The Energon Pub

News Credits: 461 · by **mooncake623** » Tue Mar 10, 2015 10:32 am

They are supposedly getting rid of the rejects.

News Credits: 4 · by **Tsutsukakushi** » Tue Mar 10, 2015 2:20 pm

mooncake623 wrote: They are supposedly getting rid of the rejects.

Good to see X-T is taking this project very serious. Taking the extra time to weed out all of the factory rejects parts. Brings more buyers confidence to this toy.

by **MGrotusque** » Tue Mar 10, 2015 2:55 pm

That's a lot of rejects!! :shock:

But yes, it does instill some confidence. My MP megatron came bran new out of package missing parts and had the crapiest paint job ever.

News Credits: 4 · by **Tsutsukakushi** » Tue Mar 10, 2015 5:27 pm

MGrotusque wrote:That's a lot of rejects!!

But yes, it does instill some confidence. My MP megatron came bran new out of package missing parts and had the crapiest paint job ever.

Thinking when some of those imports sites opened up the boxes. to install those orange safety caps. That some parts might have fallen out or been taken.

My MP-05 had loose hips and ankles joints. That made displaying the robot toy a loose mess. Don't know if every toy was like this or if I got a bad QC toy.

News Credits: 5 · by **zodconvoy** » Tue Mar 10, 2015 5:45 pm

There needs to be a Brainstorm in that picture.

by **donny1975** » Tue Mar 10, 2015 6:55 pm

These being rejects seems kind of odd... I mean those are each a bunch of assembled components...so every single piece on all of those assemblies is a reject (from head to waist)?

News Credits: 767 · by **Dead Metal** » Wed Mar 11, 2015 4:20 am

Razzerian wrote:
leakin' lubricant wrote:Here you go

http://chimungmung.com

By far the cheapest option for a Takara MP-13.

That's indeed a great price, unfortunately as I said I'm a bit wary of ordering from outside of the EU at this point.

I bought a Hasbro MP-10 off eBay last year and a Takara MP-10 from BigBadToystore and got taxed on both which ammounted to 210 EUROS combined for both figures, that's a whole new Masterpiece right there!

So I'm a bit worried to order from Hong Kong as the Belgian customs will probably screw me again and I'll up paying 50 euros or something on import.

Chimungung marks his stuff as gift so you don't have to pay customs!

Seriously, barely any other store even does that anymore, but I haven't payed customs on a single order with them.

Like Blasphemous Prime on Facebook · by **Blasphemous Prime** » Wed Mar 11, 2015 10:30 pm

donny1975 wrote:These being rejects seems kind of odd... I mean those are each a bunch of assembled components...so every single piece on all of those assemblies is a reject (from head to waist)?

I would assume the rejects go to a line where the reject parts are removed and replaced. it's just a way of moving perfect assemblies faster, as opposed to stopping, holding up the line to fix a problem, then continuing.

News Credits: 33 · by **Genocide G2.0** » Thu Mar 12, 2015 4:37 am

Holes are now gone from the front crotch plate!

Demonstraiting the strength of the barrel hinge.

News Credits: 4 · by **Tsutsukakushi** » Thu Mar 12, 2015 12:46 pm

Thinking the ball jointed shoulder joints. Will give the shoulders amazing articulation.

by **Razzerian** » Thu Mar 12, 2015 6:56 pm

Any clue when they'll be shipping out?

News Credits: 1 · by **leakin' lubricant** » Fri Mar 13, 2015 4:36 am

Razzerian wrote:Any clue when they'll be shipping out?

Supposedly the end of the month, however some are speculating that it will most likely be early April.

News Credits: 33 · by **Genocide G2.0** » Fri Mar 13, 2015 9:02 am

leakin' lubricant wrote:
Razzerian wrote:Any clue when they'll be shipping out?

Supposedly the end of the month, however some are speculating that it will most likely be early April.

I'm expecting the end of April start of May :-?

News Credits: 33 · by **Genocide G2.0** » Sat Mar 14, 2015 11:12 am

News Credits: 4 · by **Tsutsukakushi** » Sat Mar 14, 2015 11:51 am

Think they did a great job with this pic. By showing that the toy can sit in a chair pose. Or showing the toy has great range of forward walking movenment in the legs.

News Credits: 15 · by **galvatron00** » Mon Mar 16, 2015 11:54 am

I've been on the fence for so long (probably TOO long at this point) with this figure, I've finally bit the bullet and pre-ordered it from BBTS. Super excited for my FIRST third party figure! I think I'm making a good decision

It's gonna be nice to retire my MP-05, he's got a mean lean going on and can't be displayed without some sort of prop-up (as I'm sure you all know too well).

by **Razzerian** » Mon Mar 16, 2015 11:59 am

Never bought MP-05, I had G1 Megatron as a kid and it was a horrible toy in my opinion, so easy to break, etc. and I felt that MP-05 looked scarily a lot like G1 Meg so never got it. Figured it'd be a waste of money.

News Credits: 4 · by **Tsutsukakushi** » Mon Mar 16, 2015 1:44 pm

itscramtastic wrote:I've been on the fence for so long (probably TOO long at this point) with this figure, I've finally bit the bullet and pre-ordered it from BBTS. Super excited for my FIRST third party figure! I think I'm making a good decision

Congrats on getting your first Third Party figure. Welcome to the club.

As far as picking your first Third party figure. Think you picked a great one.

X-T is taking this project serious. To ensure the released toy has no QC problems.

itscramtastic wrote:It's gonna be nice to retire my MP-05, he's got a mean lean going on and can't be displayed without some sort of prop-up (as I'm sure you all know too well).

My MP-05 had a lean also due to the over sized canon on the arm. The MP-05 toy I got always have loose joints in the legs and ankles.

Retired my MP-05 toy years ago. Put the toy back inside the box. As I had fears the fragile built toy would never pass the drop test. If it accidentally fell off my Five tier book shelf. The Rust on the feet and back bone was another reason I removed the toy from the self. Didn't want it to rust anymore than it already did.

Think Takara should have painted over the MP-05 Diecast parts. Maybe with a color like Silver or Grey. Or perhaps used a clear coat on the diecast parts to prevent rust from happening.

News Credits: 15 · by **galvatron00** » Mon Mar 16, 2015 2:15 pm

Tsutsukakushi wrote:
Congrats on getting your first Third Party figure. Welcome to the club.

As far as picking your first Third party figure. Think you picked a great one.

X-T is taking this project serious. To ensure the released toy has no QC problems.

Thanks!

My MP-05 has the rust as well and super loose joints, even without really touching the toy (never fully transformed due to a fear of breaking it as it seemed extra fragile :roll:

). Not sure what happened there, hopefully the MP-05 gold version won't have those issues for the fans who picked him up. I don't recall any of my G1 figures that have "exposed" diecast rusting..

Regardless, whenever Apollyon gets here it will be an exciting day for all of us!

News Credits: 1 · by **leakin' lubricant** » Mon Mar 16, 2015 6:22 pm

itscramtastic wrote:
Tsutsukakushi wrote:
Congrats on getting your first Third Party figure. Welcome to the club.

As far as picking your first Third party figure. Think you picked a great one.

X-T is taking this project serious. To ensure the released toy has no QC problems.

Thanks!

My MP-05 has the rust as well and super loose joints, even without really touching the toy (never fully transformed due to a fear of breaking it as it seemed extra fragile ). Not sure what happened there, hopefully the MP-05 gold version won't have those issues for the fans who picked him up. I don't recall any of my G1 figures that have "exposed" diecast rusting..

Regardless, whenever Apollyon gets here it will be an exciting day for all of us!

Indeed it will, I for one will be like a kid of Christmas Day when he arrives!

News Credits: 15 · by **galvatron00** » Mon Mar 16, 2015 8:34 pm

leakin' lubricant wrote:Indeed it will, I for one will be like a kid of Christmas Day when he arrives!

Is ReproLabels working on a set for this guy? I guess all I really need is a Decepticon sigil, but which ONE?!

by **User897** » Mon Mar 16, 2015 9:28 pm

itscramtastic wrote:Is ReproLabels working on a set for this guy? I guess all I really need is a Decepticon sigil, but which ONE?!

I sure hope they are. At first, I was thinking of getting ReproLabels with a white border so I could pick one that would look nice next to MP-10. But, I think I will go with a slightly larger one with a clear border.