The Energon Pub

Tue Dec 16, 2008 8:00 am

Did anyone else notice his re-molded hands?
Huge improvement over Silverbolt's flat hands,

I'm Sold!

Tue Dec 16, 2008 8:07 am

Damn. this looks amazing!

News Credits: 9 · Tue Dec 16, 2008 8:11 am

Oilspill wrote:Hmm.. while I'd love to bolster my Decepticon ranks, I think he's just going to look to similar to Silverbolt to justify.

The head is a fairly good match, but I'd have preferred if it looked more like this:

Or this:

I couldn't see the 2nd image, but the first looks good...
I wish there was a different color used for the visor.
Something to make it "pop" like that red would've been awesome.
Suppose that wouldn't be too difficult to paint.
I've passed on Silverbolt so far, but I may have to get this.

News Credits: 5 · Tue Dec 16, 2008 8:23 am

First one I see is mine!

News Credits: 49 · Tue Dec 16, 2008 8:45 am

Not a bad resemblence, considering how they messed up homages to Powerglide, Dropshot, Overload and Crushbull by getting the colors all wrong.

News Credits: 1082 · Tue Dec 16, 2008 8:56 am

I'm on board. I really like this repaint in the figure is absolutely awesome! Yes, it is.

Tue Dec 16, 2008 9:29 am

I am quite surprised on how well this works as a repaint! My hand is now forced to hand over the rediculous amount for the 07 botcon set. Yeah right and maybe monkeys will fly out of my butt!

Tue Dec 16, 2008 9:39 am

He'll look great next to my BotCon Dreadwind.

News Credits: 5 · Tue Dec 16, 2008 9:57 am

Ultra Maverick wrote:Did anyone else notice his re-molded hands?
Huge improvement over Silverbolt's flat hands,

I'm Sold!

I've got my Silverbolt here and his hands look exactly the same as Darkwing's.. unless I'm missing something...

Anyway, I can see myself caving when I see him at retail and hoping someone makes a custom upgrade set with a new head and weapon.

News Credits: 3645 · Tue Dec 16, 2008 10:06 am

I love all of the later era G1 homages we've been getting the last couple of years. Personally, I've been getting a little burned out on homages of the 84 and 85 lines. It's nice to see Targetmaster Cyclonus, Dreadwind, Darkwing and some Micromasters getting some love lately. I think this is a perfect repaint. It makes me want to get my Dreadwind and Darkwing galleries back up on the site (they've been missing since the site crash in September). Kudos to the designers for this one

Tue Dec 16, 2008 10:36 am

i love hardhead, and i think an onslaught repaint would be cool. Dont remember Darkwing, but having seen some of the pics its a damn good figure, however its just too similar to silverbolt for me, they should and couldve chagned the gun and head at least

Tue Dec 16, 2008 11:14 am

i think hardhead would be kool but they'd have to remold the head, a go one step further and turn him into a head master

as for this, its pretty kool actaully
a little more red would be nice, then again some red would be nice
i havn;t picked up silverbolt yet so darkwing will prob be first, now i just need his botcon parter GRR

News Credits: 5 · Tue Dec 16, 2008 11:22 am

Here's an idea for making Dreadwing. I think it looks pretty awesome from the top, though the other angles suck a bit.

And no, Blitzwing is not being a dirty Decepticon, he's just helping hold Silverbolt in place.

So maybe some third party groups like the guys who did City Commander or Cliffjumper could do a Darkwing upgrade with new head and weapon and some way of getting him to attach to Dreadwind.

Pretty please?!

If anyone has the skills to digi-bash Silverbolt into Darkwing then please do. You can grab higher resolution photos here: http://www.flickr.com/photos/ironhide1984/

News Credits: 11 · Tue Dec 16, 2008 12:40 pm

Wow, it looks so oldskool, I like it!

Actually kind of looks better than the original colors for this mold... still, I'll pass since I have no attachment to the character.

Tue Dec 16, 2008 12:47 pm

That looks cool.

News Credits: 1 · Tue Dec 16, 2008 12:57 pm

I haven't opened my Silverbolt yet so I don't know if I like his toys at all but I will say I love the paint scheme. Perfect for some new Decepticons. I love it.

Tue Dec 16, 2008 1:27 pm

I do have to agree with the other comments made earier about having a new head and gun. Darkwing needs his twin guns and a visor! Funny thing though is that Jetfires gun is almost a perfect match besides being a little undersized. I would like to see Fansproject or whoever to come out with an upgrade. It was funny too because just last week I was telling myself there was no way Silverbolt could be repainted. Oh and after looking at hardhead it seems almost garanteed that Onslaught will be repainted as him, but would definatly need a remolded head. Botcon maybe???

Tue Dec 16, 2008 3:40 pm

LOOKS NICE BUT THEY SHOULD HAVE CHANGED THE HEAD AND LEFT OUT THE YELLOW ON THE WINGS IN JET MODE. OTHER THAN THAT ITS PRETTY DOPE !!!

Tue Dec 16, 2008 3:41 pm

Kryptikore wrote:I do have to agree with the other comments made earier about having a new head and gun. Darkwing needs his twin guns and a visor! Funny thing though is that Jetfires gun is almost a perfect match besides being a little undersized. I would like to see Fansproject or whoever to come out with an upgrade. It was funny too because just last week I was telling myself there was no way Silverbolt could be repainted. Oh and after looking at hardhead it seems almost garanteed that Onslaught will be repainted as him, but would definatly need a remolded head. Botcon maybe???

best not be a botcon. I love the guy but i can never justify the prices the botcon things go for. As for jetfires gun, i have the two standing next to each other and with a slight adjustment that might just work

Tue Dec 16, 2008 5:01 pm

Holy shat, that thing is so mine.

News Credits: 1 · Tue Dec 16, 2008 5:11 pm

I MIGHT get him, but there are too many new molds, I don't want to start with the repaints yet. Unless I don't have the original

News Credits: 1 · Tue Dec 16, 2008 5:47 pm

pass

Tue Dec 16, 2008 5:56 pm

Very nice. Speaking of Hardhead, I saw a nice digibash of Silverbolt as Brainstorm on another site recently. If they want to use this mold again, they should definitely go with that.

Personally, rather then Onslaught for Hardhead, I'd be more inclined to use Movie Wreckage or Classics 2-pack Megatron for Hardhead though I wouldn't mind Wreckage for Bludgeon.

In fact keeping with the Headmasters, yesterday I thought Energon Ultra Magnus might make an interesting Fortress Maximus or remold Movie Incinerator's head and give us Earthmode Highbrow.

Again, it's nice to see later G1 TF's getting homaged.

A few I'd love to see, yes I'm going to say it, include Energon Divebomb as Banzai-tron

Armada Skywarp as Skyfall

Classics Gun Megatron as Treadshot

Clocker as Hot Rod

and if the mold were still available, G2 Jetstorm as Joyride though the Euro version is similar in colour already and an Autobot.

Finally, I second Powerglide being repainted as Tailwind since according to the Cybertronian Guidebooks, the originals were meant to be the same type of plane.

Plus, Tailwind always reminded me of the Cobra Rattler so he'd go well with Energon Snowcat.

Once again, really like Darkwing. Looks like I'll be getting the Dukes of Depression at some stage.

News Credits: 2 · Tue Dec 16, 2008 9:17 pm

Well after seeing this repaint of Silverbolt, this guy is really cool and after reading his background, like him even better! Those who dont know click here: http://transformers.wikia.com/wiki/Darkwing
Now, I love the color schemes for this guy, and now i need a release data and a price? anyone anyone??? then after that, he needs a head and weapon upgrade for sure. And i feel the pain, with everyone why they dont like Silverbolt, not much there, the transformation is so easy and blind chimp can do it and the colors are not to G1 homeage. But all and all, his not that bad, when he's free like my was! at least give Silverbolt some slack, he's the leader of the aerialbots!!