Prime 1 Studio Teases Future Bumblebee Movie Optimus Prime Statue

I remember sending you guys an email about this six days ago. Welp, that sucks for me.

On Prime 1 Studio's Facebook page, we have a full gallery of their upcoming statue, The Last Knight Drift, ID'd as MMTFM-22. Check out the full gallery of the toy on their Facebook page here, or by clicking the image below. We have also have the product description below, which includes it's accessories, and it's dimensions.

If you like what you see, well, we also may feel bad for your wallet. But tell us your thoughts in the Pub forums below, and your thoughts on such statues in general!

"No pain. No anger. No hate.” Prime 1 Studio is proud to present MMTFM-22: Autobot Drift from The Transformers: The Last Knight. Autobot Drift also known as Master Swordsman is a true martial artist in combat. Against his enemies, he wields legendary warrior skills with a mastery no one can match. He remains cool and collected in the heat of battle by channeling ancient samurai discipline. When the exact moment arrives to attack, he draws his razor sharp sword to strike down Decepticons in a fraction of a second. He is a supporting character in the 2014 movie, Transformers: Age of Extinction and its sequel Transformers: The Last Knight. Autobot Drift comes with two set of arms to give a different look of the Masterful Autobot Swordsman.
[Product Specifications] - Size approximately 23 inches tall [(H)58.3cm (W)45.5cm (D)36.5cm] - Size approximately with swords equipped [(H)58.3cm (W)53.7cm (D)52.8cm] - One (1) designed theme base - LED Light-up function on Head - One (1) set of arms Greeting gesture - One (1) set of arms holding swords [Notice] Prototype samples are shown. Product details could be subjected to change without further notice.

That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

-Kanrabat- wrote:

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

They are about as wrong as many G1 MPs are wrong. They are really accurate and are better than the statues cause they can transform. to me, they do it better justice by this fact. 100% perfection is only achievable on a statue yes, but that is the same for almost any design, including the new MPs, so I still say MPM Bee and Barricade are proof you can truly give justice to movie figures and still transform

D-Maximal_Primal wrote:

-Kanrabat- wrote:

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

They are about as wrong as many G1 MPs are wrong. They are really accurate and are better than the statues cause they can transform. to me, they do it better justice by this fact. 100% perfection is only achievable on a statue yes, but that is the same for almost any design, including the new MPs, so I still say MPM Bee and Barricade are proof you can truly give justice to movie figures and still transform

Yes, but that's not the point of the statue. The statue don't mean interaction. It only serve for the perfect look. Both serve different purposes. Thus it's like comparing apple and orange.

On Prime 1 Studio's Facebook page, we have a full gallery of their upcoming statue, Bumblebee Optimus Prime, ID'd as MMTFM-26. Check out the full gallery of the toy on their Facebook page here, or by clicking the image below. We have also have the product description below, which includes it's accessories, and it's dimensions. Of note, there are exclusive accessories for the, well, exclusive version, a Decepticon Seeker head and a forearm for the base!

If you love the Bumblebee movie Optimus, and have the cash to spend, this may be for you! If you enjoy or don't like what you see, tell us your thoughts on the Pub forums below!

“B-127, I pray this message finds you. Our war rages on. Planet Earth… Survival…” Prime 1 Studio is proud to present MMTFM-26: Optimus Prime Cybertron Edition from Transformers film, Bumblebee (2018 Film). The concept for the film was developed during the writers’ room assembled in the lead up to Transformers: The Last Knight and will be written by Christina Hodson and directed by Travis Knight. The old-fashioned storyline comes along with the brand newly discovery of our well-known Autobots member. Leader of the Autobot rebels during the war for Cybertron, Optimus Prime took part in the final battle for Cybertron against the Decepticons. He comes with two alternative right-arm holding the Ion Blaster and LED Light function on eyes. The Exclusive version comes with some Decepticon Seeker parts to be displayed on the base of Optimus Prime. This is a must have for all Transformers fans. 【Product Specifications】 ・Size approximately 32 inches tall [(H):81.9cm (W):50.6cm (D):44.9cm] ・Size approximately 32 inches tall with Blaster raised [(H):82.1cm (W):61.2cm (D):44.9cm] ・LED functions on Eyes ・One (1) designed base inspired from Cybertron planet ・Two (2) interchangeable Right-arm holding the Ion Blaster ・Decepticon Seeker parts (In the exclusive version only) [Notice] 3D renders for reference only. Prototype samples shown. Product details could be subjected to change without further notice.

As usual, Prime 1 knock it out of the park.
This look bad-ass!

He chonk in a good way

Just in from Prime 1 Studio on YouTube is a short unboxing video of the incredibly huge 37 inch tall Prime 1 Studios MMTFM-14 Transformers Dark of the Moon Shockwave! This amazing piece of art comes in parts which require assembly, including the giant tendrils of his pet Driller. This items comes at a hefty price tag of $2699.00 and is available through Prime 1 Studio directly. Read the product description below and check out the video before heading back here to share your thoughts in the forum. As always stay tuned to Seibertron for the ultimate in Transformers news!

"Here is the unboxing video of this enormous masterpiece - Shockwave Statue!
Let's assemble it together! Hopefully, it will be a helpful video for those who ordered this piece.

“Emotionless, coldly logical, utterly ruthless... killing is all Shockwave lives for.” — Optimus Prime

Prime 1 Studio is proud to present MMTFM-14: Shockwave from The Transformers: Dark of the Moon. Shockwave was left to watch Cybertron by Megatron long ago, arriving on Earth to hunt for the AllSpark shortly after Megatron. A peerless scientist with deadly efficiency and a cold devotion to logic, he is one of the very few who could rival Megatron. Shockwave is ready and willing to destroy the Autobots with his arm-mounted AstroMag Cannon. Most anticipated Decepticons Transformers Statue standing at 37 inches tall.

Specifications:
LED functions on eye, cannon and backpack

Notice:
Prototype samples shown.
Product details could be subjected to change without further notice."

Okay, that was one of he coolest videos I’ve seen and I don’t know a lot about prime 1 stuff so I gotta ask, are they just held together by magnets?

Damn. This is quite impressive and it's brilliant to see that everything hold with magnets. But man, one must take a mortgage in order to afford the thing and it's shipping cost!

Man that’s a lotta pieces. I thought it would be like arms and legs attaching to the torso. I loved this Shockwave design. Hopefully a Studio Series fig isn’t far off

Thanks to a few posts to TFsource's Twitter account yesterday we have some images of the amazing upcoming Bumblebee movie Soundwave statue from Prime 1 Studio. Still no official word on price or release yet but once you see this thing you will likely be quite willing to sit tight patiently and start saving money because, wow. This bot looks absolutely stunning and like he just came off the movie screen. As he was in the movie, this Soundwave comes with his stealthiest and most cunning of minions, the fearsome Ravage. Just ogle the details on not just Soundwave but Ravage too and you will think this is a genuine production model from the movie. As always share your thoughts in the forum and stay tuned to Seibertron for further details on this upcoming piece of toy art.

I can afford to look at the pretty pictures at least.

The design of Ravage's head looks more wolf-like than panther. Grant it he has always had a long snout, but definitely getting a more canine vibe here.

Ironhide516 wrote:The design of Ravage's head looks more wolf-like than panther. Grant it he has always had a long snout, but definitely getting a more canine vibe here.

I always saw Ravage as a "cat-dog".

-Kanrabat- wrote:

Ironhide516 wrote:The design of Ravage's head looks more wolf-like than panther. Grant it he has always had a long snout, but definitely getting a more canine vibe here.

I always saw Ravage as a "cat-dog".

Wasn't that a Nickelodeon cartoon back in the day

Whatever happened with that Arcee Stature we saw the prototype for, wasn't like last year?