Kingdom Leader Class T-Wrecks Listed on Target's Website
Tuesday, June 15th, 2021 12:40PM CDT
Categories: Toy News, Collectables, Store NewsPosted by: Bounti76 Views: 91,273
Topic Options: View Discussion · Sign in or Join to reply
This page may contain affiliate links. We may earn commissions when readers interact with or purchase items through these links. For more information, see our affiliate disclosures here.
Thanks to Seibertronians D-Maximal_Primal and aronjlove, we have word that T-Wrecks, the Maximal repaint of Beast Megatron, is finally showing up on Target's website! While we've known he's coming for some time, he still hasn't been officially revealed by Hasbro. Perhaps an official reveal is just around the corner? The listing currently shows the big bot as "Coming Soon", though a little more digging into the listing reveals that RedCard holders get early access to preorder through 24 July, and that all guests (not just RedCard holders) will be able to order him on July 25th.
That's great news, considering a previous figure, Red Wing, could only be ordered via RedCard access and was never available to order by non-RedCard holders (except for a brief glitch that allowed anyone to order him).
Are you planning to pick T-Wrecks up when he's available to you? Is he just not your thing? Let us know in the comments below, and chick on any of the photos in this article to be taken to the listing.
News Search
Got Transformers News? Let us know here!
Most Popular Transformers News
Most Recent Transformers News
Posted by o.supreme on June 15th, 2021 @ 12:59pm CDT
Jelze Bunnycat wrote:
Odd... Let's do a little head count:
Siege
Cog/Aragon
Sixgun/Cromar
Brunt/Zetar/Centurian Drone
Earthrise
Ironworks/Greasepit/ Botropolis Ironworks
Airwave/Hot House/Overair
Fasttrack/Black Roritchi (or "Lorricci". Could be Italian...)
Kingdom
Paleotrex/Transmutate/Skelivore
Ractonite/Tricranius
Wingfinger
3 Weaponizer-type molds in each line... I'm very skeptical about a fourth. Then there's the fact a Brunt redeco as Metrotank, originally a redeco of Slammer, appeared in one of the mangas, so grasping at straws if anything else.
*updated for ya
Posted by Bounti76 on June 15th, 2021 @ 1:14pm CDT
Posted by TF-fan kev777 on June 15th, 2021 @ 1:22pm CDT
The listing currently shows the big bot as "Coming Soon", though a little more digging into the listing reveals that RedCard holders get early access to preorder through 24 July, and that all guests (not just RedCard holders) will be able to order him on July 25th
So has anyone with a Redcard actually been able to figure out how to order? I have one, but can't seem to find a way to pre-order.
Posted by Autobot N on June 15th, 2021 @ 1:27pm CDT
I dunno, the leaks were pretty specific. The guy in question leaked Slammer before the Walmart listing (I think he got to look at the instructions), and specifically called out his status as a Weaponizer and the fact that he had some sort of cool chainsaw/shield weapon. In particular:Bounti76 wrote:I think it's more likely that Slammer will be a redeco of Warpath, probably with a new head. Treds is the only other easy use of the mold that I can think of, but he's likely to be a Selects figure, if at all.
Re - Slammer: I thought the same [reference to him potentially being a Warpath retool] til I saw his engineering prototype pics, he looks very different almost more like airwave.
I'm picking him up for his cool chainsaw tank tread shield weapon alone.
Slammer:
Not super interested in this one, but he looks much more accurate than I expected. Appears to be almost completely a new mold. No obvious signs of shared engineering with Warpath, apart from the fact they both have treads and are tanks.
Neither did any of the Weaponizers/Modulators except for SixgunBounti76 wrote:The only thing G1 Slammer ever transformed into besides its tank mode was a tower in Metroplex's city mode, so he doesn't really have any history as a Weaponizer style figure
Posted by FenneD on June 15th, 2021 @ 1:31pm CDT
https://uk.hasbropulse.com/products/tra ... Y29tIn0%3D
Posted by Bounti76 on June 15th, 2021 @ 1:57pm CDT
TF-fan kev777 wrote:The listing currently shows the big bot as "Coming Soon", though a little more digging into the listing reveals that RedCard holders get early access to preorder through 24 July, and that all guests (not just RedCard holders) will be able to order him on July 25th
So has anyone with a Redcard actually been able to figure out how to order? I have one, but can't seem to find a way to pre-order.
I have a RedCard, but he's not available for me to pre-order, even when I'm logged in. I think it's just a case of the listing being put up, but not yet active.
Posted by TF-fan kev777 on June 15th, 2021 @ 2:01pm CDT
Bounti76 wrote:TF-fan kev777 wrote:The listing currently shows the big bot as "Coming Soon", though a little more digging into the listing reveals that RedCard holders get early access to preorder through 24 July, and that all guests (not just RedCard holders) will be able to order him on July 25th
So has anyone with a Redcard actually been able to figure out how to order? I have one, but can't seem to find a way to pre-order.
I have a RedCard, but he's not available for me to pre-order, even when I'm logged in. I think it's just a case of the listing being put up, but not yet active.
Thanks, That is what I assumed as well.
Posted by o.supreme on June 15th, 2021 @ 2:55pm CDT
FenneD wrote:This has been officially announced by Hasbro Pulse UK! Got an email about it an hour ago!
https://uk.hasbropulse.com/products/tra ... Y29tIn0%3D
Understandable as there is no Target in the UK. This is Good News for everyone there. Hopefully Pulse U.S. will follow suit under their "partners" arrangement where they have offered limited amounts of retailers exclusives previously to make them a little easier to obtain.
Posted by Bounti76 on June 15th, 2021 @ 3:01pm CDT
This is good news for U.K. residents, as they now have access to this anticipated figure. Click on any picture above to be taken to his U.K. listing! He's due to be dispatched on September 1st this year, so just near the end of the summer. Good luck, U.K. fans!
Posted by william-james88 on June 15th, 2021 @ 3:20pm CDT
Autobot N wrote:For me, it's Blaster, Slammer, and Pipes, in that orderwilliam-james88 wrote:Of the toys yet to be shown for Kingdom, which are you most excited to see? For me, it's Tigatron, really curious to see how he turned out.
Man, sometimes I lose sight of things, how is Blaster coming within the kingdom line?
Posted by Autobot N on June 15th, 2021 @ 3:38pm CDT
There were some leaked listings a month or so ago with a Kingdom Voyager Blaster. A couple of leakers said afterwards that some of the next trilogy's figures were being shuffled into a Kingdom Wave 5 a la Siege and Earthrise, but I don't remember if there were any others besides Blaster.william-james88 wrote:Autobot N wrote:For me, it's Blaster, Slammer, and Pipes, in that orderwilliam-james88 wrote:Of the toys yet to be shown for Kingdom, which are you most excited to see? For me, it's Tigatron, really curious to see how he turned out.
Man, sometimes I lose sight of things, how is Blaster coming within the kingdom line?
Posted by DeathReviews on June 15th, 2021 @ 4:07pm CDT
Posted by o.supreme on June 15th, 2021 @ 4:15pm CDT
DeathReviews wrote:Not sure I understand the appeal for this one.
basically those who remember the toy from 2000, as he was portrayed in fiction as the leader of the Beast Machines Maximal/Dinobots Sub-Group
https://tfwiki.net/wiki/Dinobot_(BM)
Oddly enough, I recall that Magmatron was an exclusive to Target at that time, but I think the original T-Wrecks was regular retail correct? - He was the only one I never wanted. I wanted all the others because it was a less expensive way to get several of the BW Neo Destrons' (albeit colored different)
Posted by Sabrblade on June 15th, 2021 @ 4:46pm CDT
There is no head retooling. There was supposed to be, but Hasbro goofed and used the same head as Megatron instead of the new one they made for T-Wrecks. As such, this is a straight redeco.DeathReviews wrote:Not sure I understand the appeal for this one. Different colors and a slight head remolding hardly seems to make this figure worth all the anticipation. Sure we all love tyrannosaurs, but they're treating T-Wrecks with as much buzz as if they were making the Centurion Drone accessories pack available again.....
As for why all the fuss, T-Wrecks is the redeco of the original BW Megatron toy. It was made back in 2000, so as soon as the new Kingdom Megatron was announced, people were expecting the inevitable T-Wrecks redeco.
Posted by Nemesis Primal on June 15th, 2021 @ 9:20pm CDT
I believe he also mentioned Slammer's tank cannon being able to be arm-mounted in robot mode like a Megatron fusion cannon, which would be absolutely impossible for the Warpath mold.Autobot N wrote:I dunno, the leaks were pretty specific. The guy in question leaked Slammer before the Walmart listing (I think he got to look at the instructions), and specifically called out his status as a Weaponizer and the fact that he had some sort of cool chainsaw/shield weapon. In particular:Bounti76 wrote:I think it's more likely that Slammer will be a redeco of Warpath, probably with a new head. Treds is the only other easy use of the mold that I can think of, but he's likely to be a Selects figure, if at all.Re - Slammer: I thought the same [reference to him potentially being a Warpath retool] til I saw his engineering prototype pics, he looks very different almost more like airwave.
I'm picking him up for his cool chainsaw tank tread shield weapon alone.Slammer:
Not super interested in this one, but he looks much more accurate than I expected. Appears to be almost completely a new mold. No obvious signs of shared engineering with Warpath, apart from the fact they both have treads and are tanks.
Posted by Triggerdick Megatron on June 16th, 2021 @ 1:57am CDT
o.supreme wrote:blackeyedprime wrote:Tigatron might have made it, if Cheetor was any good.
Surprisingly, Tigatron is a Voyager instead of a Deluxe, so it will be a new mold, not a remold of Cheetor.
Oh that sounds good....
I wish Kingdom Scorponok was a voyager, that size suits him.
Posted by Jelze Bunnycat on June 16th, 2021 @ 11:36am CDT
o.supreme wrote:DeathReviews wrote:Not sure I understand the appeal for this one.
basically those who remember the toy from 2000, as he was portrayed in fiction as the leader of the Beast Machines Maximal/Dinobots Sub-Group
https://tfwiki.net/wiki/Dinobot_(BM)
Oddly enough, I recall that Magmatron was an exclusive to Target at that time, but I think the original T-Wrecks was regular retail correct? - He was the only one I never wanted. I wanted all the others because it was a less expensive way to get several of the BW Neo Destrons' (albeit colored different)
T-Wrecks was regular retail, yes. The BM Dinobots were shipped mixed with the regular BM figures; T-Wrecks' case mate was Ultra Jetstorm.
:EDIT: Weird, I found a little... quirk with Paleotrex, specifically the Dino feet: they were misassembled on mine. Kinda hard to tell, but the detailing didn't really match up with what's on the Instructions (the part glossary for the Weapon Modes), turns out the shins were switched going by the curvature of the knees.
Posted by Sentinel_Primal on June 16th, 2021 @ 10:32pm CDT
Posted by william-james88 on June 16th, 2021 @ 11:41pm CDT
Posted by TF-fan kev777 on June 17th, 2021 @ 7:18am CDT
william-james88 wrote:Man, so glad I chose to skip this Rhinox and just stick to my T30 one
I'm the opposite, I can't wait to find this one. My T-30 Rhinox is a floppy mess that can only stand up in the most basic of poses.
Posted by Immortal Starscream on June 17th, 2021 @ 8:20am CDT
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Posted by aronjlove on June 17th, 2021 @ 12:17pm CDT
So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Posted by sol magnus on June 17th, 2021 @ 12:19pm CDT
aronjlove wrote:So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
IF they even fix it.
Posted by aronjlove on June 17th, 2021 @ 12:37pm CDT
sol magnus wrote:aronjlove wrote:So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
IF they even fix it.
Yeah, I'll just sit on the figure for a bit and see what I can find locally. One Target yesterday had tons of Rhinox and Cyclonus so they put out voyagers but the deluxe and leaders were older stuff, going to check the other major Target near me after work. I've seen reports of fixed variants being found in the wild so something must have been done.
Posted by Immortal Starscream on June 17th, 2021 @ 12:53pm CDT
aronjlove wrote:sol magnus wrote:aronjlove wrote:So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
IF they even fix it.
Yeah, I'll just sit on the figure for a bit and see what I can find locally. One Target yesterday had tons of Rhinox and Cyclonus so they put out voyagers but the deluxe and leaders were older stuff, going to check the other major Target near me after work. I've seen reports of fixed variants being found in the wild so something must have been done.
I have seen reports of people finding fixed shoulders in the wild. however these could be factory "mistakes" were the mistake is accidentally the correct version!
I will say I do advise SERIOUS caution if you are thinking about doing the fix, because breakage is highly likely. Japanese toy reviewer Wotafa did a livestream where he does the fix. It is easy to see how to do it even though it is in Japanese.
honestly though if you freak out at the sight of toys getting treated dangerously, look away!
https://youtu.be/qbjSCHHTGl4
Posted by aronjlove on June 17th, 2021 @ 3:11pm CDT
Posted by sol magnus on June 17th, 2021 @ 3:16pm CDT
aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
Posted by TF-fan kev777 on June 17th, 2021 @ 4:30pm CDT
sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
Posted by sol magnus on June 17th, 2021 @ 4:50pm CDT
TF-fan kev777 wrote:sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
Posted by aronjlove on June 17th, 2021 @ 4:59pm CDT
I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.sol magnus wrote:TF-fan kev777 wrote:sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
Posted by Hellscream9999 on June 17th, 2021 @ 5:52pm CDT
Immortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Question, does the "broken" shoulder configuration affect the range of movement if you simply orient them so the pin head faces towards you?
Posted by TF-fan kev777 on June 17th, 2021 @ 5:53pm CDT
aronjlove wrote:I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.
I'm right there with you.
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me!
Posted by aronjlove on June 17th, 2021 @ 6:14pm CDT
Hellscream9999 wrote:Immortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Question, does the "broken" shoulder configuration affect the range of movement if you simply orient them so the pin head faces towards you?
Absolutely not from what I can tell. I don't see any range of movement impeded. I just finished one arm and they can both move the same. Actually, if you don't do the 'fix', Galvatron has a higher reach. If your Galvatron plays basketball, you want the factory defect
TF-fan kev777 wrote:aronjlove wrote:I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.
I'm right there with you.
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me!
Lol, exactly!
Posted by chuckdawg1999 on June 17th, 2021 @ 6:15pm CDT
Posted by -Kanrabat- on June 17th, 2021 @ 6:32pm CDT
Maybe the issue will be fixed?
Posted by aronjlove on June 17th, 2021 @ 6:38pm CDT
chuckdawg1999 wrote:Is there any way to fix the arms on Galvatron just by rotating the joint around and swiveling the bicep? Do the "unfixed" arms affect transformation?
I haven't even transformed him yet but since all we are doing is flipping that shoulder piece, you can do exactly what you say but then the pin-hole shows. So it depends on how much that will bother you. Someone is gonna make an add-on that is nothing but covers for those pin-holes, they gonna make a lotta money.
Posted by sol magnus on June 17th, 2021 @ 7:29pm CDT
aronjlove wrote:I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.sol magnus wrote:TF-fan kev777 wrote:sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
One misaligned is worse than both misaligned. It looks...bad.
Posted by aronjlove on June 17th, 2021 @ 8:00pm CDT
Posted by TF-fan kev777 on June 17th, 2021 @ 9:48pm CDT
In any case, I snagged a Rhinox and Galvatron that my wife will have my kids wrap for me for Sunday, so they can mock and torture me for a couple days before I can enjoy them.
I'm leaning towards doing the shoulder fix. Has anyone who has done it replaced the pins with screws? And if so, what size screws did you use?
Posted by Bounti76 on June 17th, 2021 @ 11:59pm CDT
From this picture, we can see that Red Alert will be based on the upcoming Amazon exclusive earth-mode Sideswipe. Like his regular mold mate, Red Alert will also be a store exclusive, to the Walgreens drugstore chain, at least in the U.S., like Siege Ratchet and Earthrise Bluestreak. It remains to be seen how his distribution outside the U.S. will he handled.
What do you think of this reveal? Excited to add another LamBro to your collection? Let us know your thoughts, and stay tuned to Seibertron for all the latest Transformers news!
Posted by Rodimus Prime on June 18th, 2021 @ 12:50am CDT
Posted by Sentinel_Primal on June 18th, 2021 @ 1:47am CDT
Posted by Gauntlet101010 on June 18th, 2021 @ 7:33am CDT
I don't know why I like Universe RA less than his mold mates. I have a replacement head for him so it's not that. Hopefully this is easy to get.
Posted by sol magnus on June 18th, 2021 @ 9:01am CDT
Posted by M. Spector on June 18th, 2021 @ 9:21am CDT
And as a side note, pretty much all of the walgreens exclusives have shown up here in the far north, the only one that hasn't isnt even a TF but a Silver Surfer Marvel Legends figure from a year or so ago
Posted by Wolfman Jake on June 18th, 2021 @ 9:27am CDT
I think Hasbro and Takara must have used the original MP-14 release of Red Alert, not the “anime colors” MP-14+ version, as their color guide for the Kingdom figure.
Posted by o.supreme on June 18th, 2021 @ 9:40am CDT
Posted by LunarBolt1984 on June 18th, 2021 @ 10:27am CDT
On another note, i never got SEIGE Red Alert, or Netflix Red Alert, so I'm gonna try and pick up this guy, even if I passed up on Inferno (already had Grapple). I was perfectly fine with the SEIGE Lambo mold, which is why I have both Sideswipe and Deep Cover, but I'll bite on this one if it becomes available here in Canada. Earth-mode is a decent enough slight retool to not make me think its HasTak laziness, so Red Alert will look fine with my other two Lambros.
Posted by Autobot_Benz on June 18th, 2021 @ 10:52am CDT
https://www.youtube.com/watch?v=z4hr8r6Nivk
I am sticking with my Thrilling 30's one
Posted by Sculyblast on June 18th, 2021 @ 11:47am CDT
I've always wanted a hippo brother for rhinox.