The Energon Pub

News Credits: 1 · Fri Mar 20, 2009 6:22 pm

The best use of that mold yet, bot mode looks real sharp.

I wish I had one.

News Credits: 1 · Fri Mar 20, 2009 6:35 pm

god how many time is this mold gonna be used!? :roll:

Fri Mar 20, 2009 6:46 pm

Now THERE is a repaint/retool of Cybertron CD Scattorshot that I would actually buy! =P~

Makes me long for the good old days (2000-2004) when pre-registration was a mere $40 ($20 bucks more got ya a shirt, too!) as opposed to $300+, the convention wasn't always in BFE in relation to Michigan, and the exclusives were actually affordable.
Ah, memories....

News Credits: 1 · Fri Mar 20, 2009 7:17 pm

Agent 007 wrote:god how many time is this mold gonna be used!?

I think it's unanimous. After BotCon is over we are all going to get together, storm the mfg plant and break the mold. And after we're done there we are going to beat the hell out of the mold-maker just for good measure.

News Credits: 335 · Fri Mar 20, 2009 7:49 pm

It looks great, however too many of this mould have been used in the last year. I do really like that they took an extra step and remoulded the head. It's easily the best look of all the versions of Scattorshot, I'd say even better then the original.

However the overkill of the mould makes me want this set LESS.

News Credits: 1 · Fri Mar 20, 2009 8:05 pm

I like it, I'm a fan of the mold, and so far this is the best item in the botcon set. IMO

I'm not paying those prices either, but I like this one & land shark.

Scourge is OK, but I think Kup is pretty lame.

News Credits: 335 · Fri Mar 20, 2009 8:13 pm

T-Macksimus wrote:
Agent 007 wrote:god how many time is this mold gonna be used!?

I think it's unanimous. After BotCon is over we are all going to get together, storm the mfg plant and break the mold. And after we're done there we are going to beat the hell out of the mold-maker just for good measure.

Now now, lets not hurt the poor guy. For all we know he's one the visionary that came up with Universe Cyclonus or Animated Magnus. If we're gonna beat someone lets pick someone outside of the fan scope... someone fetch me the address of K-Fed...

News Credits: 17 · Fri Mar 20, 2009 8:27 pm

Cobalt Prime wrote:Now THERE is a repaint/retool of Cybertron CD Scattorshot that I would actually buy!
Makes me long for the good old days (2000-2004) when pre-registration was a mere $40 ($20 bucks more got ya a shirt, too!) as opposed to $300+, the convention wasn't always in BFE in relation to Michigan, and the exclusives were actually affordable.
Ah, memories....

Now, if you are compare, you gotta do apples to apples. $300 is WITH the toys, the Friday preview and Friday night event. $40 at Otfcc was JUST the Registration. If you added the toys and other features you were well up over $150 and that was just with 2 toys.

Applesauce!

News Credits: 1 · Fri Mar 20, 2009 8:43 pm

Down_Shift wrote:Now now, lets not hurt the poor guy. For all we know he's one the visionary that came up with Universe Cyclonus or Animated Magnus. If we're gonna beat someone lets pick someone outside of the fan scope... someone fetch me the address of K-Fed...

ummm...o.k. But I still get to break the mold before we take down K-Fed right? I'm still gonna shake my finger at the mold guy so he know's we're all serious. Since the head is an improvement and they finally gave it a proper paint job I guess I can't be to harsh with the poor fella.

K-fed however, has no excuse... :twisted:

News Credits: 11 · Fri Mar 20, 2009 9:52 pm

Wow, that's a sweet repaint/remold.

News Credits: 26 · Fri Mar 20, 2009 10:31 pm

LOL another repaint of the mold that has two figures out in stores right now

News Credits: 6 · Fri Mar 20, 2009 10:32 pm

Sid Burn wrote:I have to figure Thunderclash as a classics prime repaint.

Pink windows, white and gold body etc etc.

keep my fingers crossed

So far all the Botcon figures have been TF:Cybertron repaints haven't they?

So I can't see them using a random Classics figure.

Leader-Class Cybertron Optimus, with his semi-esque look and his retractable mask would work, but he's almost certainly too big think.

The deluxe Armada Prime was repackaged in Cybertron with a cyberkey that could activate his minicon port. He's a truck, and since there's already a voyager class figure, a deluxe would make sense. But that would be a hell of a cop out.

Cybertron Defense Red Alert might be a good candidate, but they already remolded him for a Botcon, so I'm skeptical that it would be him.

Quickmix is a truck, but the similarity of the mold ends there. It would be a horrible fit. Plus, it's also a voyager figure.

Mudflap fits closer visually, and, in fact, may be the next best choice ruling out LC Optimus and CD Red Alert, but again, he's a Voyager.

The only thing I can think of that's left, is Dirtboss - a deluxe sized (monster) truck.

Edit:

Going way out in left field, maybe Thunderclash is a repaint of Cybertron Thunderblast. Wouldn't make much sense, but she is a deluxe sized Cybertron figure.

Fri Mar 20, 2009 10:40 pm

Pete@BotCon wrote:Now, if you are compare, you gotta do apples to apples. $300 is WITH the toys, the Friday preview and Friday night event. $40 at Otfcc was JUST the Registration. If you added the toys and other features you were well up over $150 and that was just with 2 toys.

Applesauce!

Ah, yes, that is quite true. However, if one did not necessarily give a hang about the repainted convention toys and wanted to blow that extra $260 bucks on the dealer floor, AND was content with the benefits and goodies of the pre-reg package offered at that time, $40 bucks was quite the value. Now, we don't really have that option-its either pony up big bucks or don't pre-register and wait in line at the door.
But alas, i'm drifting precariously off topic. #-o

Fri Mar 20, 2009 10:50 pm

Nice, I would buy that

Sat Mar 21, 2009 12:50 am

Nice color and camo scheme there. I think the only thing kinda against this figure is that it's a mold that's already been used three times, two really recently as part of Universe 2.0 alone. Then again, it is a pretty good mold.

News Credits: 5 · Sat Mar 21, 2009 2:07 am

Caelus wrote:Going way out in left field, maybe Thunderclash is a repaint of Cybertron Thunderblast. Wouldn't make much sense, but she is a deluxe sized Cybertron figure.

Highly unlikely. In the Convention Brochure, Kup refers to Thunderclash with a male pronoun twice... and I don't think you can confuse Thunderblast with a male.

I'd agree that Cybertron Optimus Prime would be a natural choice, given the overall design of the toy... though that would make this one of the biggest sets in a long while, in terms of the sheer size of the figures (2 deluxes, a voyager, an ultra, and a leader?)

I'm almost loathe to suggest it... but what about Energon Ironhide? You've got a big, tough vehicle, in a mold that (thankfully) hasn't been used in a good while.

Some recent speculation has included Universe 2.0 Onslaught... though that figure is very new, so I'm not sure if he's a feasible addition yet. Same could be said of Universe Inferno.

News Credits: 6 · Sat Mar 21, 2009 3:34 am

emeraldbeacon wrote:I'm almost loathe to suggest it... but what about Energon Ironhide? You've got a big, tough vehicle, in a mold that (thankfully) hasn't been used in a good while.

Some recent speculation has included Universe 2.0 Onslaught... though that figure is very new, so I'm not sure if he's a feasible addition yet. Same could be said of Universe Inferno.

I'm still convinced it's going to be a Cybertron figure, but if you were going to extend it back to Energon, then Inferno, Roadblock, and STD Optimus would work too.

News Credits: 8 · Sat Mar 21, 2009 4:33 am

Man that is awesome. Just another cool TF ill never have.

News Credits: 5 · Sat Mar 21, 2009 9:15 am

Caelus wrote:
emeraldbeacon wrote:I'm almost loathe to suggest it... but what about Energon Ironhide? You've got a big, tough vehicle, in a mold that (thankfully) hasn't been used in a good while.

Some recent speculation has included Universe 2.0 Onslaught... though that figure is very new, so I'm not sure if he's a feasible addition yet. Same could be said of Universe Inferno.

I'm still convinced it's going to be a Cybertron figure, but if you were going to extend it back to Energon, then Inferno, Roadblock, and STD Optimus would work too.

I don't see why they wouldn't go to Energon - they're already using Landmine from that line.

News Credits: 402 · Updated Oct 21, 2022

emeraldbeacon wrote:
Caelus wrote:
emeraldbeacon wrote:I'm almost loathe to suggest it... but what about Energon Ironhide? You've got a big, tough vehicle, in a mold that (thankfully) hasn't been used in a good while.

Some recent speculation has included Universe 2.0 Onslaught... though that figure is very new, so I'm not sure if he's a feasible addition yet. Same could be said of Universe Inferno.

I'm still convinced it's going to be a Cybertron figure, but if you were going to extend it back to Energon, then Inferno, Roadblock, and STD Optimus would work too.

I don't see why they wouldn't go to Energon - they're already using Landmine from that line.

My theory is Energon Rodimus.

News Credits: 14 · Sat Mar 21, 2009 1:09 pm

Mkall wrote:My theory is Energon Rodimus.

I second that.

Though a Repaint of Cybertron Prime would be much much cooler.

However I'd much rather see Hasbro do that for a retail release of the mold. So he's not as freaking expensive to get a hold of.

News Credits: 6 · Sat Mar 21, 2009 3:10 pm

emeraldbeacon wrote:I don't see why they wouldn't go to Energon - they're already using Landmine from that line.

Dang, I forgot about him! I concede the point!

The randomness of the character is just so forgettable.

But of course the two jets are Energon figures too. Duh. #-o

Mkall wrote:My theory is Energon Rodimus.

That's probably a good bet.

Everything else that leaps to mind (e.g. CD Hot Shot, Armada Overload) has been used already.

Sat Mar 21, 2009 4:57 pm

These figures are a bit of a dissapointment, compaired to the last couple of botcon sets as of late. I was sorta expecting more.

Sat Mar 21, 2009 8:21 pm

How many repaints is this mold getting this year? Sweet jesus.

News Credits: 1 · Sat Mar 21, 2009 10:06 pm

Caelus wrote:
emeraldbeacon wrote:I don't see why they wouldn't go to Energon - they're already using Landmine from that line.

Dang, I forgot about him! I concede the point!

The randomness of the character is just so forgettable.

But of course the two jets are Energon figures too. Duh.

Mkall wrote:My theory is Energon Rodimus.

That's probably a good bet.

Everything else that leaps to mind (e.g. CD Hot Shot, Armada Overload) has been used already.

I will say upfront that I have not done my homework as to what has been hinted at for the remainder of this set and I will risk sounding stupid anyway (neither the first nor last time for me) but would not Energon/Universe Snowcat qualify as an almost truck-like vehicle?
I admit that if it were used I would like to see it with a different head mold but the overall design of the vehicle would actually look quite good alongside the likes of Flak/CD Scattershot.
In all reality, those 2 along with Movie Wreckage and Universe Onslaught would themselves make for an awsome box-set for the general public and be well on the way to more affordable.
Like I said, I don't know the scope of whats involved with the BotCon set and all, but I am sure I will be educated very shortly.