The Energon Pub

IncrediPlugs Presents: SweeperPlugs!

Sweeper Shoulder Joint

Sweeper Knee Connector

Sweeper Limb Binder


SweeperPLugs can be used with Gen Scourge, making it suitable to be used as limbs. However, Scourge figures are looser than standard figures that are designed to combine. So, the combiner is a bit fiddly, and unstable. However, you can see what is possible, given patience, and balancing it correctly. Of course available colors for the Sweeper plugs are blue, light silver, neon yellow, and black.



CLEAN SWEEP SET includes:

2 Sweeper Shoulder Joints, 2 Sweeper Knee Connectors, and 4 Sweep Limb binders


Price $30, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.

Please send your orders with your address, and color choice to scoffer75@gmail.com
**Once received, I will then send you the proper Paypal account to make payment to.


IncrediPlugs Presents: The BrutePlug!



BrutePlug can be used with FOC limbs. Of course available colors are blue, light silver, neon yellow, and black.



Set of 4 Brute plugs will be $20, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.

Please send your orders with your address, and color choice to scoffer75@gmail.com . I will then send you the proper Paypal account to make payment to.

IncrediPlugs Introduces***QuadPlay Ports!***

For use with the CW Motormaster / Ultra Prime mold



Simply fit the two above pieces around Motormasters thigh, and click them into place! You can then connect any CW limb into the provided port!



Price for a pair of left, and right ports is $10, plus $5.95 shipping in the U.S.
Note: For international orders, I will have to calculate shipping, and then send you an updated total cost.


Please send your orders to: scoffer75@gmail.com. I will then send you the separate paypal account identifier to send payment to.

You may also like...

***IncrediPlugs!***


Would you like more options for your CW main bodies to merge with? Many of us collectors still have good previous series of TFs that we have relagated to storage. Specifically, there are unused combiner limbs, and drones just sitting around going to waste. There is no need for this.



Introducing IncrediPlugs! The IncrediPlug will allow you the value added joy of new combination possibilities by merging current line figures with figures that you have already invested in. Additionally, the IncrediPlug also has a 5mm port that will allow you to attach some smaller robots as weapons.

Note: IncrediPlug Classic will allow a CW body to merge with EP drones, Wing Saber, as well as E combiner limbs. It has full swivel articulation for the shoulders, but in the case of the drones, and Wing Saber, will not bend at the knee. However, the new IncrediKnee will!

Current Version of IncrediPlug Classic:




And Now Introducing the IncrediKnee!

This special plug allow the Knees to bend when using Drones, and / or Wing Saber



Note: it is recommended that you get the IncrediHeel to correct for balance issues when using Wing Saber as limbs




Current available colors:

Silver, Blue, Black, or Neon Yellow



The prices are:

Classic Pack

Set of 4 IncrediPlug Classics = $25

---

Full Limb Pack

Set of 2 IncrediPlug Classics + 2 IncrediKnees = $32.50

---

Ballance Pack


Set of 2 IncrediPlug Classics + 2 IncrediKnees + 2 IncrediHeels = $40.50


If you wish to purchase single pieces, the prices are:


1 IncrediPlug Classic = $7.50

1 IncrediKnee = $12.50

1 IncrediHeel = $5.00


Shipping and handling on all continental U.S. non-large orders = $5.95 USPS
For very large, or international orders, the shipping cost will be more.

Additionally, I am offering a separate "Limb as Weapon" IncrediPlug (LaW-IncrediPlug) that will allow for Energon Combiner limbs to be attached as weapons when the blue sections of Wingsaber are in arm mode. (note: *Please do not use a normal version IncrediPlug in this way (backwards). They are not designed for it, and may get stuck!*)

These LaW-IncrediPlugs are $5 a piece.






Note, and Reasoning for Prices: It takes a fair amount of cost to get started with a 3D printer, and maintain equipment. Not only is there the cost of the ABS plastic (plus shipping), but the power it takes to heat the plastic to 240 C, and keep the motors spinning. For instance, it takes roughly 2 hours to print one complete knee joint, then there is the labor of cleaning off the support plastic attached, trimming, and sanding before assembly. There is also the cost of the specialty screws, and springs with their shipping, depending on the quantity that is ordered. Also, while it is enjoyable to learn, it takes a lot of research, measuring, trial, and error to get things exactly right with the 3D model, and how those measurements translate into the plastic that the printer prints. You have to learn what makes things weak, or strong in a print. Something that measures one way on the computer, may end up with a different dimension in the print. I have a lot of scrap plastic that tells the tale of this trial, and error testing, all the way up to the success of the released models. The original IncrediPlug Classic is likely underpriced, but I wanted to use is as a learning tool, and test, and I thank those who Beta tested for me. It is my pleasure to create, and bring you the products that you want, and I try to make prices fair.

-----

And here is Ultra Prime with all current IncrediPlug models.






Please send your questions, or orders to: scoffer75@gmail.com. I will then send you the separate paypal account identifier to send payment to. Of course, I will answer questions here also.

Thank You very much!

-----------------

The bellow photos are using an earlier version of the IncrediPlug without the 5 mm small robot port, but the CW to E functionality is the same. New orders will include the 5mm port on the normal IncrediPlug.

***When hooking 3rd Party TFC limbs to an IncrediPlug, use extra care. The ratcheting joints on my TFC Uranos are extremely tight, and will cause extra strain on the IncrediPlug, like if you are bending the TFC's knee joint.











Necessary legal disclaimer: This is an adult collectors item for ages 16, and up. It is not for children bellow that age. This seller is not liable for any damages to any possession of the buyer. By purchasing these items from this seller, the buyer agrees, and consents to total responsibility, and liability for the buyer's self, the buyer's possessions, anyone who the buyer allows access to the purchased piece, or pieces, or any possession of anyone the buyer allows access to the purchased piece, or pieces, should damage occur to any possession, or property due to the purchased item(s). Or, as with all things that you care about, be careful.

Bought 8 of these plugs and I have to say the quality is top notch and allowed me to connect Energon Prime drones to CW prime. Well worth it! You won't be disappointed by these.

predaking40 wrote:Bought 8 of these plugs and I have to say the quality is top notch and allowed me to connect Energon Prime drones to CW prime. Well worth it! You won't be disappointed by these.

Thanks predaking40! Glad you're still enjoying them!

Here's a battle mode pick (of course, I guess everything is battle mode.)

Thanks for making them. Gives these guys especially optimus alot more options now.

I'm thinking of a couple more options. I hope I get time to model them. Work has me pretty busy.

Latest Order! (family shot)

What a great idea! Prime looks a lot like Energon Optimus anyways in combined mode! =D

Thank you, SillySpringer! Prime got tired of sharing bots with Silverbolt. So, something had to be done. It does give Prime (and any CW combiner body) more options. Plus, you get to re-discover previous generation TFs to get more value out of them. So, it is a win-win.

SkyQuake101 wrote:Thank you, SillySpringer! Prime got tired of sharing bots with Silverbolt. So, something had to be done. It does give Prime (and any CW combiner body) more options. Plus, you get to re-discover previous generation TFs to get more value out of them. So, it is a win-win.

Sure! People where making the comparisons anyways! Keep up the good work!

First post updated!

SkyQuake101 wrote:First post updated!

Lol XD

Btw I'm working on designing a custom CW Motormaster torso. XD https://www.tinkercad.com/things/igm83R ... hicle-mode My favorite part is probably the head-sculpt, which took me hours to do!

Looks pretty cool! Keep me posted.

SkyQuake101 wrote:Looks pretty cool! Keep me posted.

Thanks! Btw I have CW Dragstrip, so I used that to measure the combiner port, but I'm not sure if I measured it 100% accurately, so do you have the measurements that you used for these plugs still? It would be helpful!

Hi SillySpringer. Sorry, I can't give out measurements, or model files (someone actually asked for model files) at this time. The reason is that I put a lot of time, effort, and investment into getting things right, and I need to recoupe that investment, but I do appreciate your interest.

SKyquake 101 , Ive been trying to reach you via the email address provided . I am ready to place an order for a complete set of your amazing "sweeper plugs" Are you still making them ? Waiting to hear back from you to place my order !