Transformers and More @ The Seibertron Store
![Visit shop.seibertron.com to buy "CABLE #2 var X-Men 97 homage Marvel Comics 2024 (W) Nicieza (CA) Lupacchino"](https://www.seibertron.com/images/ebay/comic-books/marvel/x-men/cable/volume-6/02-var-homage/t-DSC07073.jpg)
![Visit shop.seibertron.com to buy "UNCANNY X-MEN #288 Marvel Comics 1992 (CA) Kubert 240427A"](https://www.seibertron.com/images/ebay/comic-books/marvel/x-men/uncanny-x-men/volume-1/288-240427A/t-DSC06348.jpg)
Moderator: Club and BotCon Forum Staff
D-Maximus_Prime wrote:Nemesis Primal wrote:Am I the only one who likes the CW Breakdown mold? Maybe not for Ravage, but in general I think it's a good mold.
I like it too, all things set aside. It makes a good arm for me, and Sunstreaker really pulls off the look well for it. It works for me
Quoting this to put it on most recent page as I'd also like to know. The head looks too wide in the mockup to fit where it needs to.Counterpunch wrote:A complicated head design in a figure with a confined space for that head to exist...this has not been an design approach that has worked well for the Club in the past.
Can anyone speak to how the QC process will work to avoid another potential misfire on a new head sculpt?
mataleben wrote:First of all, this Ravage looks really nice, and the Lamborghini inspired alt mode is awesome in black, although the dead end mold probably would have fit better for his robot mode.
Second of all, the theme name seems to strongly suggest the inclusion of the Tripredacus guys. So, with them and Ravage, that would make 4 of the 5 figures already for the combiner. Are there any other characters associated with Tripredacus?
william-james88 wrote:mataleben wrote:First of all, this Ravage looks really nice, and the Lamborghini inspired alt mode is awesome in black, although the dead end mold probably would have fit better for his robot mode.
Second of all, the theme name seems to strongly suggest the inclusion of the Tripredacus guys. So, with them and Ravage, that would make 4 of the 5 figures already for the combiner. Are there any other characters associated with Tripredacus?
Yes, Tarantulus, he was their spy.
mataleben wrote:william-james88 wrote:mataleben wrote:First of all, this Ravage looks really nice, and the Lamborghini inspired alt mode is awesome in black, although the dead end mold probably would have fit better for his robot mode.
Second of all, the theme name seems to strongly suggest the inclusion of the Tripredacus guys. So, with them and Ravage, that would make 4 of the 5 figures already for the combiner. Are there any other characters associated with Tripredacus?
Yes, Tarantulus, he was their spy.
That could be a cool last member, but considering they just did a Tarantulas recently in this style through the subscription service, I doubt they'll do him again this soon. I can't think of anyone else who would fit in at all, but I'm kind of a noob when it comes to beast wars.
Other than Tarantulas, other agents like Ravage include Onyx Primal, Flamewar, and Magmatron.mataleben wrote:Second of all, the theme name seems to strongly suggest the inclusion of the Tripredacus guys. So, with them and Ravage, that would make 4 of the 5 figures already for the combiner. Are there any other characters associated with Tripredacus?
Shadowman wrote:This is Sabrblade we're talking about. His ability to store trivial information about TV shows is downright superhuman.
Caelus wrote:My wife pointed out something interesting about the prehistoric Predacons. I said that everyone was complaining because transforming for them mostly consisted of them just standing up-right. She essentially said, 'So? That's what our ancestors did.'
steals_your_goats wrote:Sabrblade wrote:Found this digibash of the Dustup version of the Breakdown mold in grayscale with the Ravage head attached to it and I think the remolded fembot parts make it look a little nicer:
That's actually the dead end mold, but it does look nicer
Bounti76 wrote:steals_your_goats wrote:Sabrblade wrote:Found this digibash of the Dustup version of the Breakdown mold in grayscale with the Ravage head attached to it and I think the remolded fembot parts make it look a little nicer:
That's actually the dead end mold, but it does look nicer
Dustup is a retool of Dead End. The chest, in particular is slightly more curvaceous, fitting for a fembot, rather than the flat detailed sculpt of Dead End. That's also Dustup's weapon.
Delta Magnus wrote:This is because you are a hamhanded idiot.
steals_your_goats wrote:Bounti76 wrote:steals_your_goats wrote:Sabrblade wrote:Found this digibash of the Dustup version of the Breakdown mold in grayscale with the Ravage head attached to it and I think the remolded fembot parts make it look a little nicer:
That's actually the dead end mold, but it does look nicer
Dustup is a retool of Dead End. The chest, in particular is slightly more curvaceous, fitting for a fembot, rather than the flat detailed sculpt of Dead End. That's also Dustup's weapon.
I know he had said that it was the breakdown mold, that's the part I was correcting.
Bounti76 wrote:steals_your_goats wrote:Bounti76 wrote:steals_your_goats wrote:Sabrblade wrote:Found this digibash of the Dustup version of the Breakdown mold in grayscale with the Ravage head attached to it and I think the remolded fembot parts make it look a little nicer:
That's actually the dead end mold, but it does look nicer
Dustup is a retool of Dead End. The chest, in particular is slightly more curvaceous, fitting for a fembot, rather than the flat detailed sculpt of Dead End. That's also Dustup's weapon.
I know he had said that it was the breakdown mold, that's the part I was correcting.
Ahhh....my bad.
Delta Magnus wrote:This is because you are a hamhanded idiot.
william-james88 wrote:If ever Sabrblade decides to go on vacation, I am glad to know we can rely on you.
Hellscream9999 wrote:Looks, cool, shame about the inevitable price, and mold-fatigue
Delta Magnus wrote:This is because you are a hamhanded idiot.
steals_your_goats wrote:Hellscream9999 wrote:Looks, cool, shame about the inevitable price, and mold-fatigue
Yeah I've been wondering price myself. Is it safe to assume it'll be the same as their other combiner?
william-james88 wrote:If ever Sabrblade decides to go on vacation, I am glad to know we can rely on you.
Hellscream9999 wrote:steals_your_goats wrote:Hellscream9999 wrote:Looks, cool, shame about the inevitable price, and mold-fatigue
Yeah I've been wondering price myself. Is it safe to assume it'll be the same as their other combiner?
I would say that it would be more akin to the boxsets, while they fluctuate a bit from year to year, I think that it is safe to assume that it'll be $300+; definitely not worth it, especially since we've gotten so many of them;
might save up for the body, if it is megatron from sky lynx, but, I doubt it would be, the mold would be too 'new', wouldn't it? TT blastoff and bigroove might be eligible, for tarantulas and someone else
Delta Magnus wrote:This is because you are a hamhanded idiot.
steals_your_goats wrote:Hellscream9999 wrote:steals_your_goats wrote:Hellscream9999 wrote:Looks, cool, shame about the inevitable price, and mold-fatigue
Yeah I've been wondering price myself. Is it safe to assume it'll be the same as their other combiner?
I would say that it would be more akin to the boxsets, while they fluctuate a bit from year to year, I think that it is safe to assume that it'll be $300+; definitely not worth it, especially since we've gotten so many of them;
might save up for the body, if it is megatron from sky lynx, but, I doubt it would be, the mold would be too 'new', wouldn't it? TT blastoff and bigroove might be eligible, for tarantulas and someone else
Well they are using the onslaught mold for bludgeon and even though it's a remold it's still very new so they might be able to use skylynx. I'm going to wait and see what else is coming with it before I make a decision.
william-james88 wrote:If ever Sabrblade decides to go on vacation, I am glad to know we can rely on you.
Sustain wrote:I'm kind of hoping that Megatron will be the dragon over the Rex, but I'll take either.
william-james88 wrote:Sustain wrote:I'm kind of hoping that Megatron will be the dragon over the Rex, but I'll take either.
I dont know why we are talking about t-rexes and dragons, these are all vehicles. I mean skylynx' "robot mode" is a long neck dinosaur, his alt mode is the space shuttle. I dont see how you can make a megatron out of that. It would turn from a red space shuttle into a red space shuttle with legs and a neck and not have an actual robot mode?
Return to Convention and Event Forum
Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], Google Feedfetcher, Majestic-12 [Bot], MSN [Bot], Yahoo [Bot]