The Energon Pub

News Credits: 3 · by **NatsumeRyu** » Fri Jul 29, 2011 10:19 pm

t$money$49 wrote:Just noticed that dotm cyberverse hatchets guns can combine into a rifle. All you do is just plug the the gatling gun onto the back of the other gun.

*gets out Hatchet*
Wow.

I love how this and laserbeak's weapon's combine! This makes them even cooler!

by **MINDVVIPE** » Tue Aug 02, 2011 5:42 am

Was foolin round and found this big gun arm for Universe Blaster... (seems to give the excessive kibble less attention).

by **Godzillabot Primal** » Tue Aug 02, 2011 11:02 am

If you cannot stand having Universes Dinobot’s tail chopper thing lying next to him, you’re in luck!

Look at him from a top point of view there is a small notch in the plastic behind his head and if you take the little missile launcher trigger (at the base of the tail) and peg it in

News Credits: 5 · by **--B--** » Tue Aug 02, 2011 7:14 pm

If you leave 20th Anniversary MP Optimus Prime in truck mode for too long, there is a small spot in where the face mask touches. If you let it sit for a while like mine has, it will LEAVE A BIG FREAKING CUT IN THE MIDDLE OF THE MASK!!! :BOOM:

FFFFFffffffffff.

by **Godzillabot Primal** » Tue Aug 02, 2011 9:01 pm

DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

News Credits: 3 · by **ArmadaPrime** » Wed Aug 03, 2011 3:34 am

godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

by **Godzillabot Primal** » Wed Aug 03, 2011 9:04 am

ArmadaPrime wrote:
godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

Yeah, sorry, I should’ve specified :oops:

Still, it allows you not to have it just sitting next to the figure on your shelf

News Credits: 3 · by **ArmadaPrime** » Wed Aug 03, 2011 10:03 am

godzillabot wrote:
ArmadaPrime wrote:
godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

Yeah, sorry, I should’ve specified

Still, it allows you not to have it just sitting next to the figure on your shelf

no worries mate

(btw, no offense but i think that's pretty common knowledge by now anyway.

News Credits: 9 · by **Mykltron** » Wed Aug 03, 2011 12:09 pm

ArmadaPrime wrote:
godzillabot wrote:
ArmadaPrime wrote:
godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

Yeah, sorry, I should’ve specified

Still, it allows you not to have it just sitting next to the figure on your shelf

no worries mate
(btw, no offense but i think that's pretty common knowledge by now anyway.

That doesn't matter. This is a thread about what people haven't noticed. Having said that, I just realised that he said he only just bought the figure so he shouldn't have posted it!

by **Godzillabot Primal** » Wed Aug 03, 2011 3:13 pm

Mykltron wrote:
ArmadaPrime wrote:
godzillabot wrote:
ArmadaPrime wrote:
godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

Yeah, sorry, I should’ve specified

Still, it allows you not to have it just sitting next to the figure on your shelf

no worries mate
(btw, no offense but i think that's pretty common knowledge by now anyway.

That doesn't matter. This is a thread about what people haven't noticed. Having said that, I just realised that he said he only just bought the figure so he shouldn't have posted it!

I did what to the who now?

Okay I'm sorry if that is common know-how :oops:

News Credits: 217 · by **Diem** » Wed Aug 03, 2011 4:50 pm

godzillabot wrote:
Mykltron wrote:
ArmadaPrime wrote:
godzillabot wrote:
ArmadaPrime wrote:
godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

Yeah, sorry, I should’ve specified

Still, it allows you not to have it just sitting next to the figure on your shelf

no worries mate
(btw, no offense but i think that's pretty common knowledge by now anyway.

That doesn't matter. This is a thread about what people haven't noticed. Having said that, I just realised that he said he only just bought the figure so he shouldn't have posted it!

I did what to the who now?

Okay I'm sorry if that is common know-how

Mykl's saying that this thread is for figures that you've had for a long time and you never realised something rather than new figures that you're still fiddling with.

News Credits: 9 · by **Mykltron** » Wed Aug 03, 2011 6:09 pm

Diem wrote:
godzillabot wrote:
Mykltron wrote:
ArmadaPrime wrote:
godzillabot wrote:
ArmadaPrime wrote:
godzillabot wrote:DOTM Meg’s (which I just bought) cowl head cover can switch around so that it sits flush to the rest of the cowl and you don’t have to take off the head cover when you have him in vehicle mode

?
do you mean how the hood part can go inside the shoulder cape part to fill up that little hole, by spinning it around on the thing it attatches on?
i think you do, but...

Yeah, sorry, I should’ve specified

Still, it allows you not to have it just sitting next to the figure on your shelf

no worries mate
(btw, no offense but i think that's pretty common knowledge by now anyway.

That doesn't matter. This is a thread about what people haven't noticed. Having said that, I just realised that he said he only just bought the figure so he shouldn't have posted it!

I did what to the who now?

Okay I'm sorry if that is common know-how

Mykl's saying that this thread is for figures that you've had for a long time and you never realised something rather than new figures that you're still fiddling with.

Yeah but just this once we'll let it go!

News Credits: 9 · by **Mykltron** » Wed Aug 03, 2011 6:11 pm

--B-- wrote:If you leave 20th Anniversary MP Optimus Prime in truck mode for too long, there is a small spot in where the face mask touches. If you let it sit for a while like mine has, it will LEAVE A BIG FREAKING CUT IN THE MIDDLE OF THE MASK!!! FFFFFffffffffff.

I don't understand. I just transformed him and I can't see what would cause a problem.

by **MINDVVIPE** » Wed Aug 10, 2011 7:13 pm

uhm, not really anything new as such, but regarding the new Generations Perceptor figure, I just noticed where the inspiration for it came from, and, why they sort of designed microscope parts like the chest into the figure.
http://img.photobucket.com/albums/v207/IIInunny/perceptor.jpg

by **Doubledealer93** » Wed Aug 10, 2011 7:23 pm

MINDVVIPE wrote:uhm, not really anything new as such, but regarding the new Generations Perceptor figure, I just noticed where the inspiration for it came from, and, why they sort of designed microscope parts like the chest into the figure.
http://img.photobucket.com/albums/v207/IIInunny/perceptor.jpg

i never noticed that! :shock:

nice find

by **MINDVVIPE** » Wed Aug 10, 2011 7:28 pm

Doubledealer93 wrote:
MINDVVIPE wrote:uhm, not really anything new as such, but regarding the new Generations Perceptor figure, I just noticed where the inspiration for it came from, and, why they sort of designed microscope parts like the chest into the figure.
http://img.photobucket.com/albums/v207/IIInunny/perceptor.jpg

i never noticed that! nice find

Thanks!

Although I feel a little silly now that I see its already been documented on the tfwiki

BUT I NEVER READ THAT BEFORE SO HAH

by **Doubledealer93** » Wed Aug 10, 2011 7:36 pm

MINDVVIPE wrote:
Doubledealer93 wrote:
MINDVVIPE wrote:uhm, not really anything new as such, but regarding the new Generations Perceptor figure, I just noticed where the inspiration for it came from, and, why they sort of designed microscope parts like the chest into the figure.
http://img.photobucket.com/albums/v207/IIInunny/perceptor.jpg

i never noticed that! nice find

Thanks!
Although I feel a little silly now that I see its already been documented on the tfwiki

BUT I NEVER READ THAT BEFORE SO HAH

all the more reason why i love animated

News Credits: 3 · by **NatsumeRyu** » Mon Aug 15, 2011 9:34 pm

Aww, man and here I was thinking it was AHM inspired, lol. Makes a bit more factual sense this way though. hee hee. Speaking of which, I want one o' these Percy's now that I've finally gotten all of AHM. I want him so very much. Hopefully next botcon....

by **BOBZILLA** » Mon Aug 15, 2011 9:57 pm

I found a youtube video of how to combine the Arcee sisters, and it seems that how it was done was probably Hasbro's idea of how to combine them. They probably never showed how to combine them because they never did it in the actual film, but they prepared because they were supposed to combine. With my Kreo Megatron, I put the missle on the wrong side of the missle launcher thing, and found out it was the other side. I wonder why I never saw the one side of the launcher, probably was russhing building the figure. Hasbro has some marketing issues apparently, they probably don't tell you some things for the figures so that you can discover them yourselves.

by **STINGRAY749** » Mon Aug 15, 2011 11:02 pm

Can you post a link to the video please.

by **Godzillabot Primal** » Mon Aug 15, 2011 11:31 pm

ROTF Brawn or RTS Fallback can store his little pistols on his back (if you look there should be a pair of grooves and the little bars on the top of the guns slot into them)

News Credits: 4 · by **Slashercon** » Tue Aug 16, 2011 12:58 am

godzillabot wrote:ROTF Brawn or RTS Fallback can store his little pistols on his back (if you look there should be a pair of grooves and the little bars on the top of the guns slot into them)

You are the only other person I know to have done this. I've been doing it for sometime now.

by **ShadowTracker** » Tue Aug 16, 2011 1:27 am

wow this place just changed the way i see at least ten of my transformers

by **MINDVVIPE** » Tue Aug 16, 2011 1:37 am

Slashercon wrote:
godzillabot wrote:ROTF Brawn or RTS Fallback can store his little pistols on his back (if you look there should be a pair of grooves and the little bars on the top of the guns slot into them)

You are the only other person I know to have done this. I've been doing it for sometime now.

I've been doing it too, so

!

Actually, I read it in a review around the time I got the figure, so... good job if you found it yourself.

News Credits: 4 · by **Slashercon** » Tue Aug 16, 2011 2:28 am

SKYWARPED_128 wrote:I didn't realize you can flip out WFC OP's "knee pads" to form his tail lights in alt mode, until I saw a pic of his alt mode's back view in a CDX review. The instructions didn't even mention that, and the pic in Seibertron gallery also didn't show it with the kneed pads flipped up.

Holy energon cubes mon, I just found that out. Thank you for posting this.