The Energon Pub

News Credits: 101 · by **-Kanrabat-** » Thu Jun 17, 2021 6:32 pm

Galvatron will come out in a zillion years in Canada.
Maybe the issue will be fixed?

News Credits: 23 · by **aronjlove** » Thu Jun 17, 2021 6:38 pm

chuckdawg1999 wrote:Is there any way to fix the arms on Galvatron just by rotating the joint around and swiveling the bicep? Do the "unfixed" arms affect transformation?

I haven't even transformed him yet but since all we are doing is flipping that shoulder piece, you can do exactly what you say but then the pin-hole shows. So it depends on how much that will bother you. Someone is gonna make an add-on that is nothing but covers for those pin-holes, they gonna make a lotta money.

News Credits: 10 · by **sol magnus** » Thu Jun 17, 2021 7:29 pm

aronjlove wrote:
sol magnus wrote:
TF-fan kev777 wrote:
sol magnus wrote:
aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.

There's a post on a good fix, a couple pages back.

I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.

I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.
20210617_145329.jpg

One misaligned is worse than both misaligned. It looks...bad.

News Credits: 23 · by **aronjlove** » Thu Jun 17, 2021 8:00 pm

He got his shoulders fixed and now he's off to kill some Autobot scum. The guns slash spaceships can be stored on his back.

News Credits: 42 · by **TF-fan kev777** » Thu Jun 17, 2021 9:48 pm

Weird, so my local Target, which is smaller and usually very late to receive product on the last 3 Thursdays received a case of wave 1 voyagers, then wave 2, and today wave 3 along with a case of wave 3 leaders. After being empty for easily a month. Distribution is still all over the place, but maybe getting better?

In any case, I snagged a Rhinox and Galvatron that my wife will have my kids wrap for me for Sunday, so they can mock and torture me for a couple days before I can enjoy them.

I'm leaning towards doing the shoulder fix. Has anyone who has done it replaced the pins with screws? And if so, what size screws did you use?

News Credits: 388 · by **Bounti76** » Thu Jun 17, 2021 11:59 pm

Thanks to Seibertronian Mindmaster for pointing us to the Twitter asco te of @morgan_dfx, who recently posted pictures of a possible Bumblebee Movie Thrust. This time, he's posted an in-box picture of the upcoming Kingdom Deluxe Class Red Alert!

From this picture, we can see that Red Alert will be based on the upcoming Amazon exclusive earth-mode Sideswipe. Like his regular mold mate, Red Alert will also be a store exclusive, to the Walgreens drugstore chain, at least in the U.S., like Siege Ratchet and Earthrise Bluestreak. It remains to be seen how his distribution outside the U.S. will he handled.

What do you think of this reveal? Excited to add another LamBro to your collection? Let us know your thoughts, and stay tuned to Seibertron for all the latest Transformers news!

News Credits: 22 · by **Rodimus Prime** » Fri Jun 18, 2021 12:50 am

He looks good, but for me it's the same as Sideswipe: the Siege version is good enough, the changes aren't big enough to warrant double-dipping. This mold really should have had the spoiler.

News Credits: 12 · by **Sentinel_Primal** » Fri Jun 18, 2021 1:47 am

Hopefully he'll be as easy as Ratchet and Wreck-Gar were to find for me cause I do enjoy Red Alert's color scheme the most out of all the Sideswipe repaints, plus I think this design will look closer to what I'm looking for in a Red Alert for my Lost Light shelf than Siege's due to the color changes and molding differences

News Credits: 1 · by **Gauntlet101010** » Fri Jun 18, 2021 7:33 am

While I didn't replace Universe Sideswipe or Sunstreaker, Red Alert was one I was looking to and the Siege version is just a tad too Cybertronian to do it for me. So count me in on this bandwagon.

I don't know why I like Universe RA less than his mold mates. I have a replacement head for him so it's not that. Hopefully this is easy to get.

News Credits: 10 · by **sol magnus** » Fri Jun 18, 2021 9:01 am

Getting him and all other Earth Mode Cybertronians. Bring on Hound.

by **M. Spector** » Fri Jun 18, 2021 9:21 am

Already owning Siege Sideswipe and Selects Cordon, my need for Contechs isn't terribly high, but I wouldn't be totally opposed to Red Alert if he looks good enough in the wild. It's just with the figures I already own feel like I have all the different aspects that figure hits ya know

And as a side note, pretty much all of the walgreens exclusives have shown up here in the far north, the only one that hasn't isnt even a TF but a Silver Surfer Marvel Legends figure from a year or so ago

News Credits: 65 · by **Wolfman Jake** » Fri Jun 18, 2021 9:27 am

Well, Red Alert looks good, but not very screen (or toy) accurate. I’m not going to fuss about the lack of wheels on the outsides of the shoulders and such, but the color layout could have been better. The shoulders should be black, the forearms and thighs should be white. The red thighs are correct for the original toy, but the helmet is red, like the cartoon, so I think screen accuracy should have been the priority. If it were only the thighs that were red, I could probably write that off as an amalgamation of the cartoon and toy looks, but the arms are just all wrong (except for the red biceps). The missile is at least red, but the shoulder cannon should be white or silver. Black for the cannon is, again, accurate to the G1 toy, but again, with the cartoon accurate head, why not match the cartoon coloring too? I can easily swap out an extra silver-painted cannon to correct that. I might even do the same with the arms, using the Siege release, which are identical parts structurally. They can be disassembled at the bicep swivel cut joint. That won’t fix the shoulders, but it will fix the forearms. However, I’d be sacrificing the actually accurate red biceps. The thighs are unfixable through kitbashing due to all the pins used in the leg assemblies. Kingdom Mirage is a big let down. Sideswipe is nearly perfect. Red Alert falls somewhere in the middle for me.

I think Hasbro and Takara must have used the original MP-14 release of Red Alert, not the “anime colors” MP-14+ version, as their color guide for the Kingdom figure.

News Credits: 56 · by **o.supreme** » Fri Jun 18, 2021 9:40 am

The toy looks cool. Every time I see it however, I feel compelled to ask my friend that works for the Sac Metro FD, when his fire chief is getting a Lamborghini

.

by **LunarBolt1984** » Fri Jun 18, 2021 10:27 am

For all you Canadians out there, I got my Earthrise Bluestreak through EB Games. Once this toy figure either gets officially released by HasTak or just plain starts showing up in the US, I would start calling the nearest EB Games to see if you can pre-order it. If the staff is nice and they happen to have it in-store, they'll probably hold for you, just give them a call.

On another note, i never got SEIGE Red Alert, or Netflix Red Alert, so I'm gonna try and pick up this guy, even if I passed up on Inferno (already had Grapple). I was perfectly fine with the SEIGE Lambo mold, which is why I have both Sideswipe and Deep Cover, but I'll bite on this one if it becomes available here in Canada. Earth-mode is a decent enough slight retool to not make me think its HasTak laziness, so Red Alert will look fine with my other two Lambros.

News Credits: 1 · by **Autobot_Benz** » Fri Jun 18, 2021 10:52 am

Emgo reviewed Rhinox last night

https://www.youtube.com/watch?v=z4hr8r6Nivk

I am sticking with my Thrilling 30's one

by **Sculyblast** » Fri Jun 18, 2021 11:47 am

I'm intrigued by the idea that I would only need to remove one pin to retool Rhinox into a hippo alt-mode.

I've always wanted a hippo brother for rhinox.

News Credits: 12 · by **Razorbeast88** » Fri Jun 18, 2021 11:52 am

Sculyblast wrote:I'm intrigued by the idea that I would only need to remove one pin to retool Rhinox into a hippo alt-mode.

I've always wanted a hippo brother for rhinox.

Big fan of your thought process
We need a hippo alt mode already! Those things are dangerous af
Hip hop anonymous

News Credits: 19 · by **blackeyedprime** » Fri Jun 18, 2021 11:57 am

As much as I dislike Siege Red Alert its not worth the hassle or [rice to track this down with out it having the effort put into it. On the very slim chance that I find it rally cheap then its a maybe just so that I dont have to keep hiding red alert behind other figures.

News Credits: 11 · by **Overcracker** » Fri Jun 18, 2021 12:59 pm

Loving that Red Alert. Hopefully non-US Amazon can get it.

Otherwise, its off to BBTS or TFsource and a steep markup. #-o

News Credits: 65 · by **Wolfman Jake** » Fri Jun 18, 2021 1:51 pm

Is Galvatron’s wave mate Ultra Magnus?

News Credits: 56 · by **o.supreme** » Fri Jun 18, 2021 2:14 pm

Wolfman Jake wrote:Is Galvatron’s wave mate Ultra Magnus?

I think so...If that is the case, then the Magnus I saw earlier this week at Target (the first leader in months), means I just missed Galvatron...go figure...

News Credits: 42 · by **TF-fan kev777** » Fri Jun 18, 2021 6:03 pm

o.supreme wrote:
Wolfman Jake wrote:Is Galvatron’s wave mate Ultra Magnus?

I think so...If that is the case, then the Magnus I saw earlier this week at Target (the first leader in months), means I just missed Galvatron...go figure...

Yes he is, based on the 2 that were on the shelf when I found my Galvatron Thursday. That shelf was empty for a month.

News Credits: 23 · by **aronjlove** » Fri Jun 18, 2021 10:37 pm

As Galvatron is starting to be found in the wild, I'd like to point out that the 'shoulder fix' is truly optional as it is purely cosmetic and does not change the function of the figure or the transformation. Furthermore, with the way the arms become the tank treads, the fix doesn't even affect them.

News Credits: 22 · by **Rodimus Prime** » Fri Jun 18, 2021 10:41 pm

TF-fan kev777 wrote:
o.supreme wrote:
Wolfman Jake wrote:Is Galvatron’s wave mate Ultra Magnus?

I think so...If that is the case, then the Magnus I saw earlier this week at Target (the first leader in months), means I just missed Galvatron...go figure...

Yes he is, based on the 2 that were on the shelf when I found my Galvatron Thursday. That shelf was empty for a month.

Mine has been empty for 3 months or more. But tonight I stopped in after work and lo and behold there were 3 Magni and 2 Galvatrons, with the bad shoulders (pins in the back?). I'm still not sold on Galvatron, but he looked better in hand than in photos. The crap on the chest still bothers me.

And I noticed the Commander Class slot on the shelf, so I asked the guy to scan it for me for a possible arrival date of the product. He said that the CC is being discontinued in the store, but I can get it online. I'm not sure if this is just regional or company-wide. My Wal-Mart did away with the CC slot after Jetfire, but I got Sky-Lynx at Target. Looks like Rodimus will be an online purchase, if I can get a deal for him.

by **ZeldaTheSwordsman** » Sat Jun 19, 2021 5:25 am

So, I just learned that the email from Hasbro that initially reassured me about Rodimus Prime's height... was misrepresenting him. The 7.5" figure they gave me was measured from the bloody spoiler and his actual bodily height is only 6.5".

So every last bit of that premium engineering, all those features... All wasted because he's too short. He needed to be on par with Galvatron height-wise. No ifs, ands, or buts. The climactic throwdown scene makes that an absolute necessity, and they blew it. Even with as good as every last other aspect about him is, the height was make-or-break.

And it turns out, the answer was break.

I was so looking forward to him... I hadn't been that hyped for a Transformer in ages... But now because they screwed up that one single but oh-so-important thing....
I'm rather frustrated and bummed.... HasTak are unlikely to correct their obscene design failure at this point, and given how halfassed so many 3P upgrade kits are I don't dare hope for any worthwhile help from that quarter either.

He was going to be so good... But this one thing...
I just don't know what to do now.