I recently bought my DOTM Starscream, but he came with some issues. For one, his weapons were loose when combined, but I took care of that.
But there's another problem. His jet mode front part is a little loose, so when he' not touching the ground with his landing gear, he looks down a little.
I found that this 'screw'is loose. Any suggestions?
http://imageshack.us/photo/my-images/694/69337469.png/
Problem with DOTM Starscream
7 posts
• Page 1 of 1
Problem with DOTM Starscream
- Motto: "Keep your enemies close, and their limbs apart..."
- Weapon: Vibro-Axe
The below statement is true
The above statement is false
The above statement is false
- mtma
- Minibot
- Posts: 116
- Joined: Mon Dec 20, 2010 7:57 pm
- Location: Brazil
- Strength: 6
- Intelligence: 8
- Speed: 5
- Endurance: 8
- Rank: 8
- Courage: 6
- Firepower: 10
- Skill: 10
Re: Problem with DOTM Starscream
- Motto: "60% of the time, it works every time!"
- Weapon: Black Magic
I would suggest taking it back for a replacement if you're not able to fix it...... The only thing I can come up with.
-
NTESHFT - Brainmaster
- Posts: 1440
- Joined: Sun Jun 27, 2010 5:50 pm
- Location: Dirty South
- Buy from NTESHFT on eBay
- Alt Mode: NISMO 370Z
- Strength: 8
- Intelligence: 7
- Speed: 9
- Endurance: 7
- Rank: 5
- Courage: 7
- Firepower: 10
- Skill: 7
Re: Problem with DOTM Starscream
- Motto: "Keep your enemies close, and their limbs apart..."
- Weapon: Vibro-Axe
Hmm, that would be a little difficult. Isn't there any trick like glue or something to tighten up that joint?
The below statement is true
The above statement is false
The above statement is false
- mtma
- Minibot
- Posts: 116
- Joined: Mon Dec 20, 2010 7:57 pm
- Location: Brazil
- Strength: 6
- Intelligence: 8
- Speed: 5
- Endurance: 8
- Rank: 8
- Courage: 6
- Firepower: 10
- Skill: 10
Re: Problem with DOTM Starscream
Can you tighten the screw w/ a screw driver?
The glue trick is mainly used on ball joints. Since I don't own this version of Starscream, I don't know if the glue trick would work on this type of joint.
The glue trick is mainly used on ball joints. Since I don't own this version of Starscream, I don't know if the glue trick would work on this type of joint.

- SnapTrap
- Targetmaster
- Posts: 652
- News Credits: 4
- Joined: Fri Aug 29, 2003 12:28 am
Re: Problem with DOTM Starscream
- Motto: "The only good is knowledge, and the only evil is ignorance."
SnapTrap wrote:Can you tighten the screw w/ a screw driver?
The glue trick is mainly used on ball joints. Since I don't own this version of Starscream, I don't know if the glue trick would work on this type of joint.
You can't: the joint in question is a twin double hinge, to provide space for the head to go through. As they're hinges, they're set with metal rods, not screws (screws have indents, either a straight line for a flathead screwdriver, or the more common cross for a Phillips). Like ball joints, they rely totally on friction, which I why I slightly detest them. They're also nigh-impossible to disassemble.
The resident Rewind... well, half of one 
- Jelze Bunnycat =:3
Looking for:
- TR Furos (Hardhead's head) and Crashbash (lost him
)
- PotP Punch head
- TR Galvatron right arm (the gun one)
- CW Brake-Neck/UW Wildrider, CW Offroad
- TR Twinferno & Grotusque
- Greenlight, Lancer and PotP Elita-1
- Legacy Core Slug, Sludge & Snarl

- Jelze Bunnycat =:3
Looking for:
- TR Furos (Hardhead's head) and Crashbash (lost him

- PotP Punch head
- TR Galvatron right arm (the gun one)
- CW Brake-Neck/UW Wildrider, CW Offroad
- TR Twinferno & Grotusque
- Greenlight, Lancer and PotP Elita-1
- Legacy Core Slug, Sludge & Snarl
-
Jelze Bunnycat - God Of Transformers
- Posts: 19422
- News Credits: 241
- Joined: Thu Feb 17, 2005 6:45 am
- Location: McKinney, Texas, USA; Delft, the Netherlands
- Strength: 5
- Intelligence: 9
- Speed: 8
- Endurance: 7
- Rank: 1
- Courage: 8
- Skill: 5
Re: Problem with DOTM Starscream
- Motto: "When did I get this tattoo?"
- Weapon: Thrust Gun
Unfortuenately I have both problems with Starscream. They don't bother me, and I don't quite know how to fix it, since the screw that you circled is a hinge screw. You might need to google it or somethin'....
P.S: I guess you could say my 1st Starscream's guns were tight, because I plugged them in, but once I pulled them apart, the peg plastic snapped right off. I got another one but now the new one has it a bit loose.
P.S: I guess you could say my 1st Starscream's guns were tight, because I plugged them in, but once I pulled them apart, the peg plastic snapped right off. I got another one but now the new one has it a bit loose.

By "Kim Yura" & "Zimmo81"
Henry921 wrote:You can always be counted on to listen to reason, Pryme.
Dead Metal wrote:Have you ever, and i mean ever seen/read/heard something that is completely original and does not copy/homage/pay tribute to something else? Here's a hint: Nope. You never have and you never will.
-
PrymeStriker - Guardian Of Seibertron
- Posts: 5961
- News Credits: 15
- Joined: Tue Jun 10, 2008 1:57 pm
- Location: Happytown, Hell
- Alt Mode: An Enormous Red Rocket
- Strength: 1
- Intelligence: 1
- Speed: 1
- Endurance: 1
- Rank: 1
- Courage: 1
- Firepower: Infinity
- Skill: 1
Re: Problem with DOTM Starscream
- Motto: "Keep your enemies close, and their limbs apart..."
- Weapon: Vibro-Axe
I solved the blades issue with glue on the pin that connects the weapons, made it very solid and it does not pop off easily anymore.
The below statement is true
The above statement is false
The above statement is false
- mtma
- Minibot
- Posts: 116
- Joined: Mon Dec 20, 2010 7:57 pm
- Location: Brazil
- Strength: 6
- Intelligence: 8
- Speed: 5
- Endurance: 8
- Rank: 8
- Courage: 6
- Firepower: 10
- Skill: 10
7 posts
• Page 1 of 1
Return to Transformers Toys Discussion
Who is online
Registered users: Apple [Bot], Bing [Bot], ChatGPT [Bot], Google [Bot], Google Adsense [Bot], MSN [Bot], OpenAI [Bot], Silver Wind, Yahoo [Bot], Yandex [Bot]