>
shop.seibertron.com amazon.seibertron.com Facebook Twitter X YouTube Pinterest Instagram Myspace LinkedIn Patreon Podcast RSS
This page runs on affiliate links — your clicks may earn us a few Shanix. Want the full transmission? Roll out to our Affiliate Disclosure.

TF Prime Hot Rod upgrade kit Version 2 (shapeways)

Post all your customized Transformers here. Whether it's a small mod or a true kitbash, we'd love to see it!

TF Prime Hot Rod upgrade kit Version 2 (shapeways)

Postby zoso1900 » Sat Feb 09, 2013 12:33 pm

Here is my upgrade kit to turn the Transformers Prime Wheeljack mold into Transformers Prime Hot Rod!

*Update*

Version two of everything is ready to go.

For the head I used two base models with slight variations which gives me a total of 8 different versions. I think this is a good way to give everyone something that fits their needs. Both of the base models have been tested using FUD. The ball joint was a little loose do to production but it was easily fixed with some clear nail polish. With the test shot one of the horns broke off at some point, I doubled the thickness of the horns so they should be a stronger. I have also found out that during transformation it works best to rotate the head around and tilt it forward slightly, this will ensure that the head will not be in bind when in car mode. (I would like to thank Neekotron for his help with the design of the second head.)

The pipes and spoiler are now on ball joints to make them integrated with the transformation. The pipes and spoiler have been tested using WST and is the recommended material.

The pipes are held on using clips that slide on the lip at the bottom of the door/arm. The ball joint for the pipes can be a little loose but will hold in place without a problem. With them being on a ball joint it makes it so they can be angled to fill in some of the space between the pipes and door.

The spoiler sits a little high in car mode but gives good clearance in bot mode. It plugs into the location of the current, smaller stock spoiler. It is tight without the placement of screws but the mount has holes to allow the reuses the stock screws that are used with the stock spoiler.

Now that everything is reworked I will try my hand at painting, this should prove to be interesting.

Thanks for looking and please leave suggestions and comments.

Everything can be found in my Shapeways shop. http://www.shapeways.com/shops/benbots?l=36&galleryViewList=0

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Attachments
cad.jpg
029.JPG
025.JPG
023.JPG
021.JPG
017.JPG
015.JPG
011.JPG
674x501_915766_806139_1360425560.jpg
674x501_915572_805945_1360417131.jpg
Last edited by zoso1900 on Wed Mar 06, 2013 8:21 am, edited 2 times in total.
zoso1900
Mini-Con
Posts: 10
Joined: Tue Jul 10, 2012 6:23 am

Re: TF Prime Hot Rod upgrade kit (shapeways)

Postby wulongti » Sat Feb 09, 2013 9:53 pm

Weapon: Battle Blades
very cool man, looks great. The head doesn't say "hot rod" to me though. Looks more like an Iron Hide. I think it's the lack of head crest that's doing it.

The wings fit nicely though and I look forward to seeing further developments in this project.
wulongti
Fuzor
Posts: 272
Joined: Mon Jul 06, 2009 9:27 am
Location: Highland Lakes, NJ
Watch wulongti on YouTube
Buy from wulongti on eBay
Strength: 6
Intelligence: 8
Speed: 7
Endurance: 5
Rank: 3
Courage: 8
Firepower: 2
Skill: 5

Re: TF Prime Hot Rod upgrade kit (shapeways)

Postby Tresob » Sun Feb 10, 2013 12:38 pm

That works pretty well, actually! Neato! Good eye seeing Hot Rod through all that garish Dead End coloring.

I would tend to agree that the expression could be a bit more Hot Rod-esque...and he'd probably be the only Prime cast member with a sniffer as he is. But that's just me. (I give you huge props for getting his head proportionate. My own attempt at a Hot Rod head in Sketchup yielded a far less healthy-looking cranium.)
User avatar
Tresob
Headmaster Jr
Posts: 522
News Credits: 3
Joined: Wed Jun 30, 2010 4:48 pm

Re: TF Prime Hot Rod upgrade kit (shapeways)

Postby BeastProwl » Sun Feb 10, 2013 4:58 pm

Motto: "Gravity Hurts"
Weapon: Razor Tipped Wing Swords
Awesome!

Though in canon, Hotshot is actually Hotrod, so it would be strange owning 2. But still, pretty creative.
Image

Check out my Art Thread! It actually gets updated from time to time!
http://www.seibertron.com/energonpub/beastprowl-s-art-thread-t102641s50.php

Also taking commissions! Inquire via PM if interested :D
BeastProwl
Guardian Of Seibertron
Posts: 5611
News Credits: 6
Joined: Wed Apr 06, 2011 3:13 pm
Location: The Badass Crater of Badassitude
Strength: 10+
Intelligence: 9
Speed: 10+
Endurance: 7
Rank: ???
Courage: Infinity
Firepower: 10+
Skill: 9

Re: TF Prime Hot Rod upgrade kit (shapeways)

Postby zoso1900 » Wed Mar 06, 2013 8:18 am

*Update*

Version two of everything is ready to go.

For the head I used two base models with slight variations which gives me a total of 8 different versions. I think this is a good way to give everyone something that fits their needs. Both of the base models have been tested using FUD. The ball joint was a little loose do to production but it was easily fixed with some clear nail polish. With the test shot one of the horns broke off at some point, I doubled the thickness of the horns so they should be a stronger. I have also found out that during transformation it works best to rotate the head around and tilt it forward slightly, this will ensure that the head will not be in bind when in car mode. (I would like to thank Neekotron for his help with the design of the second head.)

The pipes and spoiler are now on ball joints to make them integrated with the transformation. The pipes and spoiler have been tested using WST and is the recommended material.

The pipes are held on using clips that slide on the lip at the bottom of the door/arm. The ball joint for the pipes can be a little loose but will hold in place without a problem. With them being on a ball joint it makes it so they can be angled to fill in some of the space between the pipes and door.

The spoiler sits a little high in car mode but gives good clearance in bot mode. It plugs into the location of the current, smaller stock spoiler. It is tight without the placement of screws but the mount has holes to allow the reuses the stock screws that are used with the stock spoiler.

Now that everything is reworked I will try my hand at painting, this should prove to be interesting.

Thanks for looking and please leave suggestions and comments.

Everything can be found in my Shapeways shop. http://www.shapeways.com/shops/benbots?l=36&galleryViewList=0

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
zoso1900
Mini-Con
Posts: 10
Joined: Tue Jul 10, 2012 6:23 am

Re: TF Prime Hot Rod upgrade kit Version 2 (shapeways)

Postby wulongti » Wed Mar 06, 2013 8:21 am

Weapon: Battle Blades
looks great man, I'm looking forward to seeing it all painted up :D
wulongti
Fuzor
Posts: 272
Joined: Mon Jul 06, 2009 9:27 am
Location: Highland Lakes, NJ
Watch wulongti on YouTube
Buy from wulongti on eBay
Strength: 6
Intelligence: 8
Speed: 7
Endurance: 5
Rank: 3
Courage: 8
Firepower: 2
Skill: 5


Return to Customizations


[ Incoming message. Source unknown. ] No Signal - Please Stand By [ Click to attempt signal recovery... ]


Transformers and More @ The Seibertron Store

Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr B Oni Press Comics 2025 0425ON595 1B (CA) Kerschl"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr E Foil Oni Press Comics 2025 0425ON598 1E Kerschl"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr D Oni Press Comics 2025 0425ON597 1D (CA) Mason"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BUG WARS #3 2nd ptg Image Comics 2025 0225IM946 (CA) Asrar + Wilson (W) Aaron"
BUG WARS #3 2nd pt ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr C Oni Press Comics 2025 0425ON596 1C (CA) Mason"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr G 1:20 Oni Press Comics 2025 0425ON600 1G (CA) Kano"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr A Oni Press Comics 2025 0425ON594 1A (CA) Weaver"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr F 1:10 Oni Press Comics 2025 0425ON599 1F (CA) Ryp"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr I 1:100 Oni Press Comics 2025 0425ON602 1I Bisley"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BUG WARS #4 Cvr B Image Comics 2025 0325IM281 4B (CA) Corona (W) Aaron"
BUG WARS #4 Cvr B ...
Visit shop.seibertron.com to buy "BUG WARS #5 Cvr A Image Comics 2025 0425IM317 5A (CA) Asrar + Wilson (W) Aaron"
BUG WARS #5 Cvr A ...
Visit shop.seibertron.com to buy "BIKER MICE FROM MARS #1 Cvr H 1:50 Oni Press Comics 2025 0425ON601 1H (CA)Bisley"
BIKER MICE FROM MA ...
Visit shop.seibertron.com to buy "BUG WARS #5 Cvr B Image Comics 2025 0425IM318 5B (CA) Stokoe (W) Aaron"
BUG WARS #5 Cvr B ...
Visit shop.seibertron.com to buy "BUG WARS #1 3rd ptg Image Comics 2025 1224IM970 (CA) Momoko (W) Aaron"
BUG WARS #1 3rd pt ...
These are affiliate links. We may earn a commission.
Details subject to change. See listing for latest price and availability.

Featured Products on Amazon.com

Buy "Transformers Authentics Grimlock Action Figure" on AMAZON
Buy "Transformers Authentics Optimus Prime" on AMAZON
Buy "Transformers Deluxe 20 Mercenary Action Figure" on AMAZON
Buy "Transformers Generations Power of The Primes Deluxe Class Sinnertwin" on AMAZON
Buy "Transformers Generations Titans Return Deluxe Misfire and Aimless" on AMAZON
Buy "Transformers Generations Titans Return Deluxe Windblade and Scorchfire" on AMAZON
Buy "Transformers: Generations Power of The Primes Megatronus Prime Master" on AMAZON
Buy "Transformers: Generations Power of The Primes Deluxe Class Dinobot Sludge" on AMAZON
Buy "Transformers MV5 Turbo Changer Super Nova Action Figure" on AMAZON
Buy "Transformers Generations Titans Return Autobot Sovereign and Alpha Trion" on AMAZON
Buy "Transformers Generations Combiner Wars Deluxe Class Prowl Figure" on AMAZON
Buy "Transformers Generations Combiner Wars Legends Class Skywarp Figure" on AMAZON
These are affiliate links. We may earn a commission.
Details subject to change. See listing for latest price and availability.