The Energon Pub

News Credits: 131 · by **no-one** » Mon Jul 23, 2018 9:30 pm

Burn wrote:
carytheone wrote:It's kangaroo pinching time

W.T.F.

Cobotron made me do it :oops:

News Credits: 226 · by **Burn** » Mon Jul 23, 2018 9:37 pm

carytheone wrote:
Burn wrote:
carytheone wrote:It's kangaroo pinching time

W.T.F.
Cobotron made me do it

...plausible enough for me!

by **Judas_Warlord** » Tue Jul 24, 2018 2:11 pm

God bless Wal-Mart for picking up the slack where Toys R Us left off. TRU didn't even have the MMPR re-issue flip-changer figures. The only place I found them was at Wally World. (also, Hook & Scrapper are mis-transformed in that photo)

News Credits: 6188 · by **Va'al** » Tue Jul 24, 2018 5:03 pm

Couple of new videos from the con!

https://www.seibertron.com/transformers ... uzz/41674/

News Credits: 3618 · by **Seibertron** » Wed Jul 25, 2018 11:42 pm

SDCC 2018 EVENT GALLERY UPDATED WITH NEW AND CROPPED IMAGES!

Walmart exclusive Transformers G1 Reissues in vintage packaging - Now with over 130+ images!

News Credits: 60 · by **fenrir72** » Wed Jul 25, 2018 11:50 pm

Seibertron wrote:SDCC 2018 EVENT GALLERY UPDATED WITH NEW AND CROPPED IMAGES!

Walmart exclusive Transformers G1 Reissues in vintage packaging - Now with over 130+ images!

Did Hb say if they neutered Devastator's springs?

MyFigureCollection.net collection · by **Emerje** » Thu Jul 26, 2018 12:02 am

Huh. The Seeker Jet eye stickers usually look terrible, but that actually looks pretty good. I sense shenanigans at work unless they've redone the eye decals.

I am concerned about the way the torso is tilting back, I guess the mold wear hasn't been corrected.

Emerje

News Credits: 251 · by **Mindmaster** » Thu Jul 26, 2018 9:40 am

Emerje wrote:Huh. The Seeker Jet eye stickers usually look terrible, but that actually looks pretty good. I sense shenanigans at work unless they've redone the eye decals.

I am concerned about the way the torso is tilting back, I guess the mold wear hasn't been corrected.

Emerje

The new ones look tampo’d on. Which is fine by me, always thought the eye stickers looked weird.

News Credits: 101 · by **-Kanrabat-** » Thu Jul 26, 2018 7:23 pm

Mindmaster wrote:The new ones look tampo’d on. Which is fine by me, always thought the eye stickers looked weird.

Plus those blasted things are just IMPOSSIBLE to apply. I tried on my Encore starscream and my Platinum coneheads trio. Failed each times and it's the only sticker that never want to stick on.

News Credits: 60 · by **fenrir72** » Thu Jul 26, 2018 7:47 pm

-Kanrabat- wrote:
Mindmaster wrote:The new ones look tampo’d on. Which is fine by me, always thought the eye stickers looked weird.

Plus those blasted things are just IMPOSSIBLE to apply. I tried on my Encore starscream and my Platinum coneheads trio. Failed each times and it's the only sticker that never want to stick on.

I use a Swiss knife twizzer and toothpick, and a razor blade and cut around the pentahedron pattern. I don't use that dumbass nose part which ruins the appearance 8-}

If they are tampo'd, about time since Takara was able to implement it for Encore Meister's visor.

News Credits: 459 · by **Sabrblade** » Thu Jul 26, 2018 9:32 pm

fenrir72 wrote:
-Kanrabat- wrote:
Mindmaster wrote:The new ones look tampo’d on. Which is fine by me, always thought the eye stickers looked weird.

Plus those blasted things are just IMPOSSIBLE to apply. I tried on my Encore starscream and my Platinum coneheads trio. Failed each times and it's the only sticker that never want to stick on.

I use a Swiss knife twizzer and toothpick, and a razor blade and cut around the pentahedron pattern. I don't use that dumbass nose part which ruins the appearance

If they are tampo'd, about time since Takara was able to implement it for Encore Meister's visor.

And Encore Fort Max's eyes (despite their also including those eye stickers just in case someone feels masochist enough to try and put them on).

News Credits: 60 · by **fenrir72** » Thu Jul 26, 2018 10:47 pm

Sabrblade wrote:
fenrir72 wrote:
-Kanrabat- wrote:
Mindmaster wrote:The new ones look tampo’d on. Which is fine by me, always thought the eye stickers looked weird.

Plus those blasted things are just IMPOSSIBLE to apply. I tried on my Encore starscream and my Platinum coneheads trio. Failed each times and it's the only sticker that never want to stick on.

I use a Swiss knife twizzer and toothpick, and a razor blade and cut around the pentahedron pattern. I don't use that dumbass nose part which ruins the appearance

If they are tampo'd, about time since Takara was able to implement it for Encore Meister's visor.
And Encore Fort Max's eyes (despite their also including those eye stickers just in case someone feels masochist enough to try and put them on).

Fort Max is a cake walk. Speaking of Masochism, try the Autobot symbols of the original G1 Optimus Prime (Encore tampod them but also included them in the sheet and G1 Hotrod's thigh decals (Takara never fixed them, even for the Targetmaster TFC version). :-P

News Credits: 4862 · by **william-james88** » Fri Jul 27, 2018 10:05 am

The Transformers G1 Minibots are being reissued and while they have been available online, they have also been found in stores at Canadian Walmarts.

There are a few easter eggs (or interesting tidbits if you preffer) found behind the cards. Firstly, we see the Volkswagen logo behind Bumblebee's card, making it an officially licensed Volkswagen product. This is the first time we have ever seen this for the G1 Bumblebee toy and it is most probably due to Volkswagen's partnership this year with Paramount and Hasbro for all things Bumblebee.

Also, behind Outback's card, the instructions have Brawn instead of Outback, which we can tell from the robot face. Probably a mistake, but it could also hint at things to come by showing which other figures Hasbro intends to release if these reissues sell well enough.

News Credits: 19 · by **Carnivius_Prime** » Fri Jul 27, 2018 10:20 am

Did that G1 Bee reissue need the VW logo considering it's a cutesy rendition of a VW rather than accurate proportions? Is it just added there because Hasbro do have the rights to it now?

News Credits: 4862 · by **william-james88** » Fri Jul 27, 2018 10:21 am

Carnivius_Prime wrote:Did that G1 Bee reissue need the VW logo considering it's a cutesy rendition of a VW rather than accurate proportions? Is it just added there because Hasbro do have the rights to it now?

I guess its the same as all TLK BB and Optimus toys being officially licensed Western Star and Camaro products.

News Credits: 19 · by **Carnivius_Prime** » Fri Jul 27, 2018 10:23 am

william-james88 wrote:I guess its the same as all TLK BB and Optimus toys being officially licensed Western Star and Camaro products.

Yeah i mean could hasbro have reissued this toy whether they had the VW rights or not, and just added it there out of courtesy because of the masterpiece and movie VW toys?

News Credits: 4862 · by **william-james88** » Fri Jul 27, 2018 10:25 am

Carnivius_Prime wrote:
william-james88 wrote:I guess its the same as all TLK BB and Optimus toys being officially licensed Western Star and Camaro products.

Yeah i mean could hasbro have reissued this toy whether they had the VW rights or not, and just added it there out of courtesy because of the masterpiece and movie VW toys?

As I wrote in the news, its to celebrate the partnership between them and the company now that they are fully attached to all things BB this year.

News Credits: 3 · by **Giant Purple Griffin** » Fri Jul 27, 2018 1:56 pm

G1 Outback's instructions always had the Brawn face.

http://www.unicron.com/tfitem/itemimage ... ageID=1777

News Credits: 6188 · by **Va'al** » Fri Jul 27, 2018 2:14 pm

william-james88 wrote:
Carnivius_Prime wrote:
william-james88 wrote:I guess its the same as all TLK BB and Optimus toys being officially licensed Western Star and Camaro products.

Yeah i mean could hasbro have reissued this toy whether they had the VW rights or not, and just added it there out of courtesy because of the masterpiece and movie VW toys?

As I wrote in the news, its to celebrate the partnership between them and the company now that they are fully attached to all things BB this year.

Additional point: this year is the year we're getting all the G1 (1980s) reissues because... that's when the Bumblebee movie is set. So everything can tie in to Total Brand Awareness.

(Ryan made this point on the podcast too, I believe, but I first heard him say it as it hit his mind at the convention.)

News Credits: 3618 · by **Seibertron** » Fri Jul 27, 2018 8:17 pm

Carnivius_Prime wrote:
william-james88 wrote:I guess its the same as all TLK BB and Optimus toys being officially licensed Western Star and Camaro products.

Yeah i mean could hasbro have reissued this toy whether they had the VW rights or not, and just added it there out of courtesy because of the masterpiece and movie VW toys?

News Credits: 12 · by **nycPrime** » Fri Jul 27, 2018 11:06 pm

Submitted this as news, but I noticed TFW all over this already and it might be gone by the time it gets posted. Hot Rod is available for PO:

https://www.walmart.com/ip/Transformers ... ected=true

All I need is Bee and Devy and I'm set... please go back in stock!

News Credits: 3618 · by **Seibertron** » Fri Jul 27, 2018 11:17 pm

-Kanrabat- wrote:
Mindmaster wrote:The new ones look tampo’d on. Which is fine by me, always thought the eye stickers looked weird.

Plus those blasted things are just IMPOSSIBLE to apply. I tried on my Encore starscream and my Platinum coneheads trio. Failed each times and it's the only sticker that never want to stick on.

The trick is to use a pair of pointed/angular tweezers and to work around the nose first, pressing the sticker up against the upper nose and then working your way out to the sides of the eyes. Works like a charm every time!

News Credits: 102 · by **Qwan** » Sat Jul 28, 2018 1:54 am

A week after they all sold out the first time around, at least one of the Walmart-exclusive G1 reissue figures is back up for order on their website!

Hot Rod is available on the Walmart online store for pre-order (again) at $29.84 US. He's eligible for free shipping if the listing is to be believed, and is expected to ship out in late August, around the 20th-to-21st mark.

Let us know if you plan on picking this toy up, by posting about it in the Energon Pub Forums! Don't forget to let your fellow Seibertronians know if you notice any of the other reissue figures coming into stock during your browsing, too. And as always, stay tuned to Seibertron.com for always more Transformers news!