Possible First Look at Transformers Kingdom Puffer and Unicron Galvatron

By the way this proves that the nemeses ships that come with Galvatron are not actually in scale with Unicron

They should of given us enough micro figures to fill up the spots in the Titan Ark , not just the Optimus Prime.

I count 14 Micro figures

1.Grimlock
2.Slag
3.Snarl
4.Swoop
5.Arcee
6.Kup
7.Ultra Magnus
8.Springer
9.Cyclonus
10.Scourge
11.Hot Rod
12.Perceptor
13.A Seeker Maybe (Starscream) ??
14??

Odd that Sludge was left out, unless he is in Robot Mode for some reason.

o.supreme wrote:I count 14 Micro figures

1.Grimlock
2.Slag
3.Snarl
4.Swoop
5.Arcee
6.Kup
7.Ultra Magnus
8.Springer
9.Cyclonus
10.Scourge
11.Hot Rod
12.Perceptor
13.A Seeker Maybe (Starscream) ??
14??

Odd that Sludge was left out, unless he is in Robot Mode for some reason.

And Megatron on the right, his canon stands out.

Nemesis Primal wrote:

TF-fan kev777 wrote:I think it is the Pipes head. The almost all white coloring and lighting from the photo washes out the shadows you see on the Pipes version's mouthplate from those photos. The ovreall shape is the same and the forehead details also appear to be the same.

Okay it's not just me then, I'm pretty sure it's the same head too but 98% of the TFW comments are people going "THE NOSE IS GONE, NEW HEAD" and I don't get it.

I'm not convinced they're the same. It's not just the nose, the eyes are gone, too. I'm zooming in on the picture and playing with the lighting and contrast and I can make out every detail in the head sculpt, but I'm just not seeing the eyes or nose. The overall head appears to be the same, but I wonder if it's made in two pieces and maybe they just replaced the eye section and plugged in the red vizor? It'd be really weird and very lazy if they just painted over the eyes in read.

Emerje

william-james88 wrote:By the way this proves that the nemeses ships that come with Galvatron are not actually in scale with Unicron

None of these accessories are properly to scale with each other or to Unicron. I'm not sure how these scale with the Autobot shuttle with WfC Unicron, though I suspect Galvatron's guns are closer than the new Revenge accessory. Won't know for sure until they're all in-hand.

Any rumors on price for this set? I'd guess $75, but that's a shot in the dark. We may know as soon as tomorrow.

AcademyofDrX wrote:

william-james88 wrote:By the way this proves that the nemeses ships that come with Galvatron are not actually in scale with Unicron

None of these accessories are properly to scale with each other or to Unicron. I'm not sure how these scale with the Autobot shuttle with WfC Unicron, though I suspect Galvatron's guns are closer than the new Revenge accessory. Won't know for sure until they're all in-hand.

Any rumors on price for this set? I'd guess $75, but that's a shot in the dark. We may know as soon as tomorrow.

I don't think you are far off. It's over 100$ in CA ada so 75$ USD makes sense.

AcademyofDrX wrote:None of these accessories are properly to scale with each other or to Unicron. I'm not sure how these scale with the Autobot shuttle with WfC Unicron, though I suspect Galvatron's guns are closer than the new Revenge accessory. Won't know for sure until they're all in-hand.

Unicron turns into a planet, nothing is in scale with him

That seriously puts the "Tron" in Galvatron. Can we somehow get a light-cycle Wreck-Gar?

Those tiny characters that come with Reformatting Galvatron are also in scale with Kingdom Ark, based on that tiny Optimus that comes with it.

-Kanrabat- wrote:Those tiny characters that come with Reformatting Galvatron are also in scale with Kingdom Ark, based on that tiny Optimus that comes with it.

Shame it's none of the pre-movie crew.

And yeah, $75 sounds right, but it could maybe even go as low as $62.99 seeing as how the Centurion Drone and Tricranius come with about the same amount of stuff for only $10 extra.

Emerje

Emerje wrote:Shame it's none of the pre-movie crew.
Emerje

Sigh.
Well, let's hope some 3D printer artist is making the OG cast in miro form!

Wow that Puffer looks great! I'm excited for it.

First-Aid wrote:That seriously puts the "Tron" in Galvatron. Can we somehow get a light-cycle Wreck-Gar?

If Wreck-Gar had been reformatted as well, that's exactly what he would have looked like.

Personally, I don't see the point of this deco, I don't recall Galvatron looking like that in the reformatting scene. I just remember a lot of horizontal lines. But it's been a while since I've seen the movie.

Emerje wrote:

-Kanrabat- wrote:Those tiny characters that come with Reformatting Galvatron are also in scale with Kingdom Ark, based on that tiny Optimus that comes with it.

Shame it's none of the pre-movie crew.

The Dinobots and Perceptor did at least live at the Ark on Earth, prior to the movie.

Rodimus Prime wrote:

First-Aid wrote:That seriously puts the "Tron" in Galvatron. Can we somehow get a light-cycle Wreck-Gar?

If Wreck-Gar had been reformatted as well, that's exactly what he would have looked like.

Personally, I don't see the point of this deco, I don't recall Galvatron looking like that in the reformatting scene. I just remember a lot of horizontal lines. But it's been a while since I've seen the movie.

He doesn't. Horizontal lines is what I remember too.

Sabrblade wrote:

Emerje wrote:

-Kanrabat- wrote:Those tiny characters that come with Reformatting Galvatron are also in scale with Kingdom Ark, based on that tiny Optimus that comes with it.

Shame it's none of the pre-movie crew.

The Dinobots and Perceptor did at least live at the Ark on Earth, prior to the movie.

Yeah, but they're more like passengers than crew. I sure wouldn't want the Dinobots on the bridge.

Emerje

Galvatron looks awful, not much they can do to rescue that figure but I want it for the little guys and the other bits. Hopefully sludge is in there then it can be the comics dinobots protecting the arc when it crashed.

So I got Commander Rodimus today, how long should I leave the trailer open and loose for the plastic to "correct" itself? I already tried closing the trailer and it wouldn't stay together at all. There's also quite a bit of loud plastic snapping moving the back section and ramp around.

chuckdawg1999 wrote:So I got Commander Rodimus today, how long should I leave the trailer open and loose for the plastic to "correct" itself? I already tried closing the trailer and it wouldn't stay together at all. There's also quite a bit of loud plastic snapping moving the back section and ramp around.

I left mine closed overnight after I first opened it and that seemed to help. Getting it to completely close was the tricky part. When closing it, make sure the grey parts are snapped into the sides. This will probably still leave a gap at the top when you try to close it. Once I got it that far, I used both hands to hold it closed at the top. After holding it that way for about a minute, I let go and it stayed in place. Then I left it overnight. Now I can get it to close pretty easily. Bumping it does sometimes make the gaps re-appear, but it can be easily closed again.

Damn, Hasbro just take all my money.

Magnus is up for $36 on Amazon for anyone that wasn't willing to pay the $50

So confused by that Galvatron tbh. He didn’t really look like that at all during the reformation scene? If that’s what they’re going for, they should have gone the route of the RED Megatron figure, or once again use the Siege Mold to show this.

I understand the original toy version Galvatron for Selects, but yeah the reformatting one is puzzling. I know they want to try to get their moneys worth out of each mold, but then again, there still hasn't been a reuse of Siege/ER Astrotrain or ER Doubledealer yet.

o.supreme wrote:I understand the original toy version Galvatron for Selects, but yeah the reformatting one is puzzling. I know they want to try to get their moneys worth out of each mold, but then again, there still hasn't been a reuse of Siege/ER Astrotrain or ER Doubledealer yet.

A waste because I'd buy a Select Astrotrain in NASA colors and Doubledealer could be easily repaint/remold into MW Soundwave.

-Kanrabat- wrote:

o.supreme wrote:I understand the original toy version Galvatron for Selects, but yeah the reformatting one is puzzling. I know they want to try to get their moneys worth out of each mold, but then again, there still hasn't been a reuse of Siege/ER Astrotrain or ER Doubledealer yet.

A waste because I'd buy a Select Astrotrain in NASA colors and Doubledealer could be easily repaint/remold into MW Soundwave.

This guy is onto something! For real, I’m such a fan of the Micromaster Space Shuttle duo, a much larger version would be fantastic. I’m not a huge fan of corporate logos on TFs but I’d make any exception for NASA.

Well now that we have Victory Saber, maybe we can have Galaxy Shuttle...someday . It would have to be roughly CC at least though, a reuse of Astrotrain wouldn't work. I believe there are a couple of other deep cut characters that might work for Astrotain.

As for Doubledealer...I know a LOT of people have been wanting MW Soundwave, which makes sense. I'd just want a Takara toy colored Doubleclouder (Interestingly in the Masterforce Anime he is colored to match the Hasbro Doubledealer instead), so "Toy Accurate Doubleclouder" would be my first choice for that mold.

Puffer looks great.

Looking at "Puffer" more closely, the helmet is Pipes, but the face isn't.... in a sense. Most headsculpts are actually made of two pieces, so it could very be that they made two faces; one for Pipes and the other for... whoever. It's worth noting the "Puffer" one is toy-accurate with the visor and mouthplate:


Transformers G1 1986 Pipes Gallery

... and we can expect retail Pipes to have a show-accurate one... while the alternate face/head of Huffer can be used for Road Ranger

o.supreme wrote:I believe there are a couple of other deep cut characters that might work for Astrotain.

Star Dasher

Picked up Red Alert to replace the awful Siege version. Not sure wether to to give hims sieges wheels for his shoulders or just to sell the siege one on and make some smalller dummy wheels. Kingdoms matching whites make him look a lot better but it still neded to have some engineering to fold away the huge rectangle on his back. at least I have a Red alert that for the most part doesnt need to hide behind other figures now. Shame the earthmode doesnt correct more of the figure and yet again I'll be skipping sideswipe.

Saw an image on instagram of the fossilizer combiner using ractonite and transmutate and it just didn't look as good imo. Even though I think tricranius looks better than ractonite, I already have wingfinger and paleotrex so I canceled tricranius to get a better looking combiner

And since ractonite is on sale on tfsource and ill get free shipping, I'm saving $15 more or less

I was finally able to find the wave 3 Deluxes at Target a couple weeks ago. Once again, having Tracks in hand, I think it's a very good figure, like Huffer, that some fans are just too critical of. Is he worth of the "Mini-Masterpiece" monicker? No, but he's not a terrible figure either. He's a good, modern, faithful G1 update that matches well with the rest of the War for Cybertron trilogy. The leg transformation isn't that hard at all when you understand what to do. As usual, the instructions aren't very helpful, but there are plenty of demonstrations of the transformation available on YouTube. The way the feet are attached for robot mode isn't ideal, but it's not a deal breaker either. You can work with it. The leg joints are a little loose and fiddly, but that could be down to quality control. My only major gripe with the figure is that it could have used some more paint apps. Kingdom Tracks is missing a LOT of the little sticker details from the G1 toy that were included in the Sunbow cartoon model. It makes him look kinda plain and unfinished in a way. I hope we get a more "Premium Finish" of this mold at some point. I'd be happy to double dip if it meant a much more screen accurate Tracks from this mold.

Wolfman Jake wrote:I was finally able to find the wave 3 Deluxes at Target a couple weeks ago. Once again, having Tracks in hand, I think it's a very good figure, like Huffer, that some fans are just too critical of. Is he worth of the "Mini-Masterpiece" monicker? No, but he's not a terrible figure either. He's a good, modern, faithful G1 update that matches well with the rest of the War for Cybertron trilogy. The leg transformation isn't that hard at all when you understand what to do. As usual, the instructions aren't very helpful, but there are plenty of demonstrations of the transformation available on YouTube. The way the feet are attached for robot mode isn't ideal, but it's not a deal breaker either. You can work with it. The leg joints are a little loose and fiddly, but that could be down to quality control. My only major gripe with the figure is that it could have used some more paint apps. Kingdom Tracks is missing a LOT of the little sticker details from the G1 toy that were included in the Sunbow cartoon model. It makes him look kinda plain and unfinished in a way. I hope we get a more "Premium Finish" of this mold at some point. I'd be happy to double dip if it meant a much more screen accurate Tracks from this mold.

So you actually managed to secure the outer leg panels in robot mode?! The two reviewers I've watched (one is very meticulous if I may add) had trouble with them.

Sabrblade wrote:

o.supreme wrote:I believe there are a couple of other deep cut characters that might work for Astrotain.

Star Dasher

You beat me to it. As a big Uprising fan, Star Dasher was first thing I thought of.

Also with Tracks, I dont see how anyone could get the legs/shins to lock in without mods. I love Tracks and forgive a lot to have a good figure of him, but this one just slips by to fairly good for me. Way too much clear plastic( wish they wouldnt use it and just paint on windows, nothing I want to see inside anyway)and Im scared to break it, not enough paint(Reprolabels gets my money again) and too lose/floppy.

New Red Alert is awesome though and quite an improvement.

Found this at my local hobby store where i get most of my transformers these days. from Zoids: Wild (I would have preferred a Liger model but they're not available) A Rapterrix to be specific which is a velociraptor model. I ditched the pilot figure and didn't like the "dinosaurs have hair feathers" so he doesn't have the spiky headcrest.
Part of why i bought him since it fits the range of transformers kingdom toys i've purchased throughout the year.

Here is my new Rapterrix compared to Deluxe Grimlock (CV Spark Armor) Kingdom Paleotrex and Siege Prime in terms of size. Rapterrix is the black and red toy.

To catch up:

Puffer: that head is the head that Pipes should have had, paint or molding wise. That is a great looking head.

Galvatron: that is a neat look for him, not something I will get, but it is neat.

Now for some other stuff:

I think we all need reminded just how nice T-Wrecks looks



Nemesis Primal has really proven to be the star of the Worlds Collide set for me. This is a surprisingly slick repaint






I really think this mold should have stayed cliff's mold. As a Bumblebee, it is OK, but it doesn't feel right. That Origins Bee is definitely the superior Bumblebee for me





I'll hopefully have thoughts on Scorpy and Wingfinger soon. just got them this weekend. I am excited for Wingfinger, he seems really neat so far. and thanks to them, I am done with Wave 3!

Jelze Bunnycat wrote:So you actually managed to secure the outer leg panels in robot mode?! The two reviewers I've watched (one is very meticulous if I may add) had trouble with them.

Another YTer diagnosed the problem on one of his figures as a pin that wasn't properly assembled. This video includes a fix for pushing it in the rest of the way with simple tools. The link was shared via tformers.
https://youtu.be/disoinbQNRA

AcademyofDrX wrote:

Jelze Bunnycat wrote:So you actually managed to secure the outer leg panels in robot mode?! The two reviewers I've watched (one is very meticulous if I may add) had trouble with them.

Another YTer diagnosed the problem on one of his figures as a pin that wasn't properly assembled. This video includes a fix for pushing it in the rest of the way with simple tools. The link was shared via tformers.
https://youtu.be/disoinbQNRA

Hmmm, an OCD dilemma. Easy to do and cleans up the gap, but at the risk of creating stress marks.

AcademyofDrX wrote:

Jelze Bunnycat wrote:So you actually managed to secure the outer leg panels in robot mode?! The two reviewers I've watched (one is very meticulous if I may add) had trouble with them.

Another YTer diagnosed the problem on one of his figures as a pin that wasn't properly assembled. This video includes a fix for pushing it in the rest of the way with simple tools. The link was shared via tformers.
https://youtu.be/disoinbQNRA

Thanks, this is super helpful.

Lets hope he also comes with the stand attachment for the nemesis to fit on the unicron stand.

Well, with the leak for Slammer, I think that's all of Wave 4 leaked... I will say, he is actually rather neat. I'm getting Animated Autotrooper vibes from him. I'll definitely pick up 1, maybe 2 or 3

Edit to add a picture:

Fellow Seibertronian Sentinel_Primal posted an image they found online giving us our very first look at Transformers Kingdom deluxe Slammer. This does indeed seem to be a completely new mold. It also looks like a weaponizer, which was the gimmick of the Siege line. While this toy (and the entirety of wave 4) has yet to be revealed, these will be appearing at retail in the next few months. With this photo, we now know what all the toys in wave 4 look like. For a quick recap, that wave includes deluxe Waspinator, Shadow Panther, Slammer and Pipes along with voyager Tigatron.

Let us know what you think of the figure!

His overall shape and proportions remind me of Combiner Wars Rook. His chest even looks like he has a CW Combiner port in his belly (but he really doesn't, it just looks like he does).

Sabrblade wrote:His overall shape and proportions remind me of Combiner Wars Rook. His chest even looks like he has a CW Combiner port in his belly (but he really doesn't, it just looks like he does).

He reminds me more of ER Airwave myself. Can't wait to see him next to his old pal Sixgun.

With some neat Repaint, he looks like Doomguy from Doom (since the head is too similar to doomguy)

Awesome been waiting for this. I can't wait to see how he interacts with T30 Metroplex. Airwave was my first thought as far as similarities as well. But I can see some CW likeness as well. This is the only wave 4 I am for sure getting. Can't wait to see better pics.

My first thought was a newer, tougher Autorooper. But I certainly get the Rook vibe, what with his only being able to hold weapons pegged onto the front of his non-fists.

My second thought was that we could possibly use a bigger, better Scamper than what came with our first Titan. Maybe.

Only took 35 years to get a robot mode..

Bumblevivisector wrote:My first thought was a newer, tougher Autorooper. But I certainly get the Rook vibe, what with his only being able to hold weapons pegged onto the front of his non-fists.

My second thought was that we could possibly use a bigger, better Scamper than what came with our first Titan. Maybe.

Definitely want a new Scamper. I wasn't happy with the one that came with Metroplex to begin with, but when the rest of the Titans came with larger bots...

That hinge in his belly is promising since on the original that was how his tower folded out. Looking forward to seeing more, especially with his arms facing the right way.

Emerje

Definitely liking Slammer, though with this leak, we now know what W4 looks like without any official confirmation. Leaks are super lame, they take away from official reveal events