>
shop.seibertron.com amazon.seibertron.com Facebook Twitter X YouTube Pinterest Instagram Myspace LinkedIn Patreon Podcast RSS
This page runs on affiliate links — your clicks may earn us a few Shanix. Want the full transmission? Roll out to our Affiliate Disclosure.

My first original Transformer! Yay for cheap G1 Gameboys!

Post all your customized Transformers here. Whether it's a small mod or a true kitbash, we'd love to see it!

My first original Transformer! Yay for cheap G1 Gameboys!

Postby TM Dark_Lord_Prime » Tue Nov 06, 2007 1:44 am

My local comic shop also sells video games and consoles, among other things like DVDs and books.

One day, I was there to get my weekly comics, and noticed they had two first-generation GameBoys for $3 each, and I was suddenly struck with a Real Gears inspiration, so I bought 'em both. :D

My first step was to measure one of the GB's, then create a cardboard mock-up, so I can work out the transformation and positioning of parts. Next, I had to figure out what to use for various parts, such as legs and arms, etc. Bionicles to the rescue!

After some experimentation, I've decided my best bet for his legs are "beast-type" (hey, it worked for Dropkick!), as shown here:

Image Image
Image Image


His feet are what I originally created for my project to re-shell an Alt Tracks with a G1-ish Corvette Stingray, but I determined that using an actual Alt Tracks was gonna end up being far more trouble than it was worth, so I reset my sights on an extra Side Swipe. That project is one of many currently on back burners.

I may end up using some other Bionicle feet, though, as these seem a bit small.

Anyway...my original GameBoy mock-up was made with printer card-stock, but that's too flimsy for this, so I've started re-doing it with some thin cardboard, instead. I've used hot glue to "spot-weld" the green pieces in place inside the GB shell pieces, and it's turning out pretty good so far. I'm gonna have to fiddle with the placement of the green bits though, 'cause the bottom of the GB is ending up slightly out of alignment with the top half.

I have no idea how the mock-up ended up so much taller than the real GB case, since I measured and re-measured at least twice, but there you go. *shrug*
It looks like I can just shorten the top a little when I remake it with the cardboard, though, without affecting anything else.

Image
Image Image
Image Image


After I tweak the positioning on those parts a bit, I'll move on to mounting the middle of the shell on his thighs. Then it's on to working on his arms and head!

I'm planning to make one an Autobot and the other a Decepticon, and my current backstory idea involves them being brothers. They were two of a series, and a single Spark accidentally got split between them. I'm not sure yet what that means for their minds/personalities, other than their disparate faction allegiences are a direct result.
Image
(new sig by Wingus)
TM Dark_Lord_Prime
Minibot
Posts: 135
Joined: Sun Feb 27, 2005 1:09 am
Location: Indiana

Postby BillyBadAss » Tue Nov 06, 2007 2:35 am

Great concept! I love this!
I love Nintendo - I love Transformers!!

I love you..?

Can't wait to see how this turns out..!!

.BBA

P.S. IMO - his brother should've been a Sega GameGear
BillyBadAss
Vehicon
Posts: 339
Joined: Mon Mar 12, 2007 2:45 am

Postby TM Dark_Lord_Prime » Tue Nov 06, 2007 2:37 am

Billybadass wrote:Great concept! I love this!
I love Nintendo - I love Transformers!!

I love you..?

Can't wait to see how this turns out..!!

.BBA

P.S. IMO - his brother should've been a Sega GameGear


I actually have one of those, but like I said, they were two of a series, i.e. the same model. Add to that the twin Spark thing.. :)

However, I might look at turning my Game Gear into a TF later on. Thanks for the idea! :)
Image
(new sig by Wingus)
TM Dark_Lord_Prime
Minibot
Posts: 135
Joined: Sun Feb 27, 2005 1:09 am
Location: Indiana

Postby rhinox555 » Tue Nov 06, 2007 4:22 am

Oh damn! you beat me two it :? ,i was going to do the same thing with a gameboy found at a pawn shop,except without the bionicle parts.
Still nice work though.
-Decepticon Rhinox of Transtopia
rhinox555
Transmetal Warrior
Posts: 835
Joined: Sun Jun 17, 2007 11:06 am
Location: Holland

Postby Skullgrin140 » Tue Nov 06, 2007 5:25 am

Wow, thats pretty neat. A gameboy TF :lol:
Image
Skullgrin140
Brainmaster
Posts: 1375
Joined: Wed Oct 20, 2004 11:18 am
Location: Chelmsford, United Kingdom

Postby Broadblasts short shorts » Tue Nov 06, 2007 10:07 am

Nice Ideas!!
Probably too early, but any Ideas for names??
you could go crazy and give them little game minions. If I remember correctly (and I usually don't) the games for the First Gameboy weren't too small.

edit-
MARIO AND WARIO!!!!!!!

sorry to keep interupting myself??? but you could also use the headphones as some kind of bola weapon.
Broadblasts short shorts
Minibot
Posts: 149
Joined: Thu Nov 16, 2006 5:28 am

Postby TM Dark_Lord_Prime » Tue Nov 06, 2007 1:46 pm

Roadblasters short shorts wrote:Nice Ideas!!
Probably too early, but any Ideas for names??


Right now, I'm just calling this one (the Autobot) "GameBot". I think I had an idea to call the Decepticon "PlayTron," at one point.

So far, those are the best I can come up with. :?
Image
(new sig by Wingus)
TM Dark_Lord_Prime
Minibot
Posts: 135
Joined: Sun Feb 27, 2005 1:09 am
Location: Indiana

Postby primezimm » Tue Nov 06, 2007 11:00 pm

Roadblasters short shorts Posted: Tue Nov 06, 2007 3:07 pm Post subject:

--------------------------------------------------------------------------------

Nice Ideas!!
Probably too early, but any Ideas for names??
you could go crazy and give them little game minions. If I remember correctly (and I usually don't) the games for the First Gameboy weren't too small.


It could be like soundwave. Maybe you can use a scrap lazerbeak or rumble. It would make an already cool project even better.
User avatar
primezimm
Fuzor
Posts: 238
Joined: Tue Jul 24, 2007 1:58 pm

Postby TM Dark_Lord_Prime » Wed Nov 07, 2007 12:01 am

primezimm wrote:
Roadblasters short shorts Posted: Tue Nov 06, 2007 3:07 pm Post subject:

--------------------------------------------------------------------------------

Nice Ideas!!
Probably too early, but any Ideas for names??
you could go crazy and give them little game minions. If I remember correctly (and I usually don't) the games for the First Gameboy weren't too small.


It could be like soundwave. Maybe you can use a scrap lazerbeak or rumble. It would make an already cool project even better.



Well, as plans stand now, I don't think I'm gonna have to sacrifice the cartridge slot. the sides of it may end up being part of his upper arms in bot mode, but I don't see why the slot wouldn't be able to hold a game pak.

And I can probably pick up a couple old GB carts at the comic shop for cheap; I'll have to look next time I'm there.

Ooh.. my Neoshifter turned out to be Leader Class sized when I put him together (way too big for the GB project, as that's gonna end up about as tall as Voyager Movie Prime, I think), but his minibot partner might work well if I decide to give the GBs transformable cartridges... *ponders*


Thanks for the ideas, guys! :D
Image
(new sig by Wingus)
TM Dark_Lord_Prime
Minibot
Posts: 135
Joined: Sun Feb 27, 2005 1:09 am
Location: Indiana

Postby REDLINE » Wed Nov 07, 2007 4:06 am

the cartridges are certainly a possibility. they're slightly thinner than the original casseticons, but they're also taller.
Image
REDLINE
Fuzor
Posts: 229
Joined: Thu Jul 28, 2005 2:06 am
Location: Missouri

Postby Nemesis Sturmvogel » Wed Nov 07, 2007 2:14 pm

Dark_Lord_Prime wrote:I'm just calling this one (the Autobot) "GameBot". I think I had an idea to call the Decepticon "PlayTron," at one point.


I got a better idea about the names

Autobot > Continue C-9
Decepticon > Game Over DT-X
Nemesis Sturmvogel
Headmaster Jr
Posts: 519
Joined: Sat Sep 20, 2003 2:21 pm

Postby TM Dark_Lord_Prime » Wed Nov 07, 2007 2:50 pm

Sturmvogel Prime wrote:
Dark_Lord_Prime wrote:I'm just calling this one (the Autobot) "GameBot". I think I had an idea to call the Decepticon "PlayTron," at one point.


I got a better idea about the names

Autobot > Continue C-9
Decepticon > Game Over DT-X


Hm.. I like GameOver.. what about One-Up 30X for the Autobot?

And do the C-9 and DT-X have any meaning?
Image
(new sig by Wingus)
TM Dark_Lord_Prime
Minibot
Posts: 135
Joined: Sun Feb 27, 2005 1:09 am
Location: Indiana

Postby Nemesis Sturmvogel » Thu Nov 08, 2007 7:10 pm

Dark_Lord_Prime wrote:
Sturmvogel Prime wrote:
Dark_Lord_Prime wrote:I'm just calling this one (the Autobot) "GameBot". I think I had an idea to call the Decepticon "PlayTron," at one point.


I got a better idea about the names

Autobot > Continue C-9
Decepticon > Game Over DT-X


Hm.. I like GameOver.. what about One-Up 30X for the Autobot?

And do the C-9 and DT-X have any meaning?


C = Continue/Credit, it can be also "Cybertron" like the R.I.D. Autobots (Sideburn C-004)

DT-X = Decepticon Transformer - 10
Nemesis Sturmvogel
Headmaster Jr
Posts: 519
Joined: Sat Sep 20, 2003 2:21 pm

Postby TM Dark_Lord_Prime » Sun Nov 11, 2007 10:17 pm

I thought you'd like a progress report:

I've had to scrap the leg part of the mock-up, 'cause I didn't think to take into consideration the shape of the left side (the speaker corner), so I'm re-building that part and re-working the positioning of the legs.

I've also decided the parts of the case with the d-pad and buttons will be attached to the bots' forearms, 'cause putting them on his thighs just won't work. After that comes the hard part--building the internals of his chest and figuring out how to mount the arms and head, while accomodating the screen(s) and cartridge slot, so they can carry their minion-bots.

I say "screen(s)" 'cause I'm considering making them interchangable, so I can change what's displayed on them, but that'll come after the main bot stuff is worked out.



What do you guys think of "One-Up 30X" ('cause he's a good guy, and the '30X' is sort of a reference to what happens in Contra when you enter the Konami code) and "GameOver D-86" ('cause he's a bad guy, and when you're killed, you've been 'eighty-sixed')?
Last edited by TM Dark_Lord_Prime on Mon Nov 12, 2007 7:16 am, edited 1 time in total.
Image
(new sig by Wingus)
TM Dark_Lord_Prime
Minibot
Posts: 135
Joined: Sun Feb 27, 2005 1:09 am
Location: Indiana

Postby Jin Saotome » Mon Nov 12, 2007 5:35 am

Ooh ooh! I wanna see how this turns out! A 1:1 scale Real Gear!
"If my father were alive, I could make him proud!"

Image
User avatar
Jin Saotome
Vehicon
Posts: 364
News Credits: 8
Joined: Wed Jul 11, 2007 4:04 am
Buy from Jin Saotome on eBay
Alt Mode: Mecha


Return to Customizations


[ Incoming message. Source unknown. ] No Signal - Please Stand By [ Click to attempt signal recovery... ]


Transformers and More @ The Seibertron Store

Visit shop.seibertron.com to buy "THE TRANSFORMERS Compendium TP Vol 01 Direct Market Image Comics 2025 0325IM840"
THE TRANSFORMERS C ...
Visit shop.seibertron.com to buy "TRANSFORMERS #22 Cvr E 1:50 Image Comics 2025 0525IM445 22E (CA) Parr"
TRANSFORMERS #22 C ...
Visit shop.seibertron.com to buy "Transformers WORST BOT EVER TPB Image Comics 2025 0425IM471 TP (CA) Marz Jr"
Transformers WORST ...
Visit shop.seibertron.com to buy "TRANSFORMERS #22 Cvr C 1:10 Image Comics 2025 0525IM443 22C (CA) Nakayama"
TRANSFORMERS #22 C ...
Visit shop.seibertron.com to buy "FCBD Transformers Worst Bot Ever Image Comics 2025 1224IM253 (CA) Marz Jr"
FCBD Transformers ...
Visit shop.seibertron.com to buy "TRANSFORMERS #22 Cvr D 1:25 Image Comics 2025 0525IM444 22D (CA) Yashiro"
TRANSFORMERS #22 C ...
Visit shop.seibertron.com to buy "TRANSFORMERS #13 Cvr D 1:25 Image Comics 2024 0824IM445 13D (CA) Fornes"
TRANSFORMERS #13 C ...
Visit shop.seibertron.com to buy "TRANSFORMERS #2 2nd ptg Cvr C Cliffjumper Image Comics 2023 (CA) Howard 250626"
TRANSFORMERS #2 2n ...
Visit shop.seibertron.com to buy "TRANSFORMERS #8 2nd ptg Cvr B Ultra Magnus Image Comics 2024 0524IM977 Howard"
NEW!
TRANSFORMERS #8 2n ...
Visit shop.seibertron.com to buy "Transformers WINDBLADE #4 con cvr Vol 2 IDW Comics 2015 convention"
NEW!
Transformers WINDB ...
Visit shop.seibertron.com to buy "TRANSFORMERS #2 2nd ptg Cvr A Duke Image Comics 2023 (CA) Howard 250626"
TRANSFORMERS #2 2n ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #1 40th Anniversary Cvr A Image Comics 2024 Skybound 01A"
NEW!
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "TRANSFORMERS #2 2nd ptg Cvr A Duke Image Comics 2023 1023IM897 (CA) Howard"
TRANSFORMERS #2 2n ...
Visit shop.seibertron.com to buy "TRANSFORMERS #11 Cvr A Image Comics 2024 Skybound 0624IM358 11A (CA) Johnson"
TRANSFORMERS #11 C ...
These are affiliate links. We may earn a commission.
Details subject to change. See listing for latest price and availability.

Featured Products on Amazon.com

Buy "Transformers Attacker 15 Kramer Action Figure" on AMAZON
Buy "Transformers Studio Series 09 Voyager Class Movie 2 Thundercracker" on AMAZON
Buy "Transformers Titans Return Repugnus, Dastard, and Solus Prime Prime Master" on AMAZON
Buy "Transformers Generations Power of The Primes Deluxe Class Autobot Moonracer" on AMAZON
Buy "Transformers Generations Titans Return Deluxe Windblade and Scorchfire" on AMAZON
Buy "Transformers: Generations Power of The Primes Legends Class Autobot Outback" on AMAZON
Buy "Transformers: Bumblebee -- Energon Igniters Nitro Series Optimus Prime" on AMAZON
Buy "Transformers Combiner Wars Blast Off Megatronus Prime Master" on AMAZON
Buy "Transformers: Generations Titans Return Legends Class Autobot Cosmos" on AMAZON
Buy "Potato Head Transformers Mixable Mashable Heroes as Optimus Prime and Grimlock Figures" on AMAZON
Buy "Transformers Generations Leader Class Armada Megatron Figure" on AMAZON
Buy "Transformers Generations Titans Return Titan Master Apeface" on AMAZON
These are affiliate links. We may earn a commission.
Details subject to change. See listing for latest price and availability.