Seibertron.com Energon Pub Forums

News Credits: 15 · by **PrymeStriker** » Sun Jan 06, 2013 2:14 pm

I might buy the AM version if this Smokescreen is capable of doing a head-swap. Otherwise, I'll wait for the possible Reprolabels set. Some of the colors are atrocious.

kirbenvost wrote:It looks like has some sort of wings in the package.

It's the doors. You can see some of the red in the same place on the vehicle mode's doors. One reason this version is superior; door wings instead of micron wings.

News Credits: 317 · by **chuckdawg1999** » Sun Jan 06, 2013 2:21 pm

Any idea how to order from tao bao? Do I need a middle man?

News Credits: 251 · by **Mindmaster** » Sun Jan 06, 2013 2:22 pm

Oh, the irony....

If the armor has removable capabilities, this may be the only Beast Hunters figure I get. If not, oh well, better luck next time, Hasbro. >:oP

News Credits: 3 · by **Breakdown318** » Sun Jan 06, 2013 2:23 pm

Smokescreen looks awesome. As for bulkhead, could this suggest a deluxe breakdown?

by **Gearslide** » Sun Jan 06, 2013 2:50 pm

Seeing as how SS has the removable BH armor, the only issue I have with him is the blue details on his head. Hasbro simply used the wrong colors. The crest should have been white and the eyebrows and beard should have been red (which is used on the figure's knees and elbows). I don't get the reasoning.

And that Bulkhead shall take his rightful place on my shelf as a Prime Brawn (seeing as how his GDO figure died before production).

News Credits: 251 · by **Mindmaster** » Sun Jan 06, 2013 2:52 pm

Gearslide wrote:Seeing as how SS has the removable BH armor, the only issue I have with him is the blue details on his head. Hasbro simply used the wrong colors. The crest should have been white and the eyebrows and beard should have been red (which is used on the figure's knees and elbows). I don't get the reasoning.

And that Bulkhead shall take his rightful place on my shelf as a Prime Brawn (seeing as how his GDO figure died before production).

Red crest, white chin!

News Credits: 3 · by **Manterax Prime** » Sun Jan 06, 2013 3:00 pm

A proper Smokescreen? I knew Hasbro was getting back on the ball with Beast Hunters!!!!
THANK YOU HASBRO!!!!

Shame Bulkhead isn't a voyager, thought it's better than just having a cyberverse figure. I really like his buzzsaw as well.

News Credits: 2 · by **Twitchythe3rd** » Sun Jan 06, 2013 3:07 pm

Bulkhead has monkey arms.

Smokescreen doesn't look that bad. Better if the armor comes off.

News Credits: 1 · by **SkyWarpsGhost** » Sun Jan 06, 2013 3:30 pm

If and I mean IF Smokescreens armour does come off. It smells to me that Hasbro had this guy read for the last waves of RID, but just held him back and added some clip on armor so he would fit in aesthetically with the rest of the BH line.

by **Gearslide** » Sun Jan 06, 2013 3:38 pm

Mindmaster wrote:
Gearslide wrote:Seeing as how SS has the removable BH armor, the only issue I have with him is the blue details on his head. Hasbro simply used the wrong colors. The crest should have been white and the eyebrows and beard should have been red (which is used on the figure's knees and elbows). I don't get the reasoning.

And that Bulkhead shall take his rightful place on my shelf as a Prime Brawn (seeing as how his GDO figure died before production).

Red crest, white chin!

I'm not sure which Smokescreen you're talking about, but:

He clearly has a white crest (the middle thing), red "eyebrows" (the things to the left and right of his crest), and a red "beard".

All three of those things are blue on the toy.

News Credits: 15 · by **PrymeStriker** » Sun Jan 06, 2013 3:49 pm

Gearslide wrote:He clearly has a white crest (the middle thing), red "eyebrows"

The "eyebrows" are part of headcrest. :???:

by **Gearslide** » Sun Jan 06, 2013 3:52 pm

PrymeStriker wrote:
Gearslide wrote:He clearly has a white crest (the middle thing), red "eyebrows"

The "eyebrows" are part of headcrest.

From what I understand about the term "crest" or "comb", it just refers to the central part. You couldn't say the feathers on the left and right of a Cockatiel's crest are part of the crest, would you?

News Credits: 15 · by **PrymeStriker** » Sun Jan 06, 2013 4:17 pm

Gearslide wrote:
PrymeStriker wrote:
Gearslide wrote:He clearly has a white crest (the middle thing), red "eyebrows"

The "eyebrows" are part of headcrest.

From what I understand about the term "crest" or "comb", it just refers to the central part.

Yes, but these red parts are not detached from the crest. They extend backward from it. My point is they aren't eyebrows; they don't move depending on expression.

by **XDMan** » Sun Jan 06, 2013 4:26 pm

Well I do think it would be awkward seeing BH being a deluxe, but it does homage Brawn more than Roadbuster. I mean, look at this:

Oh, wait...they both resemble him.

And SS does look nice as well, so good job Takara and Hasbro, you just made yourself a more decent mold.

News Credits: 6188 · by **Va'al** » Sun Jan 06, 2013 4:54 pm

PrymeStriker wrote:
Gearslide wrote:
PrymeStriker wrote:
Gearslide wrote:He clearly has a white crest (the middle thing), red "eyebrows"

The "eyebrows" are part of headcrest.

From what I understand about the term "crest" or "comb", it just refers to the central part.

Yes, but these red parts are not detached from the crest. They extend backward from it. My point is they aren't eyebrows; they don't move depending on expression.

I think what Gearslide is talking about are the two very thin lines above his eyes, which have a vague red tinge to them.

The figure in the photo seems to have inverted the colouring, with the crest left white, and the side crest bits coloured (albeit in blue). Fixable.

News Credits: 15 · by **PrymeStriker** » Sun Jan 06, 2013 5:00 pm

Mmm. Okay.

Well, if Reprolabels makes a set for this (which he desperately needs), not only would I like stickers to fix some of his atrocious paint, but also include some Elite Guard insignias. Maybe even take the extra step to include stickers that turn him into his Cybertronian scheme entirely!

I don't know how I could thank Hasbro enough for giving him his own mold. :KREMZEEK:

News Credits: 438 · by **Sabrblade** » Sun Jan 06, 2013 5:35 pm

Can't wait for these.

News Credits: 10 · by **Arctorro** » Sun Jan 06, 2013 6:00 pm

Smokescreen is the first BH toy that I'm thinking of pre-ordering! Not sold on the rest of the line and waiting to make a decision later, but SS is a must have if he has been done right

News Credits: 10 · by **gavinfuzzy** » Sun Jan 06, 2013 6:28 pm

chuckdawg1999 wrote:Any idea how to order from tao bao? Do I need a middle man?

Don't bother. No middle man i know ships tabao orders to the us. Shipping to singapore alone is actually rather costly. If you somehow mannage to get this into the us, i assue you it would take over 2 months and cost around $50usd for both. I'll just wait.

by **Autobot Strider** » Sun Jan 06, 2013 6:28 pm

Okay, colour me impressed... BH does look pretty awesome, but I'll pass as I've got the PRID Voyager. SS is 100% buy - his flaws are nothing that clippers and paint/labels can't fix.

I really wonder though, the more I see these Beast Hunters figures, if this isn't just a gimmick that is toyline only (ala Mechtech)... I'm not doubting that we'll see Predaking and *possibly* some other Predacons in-show, but I'll be really suprised if the Autobot cast gets a "Mad Max Makeover", let alone all their fancy beast-hunting weapons for a shorter season. From the preview of Season 3, it looks like Predaking is the "Autobot Hunter" and not the other way around... I guess time will tell though!

Regardless... I don't see myself picking up any cast members from the BH line that I have from FE or PRID, but since Smokescreen doesn't fit in to either of those categories I will buy him even if the armour is permanent!

News Credits: 10 · by **gavinfuzzy** » Sun Jan 06, 2013 6:29 pm

*double posted*

Who was the one who suggested bulkhead as brawn? You're making me want a toy i don't really like. D:

by **Henry921** » Sun Jan 06, 2013 6:30 pm

Just be patient. The goodness will be here soon enough. And it should convince a few of us who were on the fence about ordering AM Smokescreen to wait just a bit longer.

by **Gundamu** » Sun Jan 06, 2013 6:41 pm

Thank GOD Smokescreen gets a new mold and isn't just a repaint of Knockout. I hope that armor is removable like others have said. I can also see myself turning that net gun into a regular blaster but removing the web parts. Bulkhead looks freaking awesome. I'm glad there's gonna be a deluxe version of him.