>
>
>

Toyhax June Update!

Posted by ZeroWolf Jun 14, 2019 at 12:04pm CDT 18,501 views
This is not your typical Toyhax release.


We've never worked so hard on such a small pair of figures. Siege Lasebeak now has classic dual cannons, and his iconic G1 face, and Ravage's cassette mode looks like, well... a cassette!
https://toyhax.com/for-siege/2787-parts ... avage.html

Gen. Select's Ricochet small yellow flames just weren't cutting it for us. Take a look at our upgrades for him:
https://toyhax.com/for-potp/2789-labels ... epper.html

Check out our latest offering for UT Ragnaros, our set for Gahz'ranka:
https://toyhax.com/mp-scale/2782-labels ... ranka.html


What's so special about this release?


HEAPS AND HEAPS OF CEL SHADED WINDOW SETS!!!

Here you go Maketoys Downbeat, YOU get a cel shaded set!
https://toyhax.com/mp-scale/2781-labels ... ndows.html

Nobody's paid attention to you in years MP-09 Rodimus Prime. Here's some brand new windows!!

We're not done! 3 design variants, and 2 colour options for all of you MP Coneheads out there!
https://toyhax.com/for-masterpiece/2764 ... ype-e.html
https://toyhax.com/for-masterpiece/2763 ... ype-d.html
https://toyhax.com/for-masterpiece/2762 ... ype-f.html
https://toyhax.com/for-masterpiece/2761 ... ype-d.html
https://toyhax.com/for-masterpiece/2760 ... ype-e.html
https://toyhax.com/for-masterpiece/2759 ... ype-f.html

Looking real sharp FT Tesla! Probably because of that new WINDOW!!!
https://toyhax.com/mp-scale/2780-labels ... ndows.html

As for you, KFC Transistor, we've made 3 equally awesome variants for your chest window.
https://toyhax.com/mp-scale/2776-labels ... haded.html
https://toyhax.com/mp-scale/2775-labels ... d-csw.html
https://toyhax.com/mp-scale/2774-labels ... urple.html

And you get a cel-shaded windows set, FT Phoenix!
https://toyhax.com/mp-scale/2779-labels ... ndows.html

There's so many more! These are the rest of the figures we've covered: MP-22 Ultra Magnus, MT Gundog, XTB Savant, MMC Inventa, TW Devil/Evila Star, KFC Stratotanker, FT Apache and Rouge, FT Spindrift, MP SG Optimus Prime, FT Quietus, BC Brawny, BC Engineer Huff, IG Hench, XTB Paean and XTB Stax:
https://toyhax.com/for-masterpiece/2777 ... haded.html
https://toyhax.com/mp-scale/2773-labels ... g-csw.html
https://toyhax.com/mp-scale/2772-labels ... t-csw.html
https://toyhax.com/mp-scale/2771-labels ... a-csw.html
https://toyhax.com/mp-scale/2770-labels ... r-csw.html
https://toyhax.com/mp-scale/2769-labels ... r-csw.html
https://toyhax.com/mp-scale/2767-labels ... e-csw.html
https://toyhax.com/mp-scale/2766-labels ... t-csw.html
https://toyhax.com/for-masterpiece/2765 ... e-csw.html
https://toyhax.com/mp-scale/2768-labels ... s-csw.html
https://toyhax.com/mp-scale/2758-labels ... y-csw.html
https://toyhax.com/mp-scale/2757-labels ... f-csw.html
https://toyhax.com/mini-scale/2756-labe ... h-csw.html
https://toyhax.com/mp-scale/2755-labels ... n-csw.html
https://toyhax.com/mp-scale/2750-labels ... x-csw.html

We've also made a neat set featuring cel shaded windows for MS Light of Freedom:
https://toyhax.com/mp-scale/2783-labels ... eedom.html

And lastly, we've added labels for Studio Series Barricade and Jetfire to the site:
https://toyhax.com/for-movie-toys/2784- ... icade.html
https://toyhax.com/for-movie-toys/2754- ... tfire.html

Toyhax will have a booth at TFcon Toronto, the world`s largest fan run TF convention! Be sure to come by to say hi, and pick up a few label sets! https://www.tfcon.ca/

Name: Aaron Black
Company: Reprolabels Inc
E-mail: delta@reprolabels.com
Passcode: windsweeper

IP Address: 72.38.93.46
This message was sent from the following address:
www.seibertron.com/contact/index.php

** NOT LOGGED IN **

Yep, screenshot one of the sets and use it!
Show quoted text
Thanks D! I'm going to grab this now, are we newsing the TFSource sale or leaving it?
Hide quoted text

On Fri, 14 Jun 2019, 17:54 Dalton Mack, wrote:
Yep, screenshot one of the sets and use it!

On Fri, Jun 14, 2019, 12:53 PM Peter Martin wrote:
I'm assuming this is to be newsed but regarding the thumbnail, would I just take a picture of say the add on stickers for laser beak and ravage and use that?

---------- Forwarded message ---------
From: Aaron Black <4eb29f1d3e303b5b4432621cbf6ab8e6@seibertron.com>
Date: Fri, 14 Jun 2019, 15:18
Subject: News and Rumors: Toyhax.com June update!
To: News Staff


This is not your typical Toyhax release.


We've never worked so hard on such a small pair of figures. Siege Lasebeak now has classic dual cannons, and his iconic G1 face, and Ravage's cassette mode looks like, well... a cassette!
https://toyhax.com/for-siege/2787-parts ... avage.html

Gen. Select's Ricochet small yellow flames just weren't cutting it for us. Take a look at our upgrades for him:
https://toyhax.com/for-potp/2789-labels ... epper.html

Check out our latest offering for UT Ragnaros, our set for Gahz'ranka:
https://toyhax.com/mp-scale/2782-labels ... ranka.html


What's so special about this release?


HEAPS AND HEAPS OF CEL SHADED WINDOW SETS!!!

Here you go Maketoys Downbeat, YOU get a cel shaded set!
https://toyhax.com/mp-scale/2781-labels ... ndows.html

Nobody's paid attention to you in years MP-09 Rodimus Prime. Here's some brand new windows!!

We're not done! 3 design variants, and 2 colour options for all of you MP Coneheads out there!
https://toyhax.com/for-masterpiece/2764 ... ype-e.html
https://toyhax.com/for-masterpiece/2763 ... ype-d.html
https://toyhax.com/for-masterpiece/2762 ... ype-f.html
https://toyhax.com/for-masterpiece/2761 ... ype-d.html
https://toyhax.com/for-masterpiece/2760 ... ype-e.html
https://toyhax.com/for-masterpiece/2759 ... ype-f.html

Looking real sharp FT Tesla! Probably because of that new WINDOW!!!
https://toyhax.com/mp-scale/2780-labels ... ndows.html

As for you, KFC Transistor, we've made 3 equally awesome variants for your chest window.
https://toyhax.com/mp-scale/2776-labels ... haded.html
https://toyhax.com/mp-scale/2775-labels ... d-csw.html
https://toyhax.com/mp-scale/2774-labels ... urple.html

And you get a cel-shaded windows set, FT Phoenix!
https://toyhax.com/mp-scale/2779-labels ... ndows.html

There's so many more! These are the rest of the figures we've covered: MP-22 Ultra Magnus, MT Gundog, XTB Savant, MMC Inventa, TW Devil/Evila Star, KFC Stratotanker, FT Apache and Rouge, FT Spindrift, MP SG Optimus Prime, FT Quietus, BC Brawny, BC Engineer Huff, IG Hench, XTB Paean and XTB Stax:
https://toyhax.com/for-masterpiece/2777 ... haded.html
https://toyhax.com/mp-scale/2773-labels ... g-csw.html
https://toyhax.com/mp-scale/2772-labels ... t-csw.html
https://toyhax.com/mp-scale/2771-labels ... a-csw.html
https://toyhax.com/mp-scale/2770-labels ... r-csw.html
https://toyhax.com/mp-scale/2769-labels ... r-csw.html
https://toyhax.com/mp-scale/2767-labels ... e-csw.html
https://toyhax.com/mp-scale/2766-labels ... t-csw.html
https://toyhax.com/for-masterpiece/2765 ... e-csw.html
https://toyhax.com/mp-scale/2768-labels ... s-csw.html
https://toyhax.com/mp-scale/2758-labels ... y-csw.html
https://toyhax.com/mp-scale/2757-labels ... f-csw.html
https://toyhax.com/mini-scale/2756-labe ... h-csw.html
https://toyhax.com/mp-scale/2755-labels ... n-csw.html
https://toyhax.com/mp-scale/2750-labels ... x-csw.html

We've also made a neat set featuring cel shaded windows for MS Light of Freedom:
https://toyhax.com/mp-scale/2783-labels ... eedom.html

And lastly, we've added labels for Studio Series Barricade and Jetfire to the site:
https://toyhax.com/for-movie-toys/2784- ... icade.html
https://toyhax.com/for-movie-toys/2754- ... tfire.html

Toyhax will have a booth at TFcon Toronto, the world`s largest fan run TF convention! Be sure to come by to say hi, and pick up a few label sets! https://www.tfcon.ca/

Toyhax June Update!
Toyhax June Update!

More Bots. More News. More Awesome.

Re: Toyhax June Update! (view post)
Comment by DMSL Jun 14, 2019
I am hoping we will get more cardboard backdrops in the future.
Re: Toyhax June Update! (view post)
Comment by ZeldaTheSwordsman Jun 23, 2019
The SIEGE Prowl set could use a couple more parts: A triangular piece that plugs into the hole on top of his gun, and a larger, notched triangular piece that connects to the underside.
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Jun 30, 2019
A tad late seeing this thread but thought i would show off Siege Starscream and Soundwave. I really like the addition to Starscream, making it look more like the Tetrajet, rather than a Viper off of Battlestar Galactica.

I just ordered the Prowl and Laserbeak set!

SGM
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Jul 13, 2019
Just received the add on parts for Prowl and Laserbeak. I have not applied any stickers yet, just wanted to show off a couple of pictures first.

SGM
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Jul 15, 2019
UPDATE!

So I applied most of the stickers to Prowl. Have to say not bad! For Laserbeak, not too bad, may add some paint to his blasters to highlight them. I need to take a better photo of Laserbeak, i will add that tomorrow. Overall not bad! In addition, I added the stickers to Ravage but he is in cassette mode inside Soundwave.

SGM
Re: Toyhax June Update! (view post)
Comment by ZeldaTheSwordsman Jul 15, 2019
Ooh, nice Transformers Jr. Soundwave and Prowl :P
Re: Toyhax June Update! (view post)
Comment by ZeroWolf Jul 19, 2019
Presenting Toyhax's July 2019 release!

We'll begin with this month's heavy hitter, our set for Siege Jetfire! Our blend of greeble, G1 and Macross styled details does this figure wonders:
https://toyhax.com/for-siege/2791-label ... tfire.html

Image

Did you like our upgrades for Siege Starsceram? Thundercracker and Red Wing now sport the same kind of additions:
https://toyhax.com/for-siege/2793-label ... acker.html
https://toyhax.com/for-siege/2794-label ... -wing.html

Siege Red Alert looks like a good old fashioned futuristic Lambo fire chief car:
https://toyhax.com/for-siege/2790-label ... alert.html

Siege Galaxy Optimus Prime new labels look like they should have been there all along:
https://toyhax.com/for-siege/2792-label ... prime.html

With a lack of reference material, some of the female Autobots have been difficult to work on. We think we pulled it off well with Greenlight:
https://toyhax.com/for-siege/2804-label ... trike.html

G2 Swoop inspired labels for Pteraxadon, and some much needed color breaks for Aimless:
https://toyhax.com/for-siege/2802-label ... xadon.html

Big Powered gets some big love:
https://toyhax.com/for-classics/2795-ta ... wered.html

FT Quietus looked a little sparse, so we came up with this:
https://toyhax.com/mp-scale/2805-labels ... ietus.html

Throughout all of this, we're continuing work on our cel-shaded line! CW Devastator is by far our favorite of the new editions:
https://toyhax.com/for-comb-wars/2803-l ... r-csw.html

Plus, we've now covered UT Runman/Bluzzing, XTB Ollie, XTB Boost, BC Grump and Ace Tumbler.
https://toyhax.com/mp-scale/2801-labels ... n-csw.html
https://toyhax.com/mp-scale/2799-labels ... e-csw.html
https://toyhax.com/mp-scale/2797-labels ... ype-a.html
https://toyhax.com/mp-scale/2798-labels ... ype-b.html
https://toyhax.com/mp-scale/2800-labels ... p-csw.html
https://toyhax.com/mp-scale/2796-labels ... r-csw.html
Re: Toyhax June Update! (view post)
Comment by ZeldaTheSwordsman Jul 19, 2019
Re: the Galaxy Upgrade set, G1ish Cel-shaded windows instead of white overlays for the windshield frames (and the frames of the faux windshields on the solder armor) = fail (and honestly, those feel esp. out of place on that mold). The Skyfire, Red Alert, and Greenlight sets look great, the you-know-what on the first two notwithstanding. The Aimless and Pteraxodon set is cool, adds some delightful touches.
Re: Toyhax June Update! (view post)
Comment by Nathaniel Prime Jul 19, 2019
Ironically, Red Wing is not only the best version of the Seeker mold in my opinion, but also wears the tetra fin thing better too (not that I needed one for my seekers, I prefer the battleship Galactica look).

I'm kinda iffy on Cell shades windows. I like them, but I also like regular windows so...

But Galaxy Upgrade Prime doesn't suit them at all. It would be like putting them on a Bayformer.

The rest of the sets are pretty sweet, especially Jetfire. ;)^
Re: Toyhax June Update! (view post)
Comment by blackeyedprime Jul 19, 2019
Cell shaded devestator may be worth giving a go, haven't combined mine yet (I've not decided how or where they are being displayed yet) but the stickers may set it out from my NBK.
Re: Toyhax June Update! (view post)
Comment by The_Cryptid_Person Jul 19, 2019
When Toyhax had a 40% off sale earlier, I grabbed the Fort Max and Trypticon sets, among others. I'll post pics when they've arrived and I've applied them. Seems the discount decreased after this update, but that makes sense - they've added some neat new things
Re: Toyhax June Update! (view post)
Comment by ZeldaTheSwordsman Jul 19, 2019
Nathaniel Prime wrote:I'm kinda iffy on Cell shades windows. I like them, but I also like regular windows so...

But Galaxy Upgrade Prime doesn't suit them at all. It would be like putting them on a Bayformer.
Exactly. Personally, I think that instead of the hideously out-of-place cel-sjaded windows they should have done stickers to color the cab and faux-cab window frames, and a behind-the-"glass" sticker for the chest windows that showed Cybertron Optimus' matrix compartment. They really phoned that set in.
Re: Toyhax June Update! (view post)
Comment by Nathaniel Prime Jul 20, 2019
ZeldaTheSwordsman wrote:
Nathaniel Prime wrote:I'm kinda iffy on Cell shades windows. I like them, but I also like regular windows so...

But Galaxy Upgrade Prime doesn't suit them at all. It would be like putting them on a Bayformer.
Exactly. Personally, I think that instead of the hideously out-of-place cel-sjaded windows they should have done stickers to color the cab and faux-cab window frames, and a behind-the-"glass" sticker for the chest windows that showed Cybertron Optimus' matrix compartment. They really phoned that set in.


Or just make a set that makes his arms blue. So many opportunities...
Re: Toyhax June Update! (view post)
Comment by The_Cryptid_Person Jul 28, 2019
My big order arrived today! Started with Fort Max and *man* do those things need instructions. I think I did alright with the pictures on the webpage, but the numbering on later sets (pyro had it I think?) was sorely missed. Spent more time comparing window quantities and sizes than actually applying the darn things.
Didn't help that with the SDCC version half the sticker spaces were already covered by Hasbro's relatively unimpressive offerings... which I mostly left in peace since they were "premium exclusive" details
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Jul 31, 2019
Sweet, attach some pics if you get a chance. That’s one set I have been wanting to purchase!

SGM
Re: Toyhax June Update! (view post)
Comment by The_Cryptid_Person Aug 4, 2019
Anyone have thoughts on the Metroplex set? I'm thinking about purchasing it, but I'm unsure how many of the details are actually new versus how many just cover the Hasbro stickers
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Aug 6, 2019
Probably a late response @Latebrus-K to your post. I personally have not bought that set, kind of settled for the stickers he came with from Hasbro. Thought they are not bad, i guess it depends on what you prefer.

SGM
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Aug 12, 2019
Having read some thoughts about the set for the Galaxy Upgrade OP, i decided to buy them along with the set for Ironhide. I am good with both, to me they had alittle touch to them. I have the set for Cog but haven’t applied them yet, with the Jetfire set coming soon. Can’t wait for that one!
Thanks for looking,

UPDATE

Just finished Cog!

SGM
Re: Toyhax June Update! (view post)
Comment by SGMLordMirage Aug 19, 2019
Here he is with all stickers applied. Have to say this really enhances Jetfire, adding detail and color over all that white. I was planning on getting this set regardless but was able to snag it for 40% off. For my personal taste it looks awesome.

Thanks for looking,

SGM
Re: Toyhax June Update! (view post)
Comment by D-Maximal_Primal Aug 23, 2019
We're ending summer with a well rounded release that hits all the bases!

Our first upgrade kit, featuring 3 tail fin accessories, makes proper tetrajets out of the Siege Rainmakers:
https://toyhax.com/for-siege/2807-parts ... akers.html

Siege Springer gets a brilliant set, to match the fantastic that he is:
https://toyhax.com/for-siege/2806-label ... inger.html

We've also got some pretty inspired sets for both Siege Brunt and Lancer:
https://toyhax.com/for-siege/2810-label ... ancer.html
https://toyhax.com/for-siege/2811-label ... brunt.html

TR Trypticon gets his very own Chief of Engineering with this conversion set for Siege Brunt, into Deadlift:
https://toyhax.com/for-siege/2812-label ... dlift.html

Adding to our line of Cel-Shaded windows, we've finally covered MP Bumblebee:
https://toyhax.com/for-masterpiece/2815 ... e-csw.html

Toyhax has made a comeback with MMPR! Check out our sets for Zeo Megazord and Super Zeo Magazord:
https://toyhax.com/labels-for-mmpr/2808 ... azord.html
https://toyhax.com/labels-for-mmpr/2809 ... azord.html

There have been lots of requests for labels for ZT Kronos, we've happily obliged with this beast of a set:
https://toyhax.com/mp-scale/2816-labels ... ronos.html

Lastly, PE Black Jinrai gets some long awaited additions:
https://toyhax.com/standard-scale/2814- ... inrai.html
Patreon
Charge Our Energon Reserves. Join the Seibertron Elite.
Support SEIBERTRON™