The Energon Pub

News Credits: 5 · by **--B--** » Thu Jul 23, 2009 8:44 am

At least this mold would fit in better with the Alternators line, MP Prime standing next to most alternators is just too tall to look right.

News Credits: 3 · by **metaphorge** » Thu Jul 23, 2009 8:15 pm

Bring it on, I wish Takara would crank an MP Prime out in this size. I hope that this is not too hard to get and the plastic is okay.

I'd also like to see a shot at a smaller MP Megatron, though I'm not holding my breath for that. I like Henkei Megatron a fair amount, but I'd like something that looks a bit more G1-ish; the 'wings' throw his appearance off.

News Credits: 23 · by **ZenPrime** » Fri Jul 24, 2009 1:36 am

Does anyone foresee Hasbro-TakaraTommy going after them for this figure? It's a direct KO, even if it's a smaller size. Altho that doesn't mean that I won't get it if it ever gets released.

by **Malicron** » Sat Jul 25, 2009 8:32 pm

If I'm reading the ACToys posts correctly (which I may not be, Google Translate sucks) this is fan made, and the fan is waiting for input on what accessories the figure should come with to release this thing. Yes, they do appear to be planing on selling these. Let's hope they can make a few before Hasbro/Takara's lawyers can get them.

News Credits: 2 · by **Convotron** » Sun Jul 26, 2009 2:24 am

I love the MP Optimus Prime mold even at a smaller scale so if this is produced for sale, I'll pick one up.

by **DoubleOScorpio** » Sun Jul 26, 2009 6:09 am

I too would love to get my hands on this. Whether its released by Hasbro/TakTomy or is a fan project - I don't care, so long as the quality is there and the price is justifiable.

by **SentinelA** » Sun Jul 26, 2009 12:02 pm

Oh please make it so, Pleeeeeeeeeease!

by **SentinelA** » Sun Jul 26, 2009 12:04 pm

metaphorge wrote:Bring it on, I wish Takara would crank an MP Prime out in this size. I hope that this is not too hard to get and the plastic is okay.

I'd also like to see a shot at a smaller MP Megatron, though I'm not holding my breath for that. I like Henkei Megatron a fair amount, but I'd like something that looks a bit more G1-ish; the 'wings' throw his appearance off.

Agreed!, That's why I want this PRIME cause it's more G1ish than the Classics/Henkei

by **SentinelA** » Sun Jul 26, 2009 12:05 pm

--B-- wrote:At least this mold would fit in better with the Alternators line, MP Prime standing next to most alternators is just too tall to look right.

I kinda disagree. Considering that he's a big O truck I think he's the perfect scale.

My hope is for this mold to go along with the regular G1 or Classics scale.

News Credits: 5 · by **skywarp-2** » Sun Jul 26, 2009 3:26 pm

so what does this do for classics prime or Henkei prime's figure?? Does this render his mold obsolete? I for one have now become accustomed to the Henkei Prime.. though I love the MP version..this mini MP could be the original prime in my collection and then in my own universe continuity, he upgrades into the henkei prime mold..

like as if the events of the 1986 movie didn't happen..Megatron could have upgraded to the Henkei gun style as well... and be a futuristic version..hmm this could work..

News Credits: 905 · by **Mach** » Sat Aug 01, 2009 12:55 pm

According to the creator in an interview, mini mp prime is in the midst of mold opening. The mold is ready in October 2009.

Currently the creator is also working on miniture MP Megatron with 1:1 scale real gun size.

by **Malicron** » Sat Aug 01, 2009 12:58 pm

Any info on price? :PRAY:

News Credits: 905 · by **Mach** » Sat Aug 01, 2009 1:02 pm

[list=][/list]

Malicron wrote:Any info on price?

not yet. According to him price depends on demand, as long as he amortize the mold.

News Credits: 767 · by **Dead Metal** » Sat Aug 01, 2009 1:20 pm

Seibertron.com member Real Devastator has found new info regarding the custom made miniature Master Piece Optimus Prime figure we reported earlier.

The information he found is that the mold is currently being created and should see completion in mid October, the price is not yet known as it depends on the demand of the figure.
He also found out what the next project is for the person behind this and the Classics miniature Classics Optimus Prime molds: Master Piece -05 Megatron! This is supposedly going to be in 1:1 scale with the actual Walter P.38!
No new pictures have been given out yet.

Stay tuned to seibertron.com for all your Transformers related news!

News Credits: 8 · by **Megatron Wolf** » Sat Aug 01, 2009 2:29 pm

Screw Prime give me Megatron

News Credits: 8 · by **Forgotten** » Sat Aug 01, 2009 2:46 pm

If they make the Megatron and it's good quality and less than I paid for my full size MP-05 then i'm on it like white on rice on a paper plate in the middle of a snowstorm. :grin:

but as far as the Optimus is concerned, I have MP-01 and I honestly don't care for it(of course i'm not a Prime collector. so this is an easy pass.

News Credits: 1014 · by **First Gen** » Sat Aug 01, 2009 3:27 pm

Looks like I'm gonna be one of those guys that spends a ridonkulous amount of money on these as I can't get enough of my Prime and don't have Megs yet.

But to put these too at the forfront of my Classic line will ROCK!!!!

News Credits: 9 · by **Zeds** » Sat Aug 01, 2009 7:18 pm

He also found out what the next project is for the person behind this and the Classics miniature Classics Optimus Prime molds: Master Piece -05 Megatron! This is supposedly going to be in 1:1 scale with the actual Walter P.38!

Customs will just love this! NOT! Love that last pic of MP-01 (mini-me) with MP-08 Grimmie.

News Credits: 668 · by **Autobot032** » Sat Aug 01, 2009 9:43 pm

Dead Metal wrote:Master Piece -05 Megatron! This is supposedly going to be in 1:1 scale with the actual Walter P.38!

O_o... oooh. Uh. That's probably not a great idea. It was bad enough getting Masterpiece Megatron, for some folks, and his excessive size was one of the things that helped keep him from crossing the line.

A 1:1 Megatron with the real deal? Eh...heh.

Great for those collectors wanting an easier to handle Megatron, figure variances, etc, though.

News Credits: 905 · by **Mach** » Sat Aug 01, 2009 10:11 pm

There are some new images of mini prime added in: http://www.actoys.net/bbs/read.php?tid-380335.html

click the link if u wish to see more

News Credits: 1 · by **Solrac333** » Sat Aug 01, 2009 11:15 pm

I want this! And Megatron!!! :grin:

by **Soundwave__Superior** » Sun Aug 02, 2009 9:33 am

Must have- the only reason I don't buy masterpeice is the price and size of the figures. Definately getting Prime and Megatron, if they make seekers, probably not, I don't like the way the MP seekers look. Takara needs to make Masterpeice Soundwave so these guys can tinyfy it. And the fact Megatron being real gun size....freakin mazing, but is no doubt all hell will break loose shipping this guy.

News Credits: 4 · by **Firebird** » Sun Aug 02, 2009 9:47 am

I'm not going to replace the classics prime in my neo G1 (I really like how that sounds) collection. But if this is affordable I will probably pick it up.

I wonder if the fans project G3 trailer is in scale with this mini MP-1?

News Credits: 1 · by **rpetras** » Sun Aug 02, 2009 6:11 pm

If they are trying to asses demand, put me down for 3, a red (Optimus) a white (Magnus) and a black (Nemesis).

News Credits: 2 · by **Convotron** » Sun Aug 02, 2009 6:20 pm

rpetras wrote:If they are trying to asses demand, put me down for 3, a red (Optimus) a white (Magnus) and a black (Nemesis).

Put 3 more down for me, hehe.

I'd love a well done Black Convoy/Scourge in RiD colours: Black, silver/chrome, teal, and red for transparent plastic(glass) parts.