The Energon Pub

by **Deathknell** » Sat Apr 07, 2007 9:10 pm

OK...I'm gonna give this a shot.
The plan is:
Classics Bumblebee

Will become HOS Bumblebee

These are the parts I'm using so far...with alot of Sheet styrene of course.

This is what I did today...I guess I'm gonna knock the easy stuff out first! I soaked his head in a mix of 1 part pine cleaner to 8 or 9 parts water to strip the paint. That took about 12 hours or so. Once cleaned I used a tiny rod of styrene to make the rivets. I still have more to do but I think it's nice so far.

by **jimsloth** » Sat Apr 07, 2007 10:11 pm

that does look cool. Just checking on durability, you did drill small holes for each rivet, right? If you didn't, it will be much easier for them to break off, but if you just drill a tiny depth with the same gauge bit as the styrene, then glue the styrene in the hole instead of just on the surface, it will make it ten times stronger.

by **Deathknell** » Sat Apr 07, 2007 10:34 pm

Yes indeed I did...well actually I had to use a small needle. Didn't have a small enough bit. The needle worked just fine though. Went alot quicker than I had planned. I still need to trim a few down. They are soooo tiny it was hard to get them trimmed down to all the same length. Again, I still got work to do.

Thanx for the input!

by **Autobot Shade 0066** » Sat Apr 07, 2007 11:46 pm

That is going to look so sweet when its done. I cant wait.

by **DTM** » Sun Apr 08, 2007 9:23 am

That head is very detailed. If I was making that I would be to lazy to make those rivets :lol:

, it's just the way I am

by **AndreyOfDoom** » Sun Apr 08, 2007 11:42 am

What is Hearts Of Steel?

by **Deathknell** » Sun Apr 08, 2007 1:10 pm

Hearts of Steal is a...kinda good...what if Transformer title from IDW Comics. What if Transformers woke up during the Industrial Revolution. Story kinda lacks but the bots are cool!

OK...His head is finished!!

Duh! Yeah his face is supposed to be silver. I fixed it. Don't know what I was thinking.

Now for the hard bits :lol:

by **AndreyOfDoom** » Sun Apr 08, 2007 5:04 pm

oh so its kinda like war within which focuses on cybertronian forms. This focuses on the industrial revolution. Good job on the head so far.

by **DTM** » Sun Apr 08, 2007 5:56 pm

Yup they are like trains, old styled planes, and stuff like that. I never read the comic yet, just like looking at the pics

Deathknell that head is awesome. This guys is going to turn out great

by **Deathknell** » Sun Apr 08, 2007 9:36 pm

Repainted his face silver...

by **Megas1** » Mon Apr 09, 2007 6:16 am

that paint job is fabulous cant wait to see how this one turns out

News Credits: 2 · by **grimlockprime108** » Mon Apr 09, 2007 7:01 am

loving it

by **Autobot Shade 0066** » Mon Apr 09, 2007 4:16 pm

Awesome

by **Ramrider** » Mon Apr 09, 2007 7:13 pm

Brilliant job on the head, DK. Can't begin to fathom how you're going to do the rest, though...

by **Deathknell** » Mon Apr 09, 2007 7:23 pm

Yeah I'm still working on that. I'm going to start working on the upper body this weekend. I think I'll probably pick up some bionicle bits this weekend and see how they work out.

by **TFLobo** » Mon Apr 09, 2007 11:57 pm

Looks great Deathknell! The details on the head is outstanding! Please keep us posted as the work progresses.

The leg transformation on Classics BB lends itself pretty well to the HOS version. Just a lot of detail work. But you got that down!

The arms shouldn't be too bad. Just mount the shoulder to the chest so they can fold down and over the legs in train mode. Luckily the chest is big enough to accomidate a hinge like that. Then detail up BB's arms and mount them in the shoulder pieces.

by **Deathknell** » Wed Apr 11, 2007 8:09 pm

OK I decided to start working on the Cow Catcher/Feet...

I picked up a Bionicle set last night. The first pic shows the pieces I used. Middle top is the Classics BB set of legs I'm reusing. I"ve already attached one foot. I had to cut out the black tube piece that runs between the two sides of the bottom of the leg (you can still see it on the left leg) On the left shows the piece I used to make the connector for the foot. I had to cut out the middle of th piece to make it smaller. ON the right is the Bionicle leg I used to make the foot. I cut the end off and trimmed off some of the edges to make fit scale wise. The ball joint fits right into the grey piece and is able to swivle up and down.

The following 3 pics shows the one complete foot attached to the leg. The grey pin will stay in place untill all the glue and epoxy sets up and is strong. Then I'll go in and trim it off leaving the rest of the pin in place. I can then use what I cut off to do the other foot.

Anyways once both feet are in place and secure I'll cut the pieces for the actual cow catcher that I will attach covering the top of the foot (the slanted edge). I'll probably hinge the outer sides so that that part can swing open like they do in the comic.

by **Autobot Shade 0066** » Wed Apr 11, 2007 9:39 pm

Im not seeing the pictures and its driving me crazy.

by **Deathknell** » Wed Apr 11, 2007 11:04 pm

Well that's odd. The new pics arn't terribly exciting. Just the first WIP of the legs. No real detailing yet. The leg's I think are going to be the most difficult.

by **TM Devastator** » Wed Apr 11, 2007 11:45 pm

I cannot see the pictures either, even if I copy the links to my address bar.

by **Pyroclasm** » Thu Apr 12, 2007 5:44 am

I see the pictures fine. Weird.

by **jimsloth** » Thu Apr 12, 2007 6:57 am

screwed up before, fixed now.

by **TM doomtron** » Fri Apr 13, 2007 4:56 pm

i love youre technique on the helmet sweet

by **Deathknell** » Fri Apr 13, 2007 6:00 pm

Update...

I finished the "skeleton" of his feet and his torso last night.

Nothing is attached permanently. I used a couple of little pieces of sculpty to hold things together for the pics. I still need to take the wheels off of the arms and do ALOT of skinning!

Lobo...notice the slots cut in the torso for the arms so they can fold completely forward and over the legs in Train mode. Good idea man!! Thanks!

OH yeah...notice the Datsun model in the background

AND I got my Alternator Silverstreak today!! Bluestreak is on his way!