The Energon Pub

News Credits: 5 · Thu Aug 27, 2009 11:08 pm

The iGear IG-TF005 Shark Sentry is up for preorder at Seibertron sponsor robotkingdom.com for $59.90 and is due out in October. Check it out here:
http://www.robotkingdom.com/services/eshop/main.php?action=details&CatType=Category&II=IGTF005&lang=us&CatID=55_17

News Credits: 402 · Updated Oct 21, 2022

60 for a single Sharkticon that's not really all that articulated? No thank you.

EDIT: Ok, so you get three figures instead of just one. I might consider this and leave them in shark mode.

News Credits: 2 · Thu Aug 27, 2009 11:58 pm

Nifty looking figure but somewhat overpriced considering the limited articulation. However, it does look good and I like the details.

Fri Aug 28, 2009 12:01 am

this figure looks good. really good actualy. i payed 60 for an energeon sword I might as well get this too. Consider it bought

News Credits: 402 · Updated Oct 21, 2022

Convotron wrote:Nifty looking figure but somewhat overpriced considering the limited articulation. However, it does look good and I like the details.

well, if you break it down, that's about 20 bucks a fig, so the price isn't that bad actually.

News Credits: 2 · Fri Aug 28, 2009 12:58 am

Ohhhh, okay, it's a set of 3 figures. Big difference then. Actually, $60 is reasonable for 3 figures if the actual product is as good as it looks in the promo photos.

News Credits: 198 · Fri Aug 28, 2009 4:35 am

I guess I should have news'd this 3 weeks ago when they posted the preorder. I mentioned it in another thread and then just forgot about it-oops. It wasn't clear at the time that you got 3, which does seem a lot better for the price.

News Credits: 5 · Fri Aug 28, 2009 6:34 am

that's pretty cool, but I am hoping for Hasbro to do a newer classics style reimagined Sharkticon, and a Voyager or Leader sized Grimlock..

News Credits: 2 · Fri Aug 28, 2009 8:24 am

Don't get me wrong... I'm really excited about these guys, and would buy them in a flash, but I do have concerns about hasak bringing down the hammer on this project (and the mini-MP prime). They're not add-ons, or spin-offs. They're just miniature reproductins of existing molds.

That just made me think... Does anyone know who made the "world's smallest" line?
Was that something OK'd by hastak?

News Credits: 2 · Fri Aug 28, 2009 8:52 am

I believe Justitoys makes the WST Dinobots. I'm not sure if they're licensed to make the WST Dinobots. They also make the Hybrid Style Convoy, Convoy Black Version, and Galaxy Convoy.

Honestly, I don't know if Has/Tak thinks it's worth the effort to bring their attention to Justitoys. The WST and Hybrid figures have been out for a while now without any problems that I know of.

News Credits: 4 · Fri Aug 28, 2009 9:02 am

Convotron wrote:I believe Justitoys makes the WST Dinobots. I'm not sure if they're licensed to make the WST Dinobots. They also make the Hybrid Style Convoy, Convoy Black Version, and Galaxy Convoy.

Honestly, I don't know if Has/Tak thinks it's worth the effort to bring their attention to Justitoys. The WST and Hybrid figures have been out for a while now without any problems that I know of.

The Hybrid series, if you're talking of what I'm thinking of, are from TakaraTomy, they're not from 3rd party companies:

http://www.takaratomy.co.jp/products/TF/products/hbs.html

The black Convoy isn't listed but it's also from them.

As for the WST dinobots I don't think they are licensed. They're not even sold by the name "Transformers" and they changed their names to "Dinorobots", "Jungle Warrior", etc.

[JRX] wrote:That just made me think... Does anyone know who made the "world's smallest" line?
Was that something OK'd by hastak?

The official WST line is from Takara, before merging with Tomy. But there were also KOs of those being made.

News Credits: 2 · Fri Aug 28, 2009 9:44 am

Convotron wrote:Honestly, I don't know if Has/Tak thinks it's worth the effort to bring their attention to Justitoys. The WST and Hybrid figures have been out for a while now without any problems that I know of.

Hopefully the same goes for their attention to iGear. It would make sense hastak considered themselves better off focusing on knocker-offers producing on a much larger scale.

capellamusic wrote:The official WST line is from Takara, before merging with Tomy. But there were also KOs of those being made.

Thanks!

News Credits: 2 · Fri Aug 28, 2009 9:46 am

My mistake! :oops:

I just remember coming across the justitoys website a while ago and seeing those two products there.

News Credits: 4 · Fri Aug 28, 2009 9:57 am

Convotron wrote:My mistake!
I just remember coming across the justitoys website a while ago and seeing those two products there.

Well, they (JustiToys) actually announced new figures in the hybrid style a few time ago, to complete the official Hybrid Style line. I think they were dinobots.

News Credits: 1 · Fri Aug 28, 2009 10:02 am

These are kind of cool, and 3 per set makes the price very reasonable, but they look really little.

skywarp-2 wrote:that's pretty cool, but I am hoping for Hasbro to do a newer classics style reimagined Sharkticon, and a Voyager or Leader sized Grimlock..

I'd dig a classics redux of a Sharkticon, and if these had decent articulation I'd be all over them.

There is a leader sized Grimlock, it's MP Grimlock :-)

But, yea, a real classics voyager Grimlock would be cool. I really like TFA Grimmy, but he doesn't fit in with classics.

News Credits: 2 · Fri Aug 28, 2009 11:05 am

capellamusic wrote:Well, they (JustiToys) actually announced new figures in the hybrid style a few time ago, to complete the official Hybrid Style line. I think they were dinobots.

Oh, I see. Good to know and very interesting.

A Voyager class G1 inspired Grimlock would be so cool and on my wish list.

News Credits: 1 · Fri Aug 28, 2009 11:15 am

If they were a little bit cheaper, it'd be intersting to buy a few packs and create a Sharkticon army that's similar to a Clone Army scale.

News Credits: 6 · Fri Aug 28, 2009 11:17 am

Even though it is a good deal I'm still unsure about iGear's products. Has anyone received the IG-TF002 or IG-TF003, if so what is the quality of their products?

News Credits: 5 · Fri Aug 28, 2009 11:47 am

rpetras wrote:These are kind of cool, and 3 per set makes the price very reasonable, but they look really little.

skywarp-2 wrote:that's pretty cool, but I am hoping for Hasbro to do a newer classics style reimagined Sharkticon, and a Voyager or Leader sized Grimlock..

I'd dig a classics redux of a Sharkticon, and if these had decent articulation I'd be all over them.

There is a leader sized Grimlock, it's MP Grimlock But, yea, a real classics voyager Grimlock would be cool. I really like TFA Grimmy, but he doesn't fit in with classics.

yeah maybe a leader sized version would be too large.. but Hasbro already has a Deluxe Grimlock.. and next to prime and other autobots Grimlock is pretty up there in terms of popularity..But their Deluxe Grimlock has a crappy set up and design.. with those feet that become his dino head, and then his legs were not very stable with his small thighs and longer lower legs..then you have the giant shoulders and bulky hands.. it's just funky looking..

So I can see Hasbro pulling off a Voyager release of Grimlock, (like they had the shotty Deluxe Classics prime and the exceptional Voyager Prime) so yeah maybe they make it similar to the original design..
Frenzyrumble's kit bash is a good example of how a New Voyager Grimlock should look..

This is how it should be redone..

then after that they should move back into doing a new redesign classics version of the Sharkticons, and yeah like you said rpetras, they should make them with good articulation..

But on these mini versions of the fat little G-1 sharkticons.. I'm gonna pass..

News Credits: 402 · Updated Oct 21, 2022

Let's continue the talk about Classics Grimlock in a new thread please.

Sun Aug 30, 2009 2:38 pm

$60! I could probably get a real Sharkicon for that much!

News Credits: 1 · Sun Aug 30, 2009 11:37 pm

SentinelA wrote:$60! I could probably get a real Sharkicon for that much!

Maybe an incomplete one. He's actually on the rare side.

$60 is pretty tempting. But, with the trailers just coming out, their timing SUCKS.

News Credits: 2 · Mon Aug 31, 2009 10:19 am

Gauntlet101010 wrote:
SentinelA wrote:$60! I could probably get a real Sharkicon for that much!

Maybe an incomplete one. He's actually on the rare side.

Right... and you're not gonna get three for $60!
That's the real selling point for me.