any of these fan submitted votes get counted or acknowledged. Think Hasbro picks the winner well in advance.

They get money by you loading that app on your phone by selling your data. Whether they actually count these votes is speculation, but it would not surprise me if it just a gimmick. In reality, picking one from three or four preset attributes is not really a good voting process. In my OP, they should have skipped this nonsense and just give us Bruticus or one of the season three G1 combiners, like Computron.

Both will happen, I'm sure. Personally, I will not rest untill I get my Seacons. In the meantime, let's just enjoy whatever is comning our way. I'm curious how Galvatronus Nemesis Aurora Borealis Maximus Trolleybus is going to turn out.

shajaki wrote:Good thing their parents have jobs.

Generally, parents with jobs have much more important things to spend their money on than toys for their children. And even when they do give them an allowance or by them something once a month or so when they go to TRU or a big box they do not want to commit 6-9 months worth of allowance for one toy with five parts they have to find at random.

I have four children and I take them to TRU once a month. I let them get something up to $15-20. None of my children have ever chosen a deluxe Generations Transformer, let alone something like this where they have to commit every single allowance to getting al five of a combiner. As a matter of fact only one of my sons ever picks Transformers, and that is usually a one step. Furthermore, if given a choice, would a 10 year old boy choose one combiner limb or two TMNT figures? One combiner limb or two Mario figures? One combiner limb or two Minecraft figures? One combiner limb, or four Lego Mixels? One combiner limb or five Disney Cars Diecasts? Hell, one combiner limb or one deluxe RID figure that is actually in a cartoon they watch?

RhA wrote:I'm curious how Galvatronus Nemesis Aurora Borealis Maximus Trolleybus is going to turn out.

shockblast2 wrote:

shajaki wrote:Good thing their parents have jobs.

Generally, parents with jobs have much more important things to spend their money on than toys for their children. And even when they do give them an allowance or by them something once a month or so when they go to TRU or a big box they do not want to commit 6-9 months worth of allowance for one toy with five parts they have to find at random.

I have four children and I take them to TRU once a month. I let them get something up to $15-20. None of my children have ever chosen a deluxe Generations Transformer, let alone something like this where they have to commit every single allowance to getting al five of a combiner. As a matter of fact only one of my sons ever picks Transformers, and that is usually a one step. Furthermore, if given a choice, would a 10 year old boy choose one combiner limb or two TMNT figures? One combiner limb or two Mario figures? One combiner limb or two Minecraft figures? One combiner limb, or four Lego Mixels? One combiner limb or five Disney Cars Diecasts? Hell, one combiner limb or one deluxe RID figure that is actually in a cartoon they watch?

So your kids have varied interests. That's cool. When I was a kid my interests were very linear. It was all about Transformers, and other toys were there but few and far between. I was into TMNT really hard, but that took place pretty much when TF's were on hiatus anyways.

And random was how it went. I had two complete Scramble City combiners, but neither was a complete team. It was a total mix of sub-teams and factions and I didn't care at all. That's what was one of the funnest things about the concept, and I bet there's kids out there who will have the same fun.

shockblast2 wrote:To be fair, for the money they are charging us for this stuff Hasbro has no real reason why they cannot provide a new mold for each figure other than the fact that they want to maximize their profits for their shareholders. It is the "old" saying, run your business by creating a product for the least amount of money and charge the most you can. The problem is that you eventually cross the line with quality. And the way some of this stuff is made anymore is kinda pathetic. I really like the detail they can get with laser cut molds, but everything else has gone to hell. I mean, you have unpainted parts on some of these figures, which is inexcusable for $16 a pop. A lot of the molds in G1 were original, or at least reduxed from Micromaster stuff, so really there is no reason why they do this other than to get at much money out of you as possible while spending the least amount to do so. The movie money created a monster with Hasbro, and now their investors expect the same dividends every single year. And this is why we get the price increases we get, especially in non-movie years.

Given the alternative nothing or something. I'd take something in the form of repurposed CW toys. If this is the only way to get all of the G1 Combiners, Then i'll take it.

Most of these CW repaints are extensive resculpts with newer parts. Most parents and kids who are the main targeted consumer for this. Won't be able to notice some are repurposed toys.

No, a lot of the Original G1 toys were repaints and retools.

The purpose of repaints and retools is to appeal to kids different toy buying reactions to colors or shapes that they like or hate more.

HasTak does not create repaints to be cruel to the fans who force themselves to buy everything.

Think, The Transformers toys prices increases are due to the rising cost of oil. not to make the stock holders or investors more rich.

DOTM and AOE toy sales were not as great as the 2007 Transformers movie and ROTF toy lines.

Transformers toys due to their complexity are the most complicated, expensive toys to create for kids. They take a long time to create. Repaints and retools are needed to help relieve the cost of making the initial toys.

shockblast2 wrote:

shajaki wrote:Good thing their parents have jobs.

Generally, parents with jobs have much more important things to spend their money on than toys for their children. And even when they do give them an allowance or by them something once a month or so when they go to TRU or a big box they do not want to commit 6-9 months worth of allowance for one toy with five parts they have to find at random.

I have four children and I take them to TRU once a month. I let them get something up to $15-20. None of my children have ever chosen a deluxe Generations Transformer, let alone something like this where they have to commit every single allowance to getting al five of a combiner. As a matter of fact only one of my sons ever picks Transformers, and that is usually a one step. Furthermore, if given a choice, would a 10 year old boy choose one combiner limb or two TMNT figures? One combiner limb or two Mario figures? One combiner limb or two Minecraft figures? One combiner limb, or four Lego Mixels? One combiner limb or five Disney Cars Diecasts? Hell, one combiner limb or one deluxe RID figure that is actually in a cartoon they watch?

Those original G1 combiners toys were great sellers for HasTak Three decades ago.

One of the many reasons Why HasTak decided to create the Combiners wars toys. Was due to how great the sales were for the FOC Combaticons and all of their repurposed toys.

Looking at the current Combiners Wars toy sales. They appear to be selling great for HasTak. As stores and online sites keep selling out of the toys.

The fact that fans keep seeing Rid2015 toys heavily stocked in stores. And have hard times finding any Combiners Wars toys in stores. Should be a indication that these CW toys are in demand and selling out everywhere.

This is all very well and good but WHERE ARE THE SEACONS

Tsutsukakushi wrote:

shockblast2 wrote:

shajaki wrote:Good thing their parents have jobs.

Generally, parents with jobs have much more important things to spend their money on than toys for their children. And even when they do give them an allowance or by them something once a month or so when they go to TRU or a big box they do not want to commit 6-9 months worth of allowance for one toy with five parts they have to find at random.

I have four children and I take them to TRU once a month. I let them get something up to $15-20. None of my children have ever chosen a deluxe Generations Transformer, let alone something like this where they have to commit every single allowance to getting al five of a combiner. As a matter of fact only one of my sons ever picks Transformers, and that is usually a one step. Furthermore, if given a choice, would a 10 year old boy choose one combiner limb or two TMNT figures? One combiner limb or two Mario figures? One combiner limb or two Minecraft figures? One combiner limb, or four Lego Mixels? One combiner limb or five Disney Cars Diecasts? Hell, one combiner limb or one deluxe RID figure that is actually in a cartoon they watch?

Those original G1 combiners toys were great sellers for HasTak Three decades ago.

One of the many reasons Why HasTak decided to create the Combiners wars toys. Was due to how great the sales were for the FOC Combaticons and all of their repurposed toys.

Looking at the current Combiners Wars toy sales. They appear to be selling great for HasTak. As stores and online sites keep selling out of the toys.

The fact that fans keep seeing Rid2015 toys heavily stocked in stores. And have hard times finding any Combiners Wars toys in stores. Should be a indication that these CW toys are in demand and selling out everywhere.

Online sites are selling out because the brick and mortar stores are barely carrying the product. You also have a lot of fanboys that want the very limited stock they do have. HTS and BBTS cannot nor will they ever hold the volume that the big box stores can.

As far as my local big box stores they are shelf warming wave one right now. Why? Because online retailers have had them for months.

Looking at combiner wars sales? You don't know what they have sold, unless you work in the accounting dept at Hasbro. This information is closely guarded until they release their earnings statements, so you are pulling your OPINION based on sales on online retailers. Which is highly inaccurate, because you have no clue how many unites they had in stock before they sold out.

Total sales is also not a good indicator of a lines success. Units sold is way more important. Let alone the cost of goods sold.

The RID are heavily stocked in stores because the big box stores want a toy driven by a cartoon. It is a fact that this boosts sales. Generations has nothing driving it save the comics. And the fanboys are keeping that line alive.....for now. I can guarantee you that they have sold way more RID figures than Combiner Wars. And they will continue to do so.

Delta Magnus wrote:This is all very well and good but WHERE ARE THE SEACONS

I would take the Seacons over this "fan created" combiner for sure. Sadly, we will probably see them passed over for this junk.

On actual serious matters:

It should be called Steve.

In honour of the Greatest Decepticon of All Time.

Tsutsukakushi wrote:

shockblast2 wrote:To be fair, for the money they are charging us for this stuff Hasbro has no real reason why they cannot provide a new mold for each figure other than the fact that they want to maximize their profits for their shareholders. It is the "old" saying, run your business by creating a product for the least amount of money and charge the most you can. The problem is that you eventually cross the line with quality. And the way some of this stuff is made anymore is kinda pathetic. I really like the detail they can get with laser cut molds, but everything else has gone to hell. I mean, you have unpainted parts on some of these figures, which is inexcusable for $16 a pop. A lot of the molds in G1 were original, or at least reduxed from Micromaster stuff, so really there is no reason why they do this other than to get at much money out of you as possible while spending the least amount to do so. The movie money created a monster with Hasbro, and now their investors expect the same dividends every single year. And this is why we get the price increases we get, especially in non-movie years.

Given the alternative nothing or something. I'd take something in the form of repurposed CW toys. If this is the only way to get all of the G1 Combiners, Then i'll take it.

Most of these CW repaints are extensive resculpts with newer parts. Most parents and kids who are the main targeted consumer for this. Won't be able to notice some are repurposed toys.

No, a lot of the Original G1 toys were repaints and retools.

The purpose of repaints and retools is to appeal to kids different toy buying reactions to colors or shapes that they like or hate more.

HasTak does not create repaints to be cruel to the fans who force themselves to buy everything.

Think, The Transformers toys prices increases are due to the rising cost of oil. not to make the stock holders or investors more rich.

DOTM and AOE toy sales were not as great as the 2007 Transformers movie and ROTF toy lines.

Transformers toys due to their complexity are the most complicated, expensive toys to create for kids. They take a long time to create. Repaints and retools are needed to help relieve the cost of making the initial toys.

I am an accountant for a major plastic injection manufacturer in the US and I can tell you first hand that resin is NOT the driving force for these price increases. Resin was higher five years ago than it is today.

Lol...Hasbro is in business in GENERAL to make investors and stock holders more rich. Just who do you think is holding most of the stock?? Ever worked for a company with stock options for upper management?

You think this is the most expensive toy to produce? Do you know anything about Chinese manufacturing and the cost of doing business over there? $5 a unit from start to finish TOPS. The rest is profit. Look at Hasbro's financials. They are selling less units today than they did five years ago. Why did they make good profits last year? The movie and price increases.

No movie this year, and we are hit with a $2 price increase. To make up for others who jumped ship due to quality and cost.

Va'al wrote:On actual serious matters:

It should be called Steve.

In honour of the Greatest Decepticon of All Time.

Hey Va'al

Did you see the pic someone posted on here a few days ago with Metroplex attempting to flush AB down the toilet with the caption "yeah, flush that turd"?

I laughed my @ss off for over two minutes over that one.

Because I thought of you and what your face looked like when you saw it. So, I gotta know. What did you think?

What brought up the sudden over reaction? They showed us a drawing of Galvatronus, a figure we've already seen in hand, and that's somehow proof that the Fan Built Combiner is going to be nothing but repaints? It's nothing but baseless Hasbro bashing. We've seen how far Hasbro will go with remolds, leaving nothing but a very minimum core of upper arms, torso, and upper legs behind. That's OK for the Protectobots but not here? I know we're talking about toys here, but please try to act like rational adults.

shajaki wrote:And random was how it went. I had two complete Scramble City combiners, but neither was a complete team. It was a total mix of sub-teams and factions and I didn't care at all. That's what was one of the funnest things about the concept, and I bet there's kids out there who will have the same fun.

I think this is how a lot of kids felt then and now. I know when I was a kid I didn't have a single complete set even though I easily could have. I chose a couple cool ones and mixed them. I'm sure kids are doing the exact same thing when picking out Combiner Wars figures.

Emerje

ALPHA OMEGA vs STEVE MAXIMUS

That is all from me, good night.


[shockblast2: I didn't really react, actually. Should I?]

Emerje wrote:What brought up the sudden over reaction? They showed us a drawing of Galvatronus, a figure we've already seen in hand, and that's somehow proof that the Fan Built Combiner is going to be nothing but repaints? It's nothing but baseless Hasbro bashing. We've seen how far Hasbro will go with remolds, leaving nothing but a very minimum core of upper arms, torso, and upper legs behind. That's OK for the Protectobots but not here? I know we're talking about toys here, but please try to act like rational adults.

shajaki wrote:And random was how it went. I had two complete Scramble City combiners, but neither was a complete team. It was a total mix of sub-teams and factions and I didn't care at all. That's what was one of the funnest things about the concept, and I bet there's kids out there who will have the same fun.

I think this is how a lot of kids felt then and now. I know when I was a kid I didn't have a single complete set even though I easily could have. I chose a couple cool ones and mixed them. I'm sure kids are doing the exact same thing when picking out Combiner Wars figures.

Emerje

The odds are very high that these will be retools. Not that this is a turnoff for me or anything, as long as they mix it up and use some decepticon molds as autobots and vice versa.

Va'al wrote:ALPHA OMEGA vs STEVE MAXIMUS

That is all from me, good night.


[shockblast2: I didn't really react, actually. Should I?]

Well, yes. I thought you were AB's biggest fan?? I figured you would have said SOMETHING. Not malicious, but the proverbial middle finger of some sort at least.

My question was what was your first reaction when you saw it? Did you laugh? Get pissed? What?

shockblast2 wrote:

Va'al wrote:ALPHA OMEGA vs STEVE MAXIMUS

That is all from me, good night.


[shockblast2: I didn't really react, actually. Should I?]

Well, yes. I thought you were AB's biggest fan?? I figured you would have said SOMETHING. Not malicious, but the proverbial middle finger of some sort at least.

My question was what was your first reaction when you saw it? Did you laugh? Get pissed? What?

Shrugged. Laters gonna late.

Nemesis Maximo wrote:If this messes up the comics, I'll be very upset.

I hope not, please keep all of this out of the comics!

Yeah because the last fan built character wasn't in the comics.

Delta Magnus wrote:This is all very well and good but WHERE ARE THE SEACONS

HasTak said the Combiners Wars toy line is a Two maybe Three years toy line. Guessing the CW Seacons are coming last.

Thinking if HasTak does CW Abonimus, Predaking and Seacons. That some of these toys CW Beast bots will be reurposed back and forth.

Edit and forget it.

Va'al wrote:On actual serious matters:

It should be called Steve.

In honour of the Greatest Decepticon of All Time.

So you don't have an actual serious matter to address?

Burn wrote:

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

Yeah don't blame the fans



Blame the kids and other people who are voting.






So sick of people saying that the voting is rigged what does Hasbro get out of that?




Not to mention it would be wasting the time and money that people would have put towards the promotions and the app and the voting thing itself.

Dagon wrote:

So you don't have an actual serious matter to address?

Not sure if you've been outside but this planet is horrible when its serious.



So does the fandom.

mirageandjazz1197 wrote:

Dagon wrote:

So you don't have an actual serious matter to address?

Not sure if you've been outside but this planet is horrible when its serious.



So does the fandom.

That's cute.

Dagon wrote:

Va'al wrote:On actual serious matters:

It should be called Steve.

In honour of the Greatest Decepticon of All Time.

So you don't have an actual serious matter to address?

I am dead serious.

This is the internet, after all.

mirageandjazz1197 wrote:

Burn wrote:

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

Yeah don't blame the fans

Blame the kids and other people who are voting.

So sick of people saying that the voting is rigged what does Hasbro get out of that?

Not to mention it would be wasting the time and money that people would have put towards the promotions and the app and the voting thing itself.

What does Hasbro get out of it? It generates interest in their product. It lets people feel like they have a say. It lets people feel good about themselves.

It's win-win for Hasbro.

Though that would give the designers more work to do then just letting the public do their work for them which probably would be the most cost effective option. I mean If it were revealed that hasbro had ignored votes then surely they would be liable.

Burn wrote:

mirageandjazz1197 wrote:

Burn wrote:

Doubledealer93 wrote:i swear i dont trust fans to vote decepticon on these polls. The decepticons always get the short end of the stick.

Don't blame the fans, it's not like the votes actually count.

Yeah don't blame the fans

Blame the kids and other people who are voting.

So sick of people saying that the voting is rigged what does Hasbro get out of that?

Not to mention it would be wasting the time and money that people would have put towards the promotions and the app and the voting thing itself.

What does Hasbro get out of it? It generates interest in their product. It lets people feel like they have a say. It lets people feel good about themselves.

It's win-win for Hasbro.

What makes you so sure the voting is rigged?

Burn wrote:

What does Hasbro get out of it? It generates interest in their product. It lets people feel like they have a say. It lets people feel good about themselves.

It's win-win for Hasbro.

That's a load bull Hasbro might have done questionable things in the past but I'm pretty sure that Hasbro is not stupid enough to pull a move like that.




Where's your proof it's rigged anyways?



We get a choice to vote for the choices/options that Hasbro gave us to make a new figure.

Limited outcomes isn't the same as outright rigging it.

mirageandjazz1197 wrote:

Burn wrote:
What does Hasbro get out of it? It generates interest in their product. It lets people feel like they have a say. It lets people feel good about themselves.

It's win-win for Hasbro.

That's a load bull Hasbro might have done questionable things in the past but I'm pretty sure that Hasbro is not stupid enough to pull a move like that.

Where's your proof it's rigged anyways?

We get a choice to vote for the choices/options that Hasbro gave us to make a new figure.

Going to have to agree with Burn here.

Think this is all just a fun activity. For fans to have fun and make them feel they are special and contributing to the brand.

It is not hard to rig votes or pretend to count them. especially when no government or state agency is assigned to count them or monitor it.

Don't think Hasbro will ever put the voting in fans hands. When they know their are some fans out their that abuse the voting system. By over voting hundreds or Thousands of times. In desperate attempts to get what they want and override other fans votes.

Think the reason why this latest voting polls was limited to just downloadable apps. Think it was due to Hasbro knowing about certain fans abusing the voting system by over voting hundreds or thousands of times.

mirageandjazz1197 wrote:

Burn wrote:
What does Hasbro get out of it? It generates interest in their product. It lets people feel like they have a say. It lets people feel good about themselves.

It's win-win for Hasbro.

That's a load bull Hasbro might have done questionable things in the past but I'm pretty sure that Hasbro is not stupid enough to pull a move like that.

Where's your proof it's rigged anyways?

We get a choice to vote for the choices/options that Hasbro gave us to make a new figure.

Going to have to agree with Burn here.

Think this is all just a fun activity. For fans to have fun and make them feel they are special and contributing to the brand.

It is not hard to rig votes or pretend to count them. especially when no government or state agency is assigned to count them or monitor it.

Don't think Hasbro will ever put the voting polls in fans hands. When they know their are some fans out their that abuse the voting system. By over voting hundreds or Thousands of times. In desperate attempts to get what they want and override other fans votes.

Yes that's true but they leave themselves open for people to call them out on it. All it would take is one designer to say "oh the fan built thing? Yeah we designed that years ago" then they land themselves in extremely hot water.

On the whole, I'm just going to call it a duck and be done with it, the simplest solution is often the right one. That being fans voted.